|
| 1 | M&L for complete servicing of air conditioners and refrigerators/deep freezer, including taking down from the existing position, dismantling sheet metal parts, blowing out dust, and carrying out chemical cleaning of choked cooling coil and condenser coil by spraying diluted chemical cleaning agent until complete removal of choking. Flushing out oil deposits, cleaning all sheet metal parts, filters, and grills, refixing all dismantled parts with sheet metal screws, lubricating fan motor bushes/bearings, checking all electrical connections, renewing any burnt or pitted lugs/clips, refixing the unit in position and testing on full load, complete all as specified and as directed, for the following size:Note:- Gas charging, if required, shall be measured and paid for separately.(a) Window/Tower AC 1.5/2TR |
| 2 | (b) Split AC 1.5/2TR |
| 3 | (c) Refrigerator upto 180ltr. |
| 4 | (d) Refrigerator upto 310 ltr. |
| 5 | (e) Deep freezer of any capacity |
| 6 | Supply and fixing, as in repair, of single-shaft outdoor unit blower fan motor with blower fan, suitable for any make and model of split/vertical type air conditioner and water cooler of any capacity, single/double speed, single-phase, 230 volts AC, including taking down the unserviceable one, complete all as specified and as directed, for the following sizes:(a) Split AC 1.5TR |
| 7 | (b) Split AC 2TR |
| 8 | (c) Water Cooler 40-150 ltr. |
| 9 | Supply and fixing, as in repair, of blower fan motor with blower, suitable for any make and model of window type air conditioner of any capacity, single/double speed, single-phase, 230 volts AC, including taking down the unserviceable one, complete all as specified and as directed. |
| 10 | Supply and fixing, as in repair, of indoor swing motor suitable for any make and model of split/window type air conditioner, 12V DC, including taking down the unserviceable one, complete all as specified and as directed, for the following sizes:(a) Split AC 1.5TR |
| 11 | (b) Split AC 2TR |
| 12 | (c) Window type AC 1.5/2.0TR |
| 13 | Supply and fixing, as in repair, of fan blade suitable for existing model of outdoor unit of split type air conditioner and water cooler of any capacity, including taking down the unserviceable one, complete all as specified and as directed, for the following sizes:(a) Split AC 1.5TR. |
| 14 | (b) Split AC 2TR |
| 15 | (c) Window type AC 1.5/2.0TR |
| 16 | (d) Water Cooler 40-150 ltr. |
| 17 | M&L for rewinding of blower motor of window type air conditioner up to 2 TR capacity of any make, using super enamelled copper winding wire of suitable size and gauge, including varnishing, drying, baking, and insulation paper, replacement of GM bushes/bearings, reassembly, fixing in position, and testing on full load, complete all as specified and as directed. |
| 18 | M&L for rewinding of blower motor of split type air conditioner of any make, using super enamelled copper winding wire of suitable size and gauge, including varnishing, drying, baking, and insulation paper, replacement of GM bushes/bearings, fixing in position, and testing on full load, complete all as specified and as directed, for the following size:(a) Split AC 1.5TR. |
| 19 | (b) Split AC 2TR |
| 20 | Supply and fixing, as in repair, of running capacitors compatible with air conditioners and water coolers of any capacity, including taking down the unserviceable one, complete all as specified and as directed, for the following size:(a) 36 MFD to 50 MFD. |
| 21 | (b) 1.5 MFD to 10MFD. |
| 22 | Supply and fixing, as in repair, of Starting capacitors compatible with air conditioners and water coolers of any capacity, including taking down the unserviceable one, complete all as specified and as directed, for the following size:(a) 40/60 MFD to 80/100 MFD as per Existing sample and requirement. |
| 23 | (b) 50-120/150 MFD |
| 24 | Supply and fixing, as in repair, of outdoor condenser cooling coil made of copper tubes, suitable for split/ductable/vertical type ACs, including taking down the unserviceable one, complete all as specified and as directed, for the following size:(a) Split AC 1.5TR |
| 25 | (b) Split AC 2/3TR |
| 26 | Supply and fixing, as in repair, of indoor unit consisting of copper cooling coil for refrigerator of any make/model, including taking down the unserviceable one and making necessary connections of existing electrical cables and copper tubing, complete all as specified and as directed. |
| 27 | Supply and fixing, as in repair, including taking out the existing condensing unit of water cooler of any capacity, with evaporator of existing size and model, including necessary welding, brazing, leak testing, and testing on full load, complete all as specified and as directed. |
| 28 | Supply and fixing, as in repair, of heavy-duty air conditioner mounting bracket made of GI steel/MS with powder-coated finish, including taking down the unserviceable one, with all necessary nuts and bolts for mounting on existing surfaces and making good the existing surfaces, complete all as specified and as directed. |
| 29 | M&L for removing the old unservieable hermatically sealed compressor unit from water cooler of 40/80 Ltr to upto 150 Ltr and fixing new sealed unit reciprocating type hermatically sealed compressor or as per site sample including charging of suitable gas and oil to at adequate level complete all as specified and directed by Engg-in-Charge.Make:Danfoss/indofoss/Kirloskar/shriram |
| 30 | M&L for removing the old unservieable hermatically sealed compressor unit from Split AC of 1.5/2 TR and fixing new sealed unit reciprocating type hermatically sealed compressor or as per site sample including charging of suitable gas and oil to at adequate level complete all as specified and directed by Engg-in-Charge.Make:Danfoss/indofoss/Kirloskar/shriram |
| 31 | M&L for removing the old unservieable hermatically sealed compressor unit from Window AC of 1.5/2 TR and fixing new sealed unit reciprocating type hermatically sealed compressor or as per site sample including charging of suitable gas and oil to at adequate level complete all as specified and directed by Engg-in-Charge.Make:Danfoss/indofoss/Kirloskar/shriram |
| 32 | M&L for removing the old unservieable hermatically sealed compressor unit from Refrigerator 185/310 ltr and fixing new sealed unit reciprocating type hermatically sealed compressor or as per site sample including charging of suitable gas and oil to at adequate level complete all as specified and directed by Engg-in-Charge.Make:Danfoss/indofoss/Kirloskar/shriram |
| 33 | M&L for removing the old unservieable hermatically sealed compressor unit from Deep Freezer 285/300 ltr and fixing new sealed unit reciprocating type hermatically sealed compressor or as per site sample including charging of suitable gas and oil to at adequate level complete all as specified and directed by Engg-in-Charge.Make:Danfoss/indofoss/Kirloskar/shriram |
| 34 | M&L for Mes/SM no on water cooler/Acs/refregartor embossed in each units of suitable size as directed by engg-in-charge. |
| 35 | S&F Bib taps short body suitable size for water cooler of capacity 40/80 ltrs upto 150 ltrs as directed by Engg-in-charge. |
| 36 | M&L for repair of PCB board of indoor/outdoor compatible with split/vertical type air conditioners of any capacity, complete all as specified and as directed, for the following sizes:(a) Split AC 1.5/2.0 TR |
| 37 | (b) Inverter type indoor unit Split AC 1.5/2.0 TR |
| 38 | (c) Inverter type outoor unit Split AC 1.5/2.0 TR |
| 39 | (d) Window type AC/Deep freezer 1.5TR/2.0TR |
| 40 | Supply and fixing of New PCB board compatible with split/vertical type air conditioners of any capacity, including taking down the old unserviceable one, complete all as specified and as directed, for the following sizes:(a) Split AC 1.5TR |
| 41 | (b) Split AC 2TR |
| 42 | (c) Inverter type indoor unit Split AC 1.5TR |
| 43 | (d) Inverter type indoor unit Split AC 2TR |
| 44 | (e) Inverter type outoor unit Split AC 1.5TR |
| 45 | (f) Inverter type outoor unit Split AC 2TR |
| 46 | (g) Window type AC 1.5TR/2.0TR |
| 47 | (e) Deep freezer 280/300 ltrs |
| 48 | Supply and fixing, as in repair, of air filter compatible with the existing installation, including taking down the old unserviceable one, complete all as specified and as directed, for the following sizes:(a) Split AC 1.5TR. |
| 49 | (b) Split AC 2TR |
| 50 | (c) Window ac 1.5TR |
| 51 | Supply and fixing, in replacement, of indoor unit kit for split type air conditioner of capacity 1.5/2 TR, complete with PCB, sensor and fixing plate, suitable for exisiting type AC, including taking down the old unserviceable unit, complete all as specified and as directed. |
| 52 | Supply and fixing, in replacement, of outdoor unit kit for split type air conditioner of capacity 1.5/2 TR, complete with compressor, condenser coil, condenser fan with blade, and sensor, suitable for existing make and model AC, including taking down the old unserviceable unit, complete all as specified and as directed. |
| 53 | Supply and fixing, as in repair, of condenser line filter suitable for any size of window/split type air conditioner, including taking down the old unserviceable one, complete all as specified and as directed. |
| 54 | Supply and fixing, in replacement, of cordless remote control unit suitable for any make/model of split/window type air conditioner of 1.5/2 TR capacity, on existing location, complete all as specified and as directed. |
| 55 | M&L for Servicing of water cooler for any make including opening the machine on site removing the dust from body, cleaning condenser, cooling coil, fan/blower drum,water tank, oiling/greasing to fan motor, checking al the eleectrical connections necessary testing and commissioning complete all as specified and as directed.(a) Water cooler 40/80 ltr. |
| 56 | (b) Water cooler 60/120 ltr |
| 57 | (c) Water Cooler 150 Ltr |
| 58 | M&L for leak testing of ACs, refrigerators, and water coolers, including removal of existing refrigerant, thorough flushing of the refrigeration system with CTC and nitrogen gas, leak testing and locating of leaks, rectifying the same by brazing the joints, replacing damaged copper pipes with silver brazing rods/copper, pressure testing, dehydration, vacuumizing, gas charging, testing and commissioning of the system. The work shall also include provision of strainer, nitrogen gas, refrigerant gas, and all transportation and handling of the unit, complete all as specified and as directed by the Engineer-in-Charge, for the following size:Note:- Gas charging, if required, shall be measured and paid for separately.(a) Window AC 1.5/2TR |
| 59 | (b) Split AC 1.5/2TR |
| 60 | (c) Refrigerator 180/286/310 ltr. |
| 61 | (d) Water Cooler 40/80 & 60/120-150 ltr. |
| 62 | (e) Deep freezer of any capacity |
| 63 | M&L for copper brazing for jointing two copper tubes of any size in air-conditioning work, carried out carefully with all necessary safety precautions and testing, complete all as specified and as directed. |
| 64 | Supply and fixing, as in repair, of sheet metal enclosure with socket and plug top, single pole and neutral type, with two-pin and earth plug and socket, complete with one MCB SP of capacity 6 to 32 Amps, including taking down the old unserviceable one, complete all as specified and as directed. |
| 65 | Supply and fixing, as in repair, of PVC insulated, multistranded FRLSH copper conductor cable, 1100 volts grade, of size 2.5 Sqmm, 4 core, including taking down the old unserviceable cable, complete all as specified and as directed. |
| 66 | M&L for supply and fixing, as in repair, of copper tubing with flare fittings conforming to relevant IS, including taking down the old unserviceable one and providing nitrile insulation, complete all as specified and as directed, for the following sizes:(a) Copper tubing of size 1/2\\". |
| 67 | (b) Copper tubing of size 5/8\\" |
| 68 | (c) Copper tubing of 3/8\\". |
| 69 | (d) Copper tubing of size 1/4\\". |
| 70 | Supply and fixing, in replacement, of starting relay for water cooler, including taking down old unserviceable one, complete all as specified and as directed. |
| 71 | Supply and fixing, in replacement, of hose pipe 20 mm dia, synthetic PVC rubber corrugated type, of standard length, for water cooler, complete with two clamps (worm gear type), one on each side, including taking down old unserviceable parts, complete all as specified and as directed. |
| 72 | Supply and fixing, in replacement, of PVC pipe 20 mm dia, cotton braided type, for water cooler connection, including taking down old unserviceable one, complete all as specified and as directed. |
| 73 | Supply and fixing, in replacement, of MS clamp (worm gear type) 20 mm size for PVC pipe, including taking down old unserviceable one, complete all as specified and as directed. |
| 74 | Supply and fixing, as in repair, of self-closing tap, cast iron galvanised, chromium plated, screwed for iron pipe, suitable for water coolers, including taking down the old unserviceable one, complete all as specified and as directed. |
| 75 | Supply and fixing, as in repair, of spare parts of domestic refrigerator/deep frrezer, including taking down the unserviceable ones, all as per sample and as specified and directed for the following:(a) Thermostate switch. |
| 76 | (b) Starting Relay. |
| 77 | (c) Defrost timer |
| 78 | (d) Bimetal relay |
| 79 | (e) Defrost heater |
| 80 | (f) Fan motor assy along with fan blade |
| 81 | (g) over load protection for refrigerator |
| 82 | (h) PTC relay |
| 83 | (i) Condenser line filter for Refrigerator |
| 84 | Supply and charging of Refrigerant gas (Mefron/Refron) to existing Window/Split/Tower type air conditioners of any capacity, including rectification of leakage, if any, and testing for proper operation, complete all as specified and as directed, for the following size:Note: (i) Empty gas cylinder shall be returned to the contractor.(a) R-22/R-32 |
| 85 | (b) R-134a/R-407 |
| 86 | M&L for servicing and painting of desert cooler installed at site, including taking down old unserviceable parts, cleaning the equipment with air blower and wiping, dry and wet cleaning of body and louvers, preparing the surface with soft wire brush, applying one coat of synthetic enamel paint, checking control wiring, fan motor and tullu pump, and cooler body, oiling the pump and motor, complete all as specified and as directed:- |
| 87 | Supply and fixing, in replacement, of Blower motor 230 Volts, AC, 50 Hz, single phase, complete with blower fan, suitable for desert cooler of existing make and size, including taking down old unserviceable motor, complete all as specified and as directed.Make: AUE / Universal / Khaitan / Bajaj |
| 88 | Supply and fixing, in replacement, of pump motor (Tullu pump) 1/26 HP, 230 Volts, single phase, 1440 RPM, suitable for desert cooler, including taking down old unserviceable one, complete all as specified and as directed. |
| 89 | Supply and fixing, in replacement, of wood wool pad set, suitable for heavy duty desert cooler, including taking down old unserviceable one, complete all as specified and as directed. |
| 90 | Supply and fixing, in replacement, of GI socket 15 mm dia, fixed in position, including taking down old unserviceable one, complete all as specified and as directed. |
| 91 | Supply and fixing, in replacement, of selector switch combination of four switches (for low, medium, high, and pump on/off) suitable for desert cooler, as per sample, including taking down old unserviceable one, complete all as specified and as directed. |
| 92 | M&L for replacement of rusted desert cooler body of desert cooler capacity upto 4000 Cum/hr with front grill and three side louver fabricated out of 22 gauge mild steel plan black sheet and bottom water tank(sump) of size matching with existing fabricated out of 20 gauge mild steel plan black sheet including taking out and reinstallation complete with standard fitting such as PVC pipe for water,electric control and swtich etc including tullu pump.External surface shall be spray painted over a coad red oxide primer and internal surface of body cooler pump as dircted bt Engg-in-Charge. |
| 93 | M&L for replacement of frontgrill including control panel prewired for desert cooler of capacity upto 4000 Cum/hr as per sample complete and all as specified and directed by engg-in-charge. |
| 94 | Supply and fixing, in replacement, of 3-pin top plug, 220 Volts, of the following sizes, including taking down old unserviceable ones, complete all as specified and as directed:(a) 3-pin top plug 220 Volts, 5 Amps |
| 95 | (b) 3-pin top plug 220 Volts, 15 Amps |
| 96 | Supply and fixing, in replacement, of automatic voltage stabilizer, single phase, 50 Hz, complete with time delay relay and auto cut-off in the event of low/high voltage, including taking down the old unserviceable stabilizer, providing necessary incoming/outgoing electrical connections, testing and commissioning, all as per the following parameters:-(i) Incoming voltage: 140 V to 200 V(ii) Stabilized voltage: 230 V ± 5%complete all as specified and as directed, for the following sizes:(a) 3 KVA capacity |
| 97 | (b) 5 KVA capacity |
| 98 | M&L for re-winding of main transformer of voltage stabilizer with super enamelled copper winding wire of suitable gauge, including making necessary connections by soldering, testing and commissioning, complete all as specified and as directed, for the following sizes:(a) 3 KVA capacity |
| 99 | (b) 5 KVA capacity |
| 100 | Supply and fixing in replacement of relay for voltage stabilizer, 240 volts, as per sample, complete all as specified and as directed. |
| 101 | Supply and fixing, in replacement, of the following parts for voltage stabilizer, including taking down old unserviceable ones, complete all as specified and as directed.(a) Timer circuit as per sample |
| 102 | (b) Connector porcelain type as per sample |
| 103 | Supply and fixing, in replacement, of drain hose pipe, 3 metre long, suitable for air conditioners/water coolers, including taking down old unserviceable one, complete all as specified and as directed. |
| 104 | Supply of Methyl Acetylene and Propadiene (MAPP) gas cylinder of 400 grams capacity (flame gas) for copper brazing work, complete all as specified and as directed.Note:- The empty gas cylinder shall be returned to the contractor. |
| 105 | M&L for taking down Split/Window type air conditioner and shifting the same from one location to another within the premises, including dismantling and refixing of indoor and outdoor units with copper tubing, indoor mounting plate, and all necessary accessories, and making good the disturbed surfaces with cement plaster and POP, complete all as specified and as directed. |
| 106 | Supply and fixing, in replacement, of wall stand/chauki stand made of metallic steel for mounting outdoor unit of Split/Cassette type air conditioner, including suitable fasteners up to 8 mm size for fixing, and taking down old unserviceable parts, complete all as specified and as directed. |
| 107 | Supply and fixing, in replacement, of metal clad socket with two-pin and earth plug top, complete with single pole MCB 240 Volts, 20 Amps capacity, including taking down old unserviceable one, complete all as specified and as directed. Please Enable Macros to View BoQ information |
