|
| 1 | Earth work in excavation for structures in all depths as per drawing and technical Specificationclause 305.1 including setting out, construction of shoring and bracing, removal of stumps-and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated . Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall-be excavated with chiseling and wedging out rock(where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of useful materials for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner treaming filling of unevenness blindage and finishing of the road to specified dimension or as directed by the Engineerin-in-Charge. If the foundation-of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be remove by suitable diversion bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him in all cases. |
| 2 | Plain/Reinforced Cement Concrete M15 (Grade Fifteen) 40mm (Forty millimeter nominal size of aggregate ) in Open Foundation and below approach slab complete as per Drawing and Technical Specifications. Clause 1500, 1700 & 2100 including the cost of formwork. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 3 | Providing and laying Plain/Reinforced Cement Concrete M35 ( Grade Thirty Five) 20mm (Twenty millimeter nominal size aggregate) in Open Foundation complete as per Drawing and Technical Specifications. clauses 1500, 1700 & 2100 including the cost of formwor. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 4 | Supplying, fitting and placing HYSD bar reinforcement in Foundation complete as per drawings and technical specifications Clauses 1600. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 5 | Providing and fixing 25 mm (Twenty five millimeter) diameter 3 meter (Three meter ) long steel rock bolts including drilling 45 mm (Forty Five millimeter) dia holes, plate, nuts, cement grout, cost of all materials, machinery, labour, ventilation, lighting, drainage and all other ancillary operations etc. complete as per Drawing and Technical Specifications Clauses 2806 & 3200. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 6 | Providing and laying Plain/Reinforced cement concrete Grade M 35 (Grade Thirty Five ) 20mm (Twenty millimeter nominal size aggregate) in sub-structure complete as per drawing and Technical Specifications Clause 1500, 1700 & 2200 including the cost of formwork. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 7 | Providing and laying Plain/Reinforced cement concrete Grade M 40 (Grade Forty ) 20mm (Twenty millimeter nominal size aggregate) in sub-structure complete as per drawing and Technical Specifications Clause 1500, 1700 & 2200 including the cost of formwork . The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 8 | Supplying, fitting and placing HYSD bar reinforcement in substructrue complete as per drawings and technical specification Clauses 1600 & 2200. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 9 | Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 10 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm (Six hundred millimeter) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 11 | Providing and laying back filling with boulder-stones as per specification to a thickness of not less than 600mm (six hundred miillimeter)with similar size towards the soils and bigger size towards the wall and providing over the entire surface behind abutment wing wall return walls; to the full height-compacted to firm condition complete as per drawing and technical specification Rural Road. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 12 | Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm (one hundred millimeter) dia PVC pipe, extending through the full width of the structure with slope of 1V :20H(one vertical : twenty horizontal) towards drawing foce. Complete as per drawing and Technical Specifications. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 13 | Furnishing and Placing Plain / Reinforced cement concrete in super-structure as per drawing and Technical Specification Grade M 35 (Grade Thirty five) 20mm (Twenty millimeter nominal size aggregate) for Deck Slab. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 14 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification Section 1500,1600,1700 & 2704. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 15 | Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1600. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 16 | Providing Fabricated Structural Steel Truss For Super Structure as per drawing and Technical Specification. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 17 | Installation of Fabricated Structural Steel Truss For Super Structure as per as per drawing and Technical Specification. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 18 | Provision of an Reinforced cement concrete crash barrier at the bridge decks & approaches to bridge structures, constructed with Reinforced Cement Concrete with HYSD reinforcement conforming MoRT&H Specification and as per details given IRC -5 including dowel bars , expansion joints filled with pre-moulded asphalt filler board etc. and approved drawing and at locations directed by the Engineer, all as specified. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 19 | Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm (Seventy millimeter), complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 20 | Providing and laying bituminous concrete 40mm (Forty millimeter) thick with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (grade thirty) @ 5.2 Percent (Five point two percent) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 21 | Providing and laying 25 mm (Twenty Five millimeter ) thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm (Thirteen point two millimeter) nominal size at the rate of 0.005 cum (zero point zero zero five cubic meter) per 10 sqm (ten square meter) and at an approximate spacing of 10 cm (ten centimeter) center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000oC (one thousand degree celcius), protruding 1 mm to 4 mm (one millimeter to four millimeter) over mastic surface, all complete as per clause 516. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 22 | Providing and Fixing Drainage spouts complete as per drawing and technical specifications Clause 2705. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 23 | Providing and applying 2 (two) coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre (one litre) for 2 sqm (two square meter) as per drawing and technical specifications Clause 803. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. Please Enable Macros to View BoQ information |
