|
| 1 | M & L for excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in soft/loose soil |
| 2 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified |
| 3 | Material and labour for Modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in mortar CM 1:6, complete all as specified and as directed by Engr-in-charge. |
| 4 | M&L for rendering 15 mm thick on stone/brick masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces ) in cement mortar 1:4 finished even and smooth without using extra cement complete including dobbing coat out complete all as specified and directed by Engr-in-Charge. |
| 5 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc. complete all as specified and directed. |
| 6 | M&L 100 mm thick Cement concrete Type D2 1:4:8 (40mm graded stone aggregate) as in foundationn, filling and mass concrete, complete all as specified and as directed by Engr-in-charge. |
| 7 | Dismanteling MS works of any desc. not otherwise provided for complete all as specified. |
| 8 | S & F for Steel work in tubular section trusses, posts, gaurd bars including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 -1979 grade St.-240 and curved or parabolic shape for trusses, distance places, cleats etc(beam, tee, angle, channel ) etc. complete all as specified and as directed by Engr-In-Charge. |
| 9 | M & L Framed work as in doors or gates of angle or other section, hollow section with gusset plates, rail, braces, etcof Fe 290 Gde E 165 complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc.complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L for two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and directed by Engineer-in-Charge |
| 11 | M & L for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth complete all as specified and directed by Engineer-in-Charge |
| 12 | Providing cement concrete type B0 (12.5 mm graded aggregate) 1:2:4 in roof kerbs or mud stops, copings rounded or chamfered on edges, walls etc all as spd and directed by Engr-In-Charge. |
| 13 | S & F for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter concrete work , support for copings on wall, top of columns etc. complete all as specified and as directed by engr-in-charge. |
| 14 | Returning filling in including levelling, watering and ramming in layers n exc 25 cm thick in soil etc. complete as directed by Engr-In-Charge. |
| 15 | Removal of surplus soil to a distance n exc. 50 m & depositing where directed at a level n exc. 1.5 m above starting point etc. complete as directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
