Tender For Providing & Installation Of One Nos. India Mark-Iii (65 Mm) Deepwell Hand Pump At Village Sandholi Gram Panchayat Haripur Sandholi Under Jsv Sub Division Baddi Division Baddi Distt. Solan (Hp) (Sh:- Drilling By Dth/Odex Percussion/ Clayx/R, Baddi-Himachal Pradesh
TDR : 55135763
Tender Notice
BOQ
11 Days Left
Baddi
Himachal Pradesh
Tender For Providing & Installation Of One Nos. India Mark-Iii (65 Mm) Deepwell Hand Pump At Village Sandholi Gram Panchayat Haripur Sandholi Under Jsv Sub Division Baddi Division Baddi Distt. Solan (Hp) (Sh:- Drilling By Dth/Odex Percussion/ Clayx/R
Name of Work:- Providing & Installation of One Nos. India Mark-III (65 mm) deepwell hand pump at village Sandholi Gram Panchayat Haripur Sandholi under JSV Sub Division Baddi Division Baddi Distt. Solan (HP) (SH:- Drilling by DTH/ODEX percussion/ clayx/RC portable rigs. 80 mtrs deep at Sandholi village in GP Haripur Sandholi).
Sl. No.
Item Description
1
Providing and installation of India Mark II (65mm), India Mark II (50mm) & India Mark-II extra deep (32mm) deepwell hand pumps as Per IS: 13056-1991 alngwith its upto date ammendments and IS: 9301 respectively comprising of following items:- Transportation of suitable truck mounted DTH & ODEX/ Percussion Calyx/ RC drilling rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per direction of Engineer-in-Charge.
2
Drilling bores of 152 mm dia as per IS: 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate, boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable store, bits, water, POL etc compelte with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia Advani Oerlikon electrodes with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer-in-Charge( MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately).
3
1X80 =80
4
Supplying and lowering of IS marked 125mm Nominal bore, 5mm thick fincut MSERW casing pipe as per IS 4270:2001 as per requirement of ODEX attachment from approved manufactures complete in all respects as per directions of Engineer-in-Chages .
5
1X80 =80
6
Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer-in-Charge.
7
Development of borewell and yield testing with air-compressor through V notch and disinfection etc. complete in all respects as per IS 2800 : 1979 and as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
