|
| 1 | Repair to pot holes any depth n. exc 1 sqm each incl sweeping free from dust and mud, water scoring sunken surface in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling screened and graded road metal watering and well ramming (incl supply of road metal ) complete all as specified and directed. |
| 2 | M&L for premixed bituminous macadam laid/rolled and compacted to required gradient and camber with paving bitumen VG-30 with 4% binder content by weight of total mix with 8 to 10 ton power roller complete all as specified and directed. |
| 3 | Preparing the black top surfaces of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc, complete all as Specified and directed. |
| 4 | M & L for applying evenly a priming/tack coat with paving bituminous primer @ 5 kg/ 10 Sqm Grade VG-30 laying, for carriageway only complete all as Specified and directed. |
| 5 | M & L for bituminous premixed asphaltic semidansed comc, 40mm consolidated thickness, with 5.50% binder Grade VG-30 content (paving bitumen, any penetration) by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 6 | M&L for preparing bituminous surface of road and marking 1.5 mm thick centre lines, stop lines, dashes, arrows etc and line n exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed. |
| 7 | S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 8 | S & F in repairs solar stud/ cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of super bright LED with 10000 to 18000 mcd complete as per manufactures instruction etc, complete all as specified and directed. |
| 9 | S & F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 10 | Demolition of cement concrete in ground floors and paving n. exc 15cm thickness below or above ground level complete all as specified and directed. |
| 11 | Dismantling stone sett paving of laid dry or laid dry and pointed any description or thickness complete all as specified and directed. |
| 12 | S & F for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 13 | M & L for cement concrete type B1, 1:2:4 (20mm graded crushed stone aggregate) as in coping, bed block, water trought and similar works including rounding, chamfered and throating complete all as specified and directed. |
| 14 | M&L Consolidated thickness 75mm or less thick premix bituminous macadam laid/rolled & compacted to required gradient and camber using paving bitumen rolled with 8 to 10 tonne power roller complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
