|
| 1 | Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/unloading by skilled labour, to & fro cartage along with replacement of its parts/accessories i/c gland plate/spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing, replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects. (Make: Kirloskar) |
| 2 | Having suction of 125 mm (Model no. SHM 100/26) |
| 3 | Having Suction of 150 mm (Model No. SHM 150/26) |
| 4 | Having suction of 250 mm (Model no. MF 25/25) |
| 5 | Replacement of bearing of following dia/models of storm water pump etc. as required. (Make: Kirloskar) |
| 6 | Having suction of 125 mm (Model no. SHM 100/26) |
| 7 | Having Suction og 250 mm (model No. MF 25/25) |
| 8 | Replacement of shaft of following dia/models of storm water pump etc. as required. (Make: Kirloskar) |
| 9 | Having Suction og 250 mm (model No. MF 25/25) |
| 10 | Replacement of shaft sleeve of following dia/models of storm water pump etc. as required. (Make: Kirloskar) |
| 11 | Having suction of 125 mm (Model no. SHM 100/26) |
| 12 | Having Suction of 150 mm (Model No. SHM 150/26) |
| 13 | Having suction of 250 mm (Model no. SHM 150/26) |
| 14 | Replacement of Impeller of following dia/models of storm water pump etc. as required. (Make: Kirloskar) |
| 15 | Having suction of 125 mm (Model no. SHM 100/26) |
| 16 | P&F of M.S.Black pipe confirming to IS: 3589 Gr. 330 with Packing Sheets etc as Required of Following Dia. |
| 17 | 150 MM (5.4 mm thickness) |
| 18 | P & F of M.S. Flange with required nut bolts & packing sheet etc complete as required of following Dia:- |
| 19 | 150 mm (10 mm thickness) |
| 20 | P & F of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:- |
| 21 | 150 mm short bend C-class |
| 22 | Repalcement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required. |
| 23 | 150 mm |
| 24 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer using structuralsteel etc. as required. |
| 25 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources |
| 26 | Kirloskar Make 82.5 KVA Capacity DG Set |
| 27 | Providing of Primary Element (3H.132,01,0.00)for kirloskar make 82.5 KVA Capacity |
| 28 | Providing of Secondary Element (3H,132.02.0.00) for Kirloskar Make 82.5 KVA Capacity |
| 29 | Providing of Spin on Lube Oil Filter (06.436.01.0.00) for Kirloskar Make 82.5 KVA Capacity |
| 30 | Providing of Kirloskar care Premium Oil 13 ltr can (82.060.10.0.13) for Kirloskar Make 82.5 KVA Capacity |
| 31 | Providing of Kirloskar care Coolant Premix 5 ltr can (82.020.35.1,05) for Kirloskar Make 82.5 KVA Capacity |
| 32 | Providing of Primary Element for KFA-01-7221 (6H.411.02.0,00) for Kirloskar Make 82.5 kVA Capacity |
| 33 | Providing of Fuel Pipe- Pump to Filter (475 Hose Length) (4H.1266.01.0.00) for Kirloskar Make 82.5 KVA Capacity |
| 34 | Providing of Fuel Pipe Filter to Fip (4H.t266.02.0.00) for Kirloskar l1ake 82.5 KVA Capacity |
| 35 | Providing to -fuel Pipe Inlet: M14 x M14 Bunjo Both side 90OL (4h.896,09.0.00) for Klrloskar Make 82,5 KVA Capacity |
| 36 | Providing of Conservation kit From KG 934 to KG 645 for Klrloskar Make 82,5 KVA Capacity |
| 37 | providing of Lugs Battery Cable (LPU.ELE.08.0.00) for Klrloskar Make 82,5 KVA Capacity |
| 38 | Post warranty Labour Charges (99.0PW.01.0.00) for servicing of DG set |
| 39 | Providing and fixing following rating and breakingcapacity and pole MCCB with thermomagnetic releaseand terminal spreaders in existing cubicle panel boardincluding drilling holes in cubicle panel, makingconnections, etc. as required |
| 40 | 200 A ,36 KA ,FPMCCB |
| 41 | Kirloskar Make 125 KVA Capacity DG Set |
| 42 | Providing of Primary Element (3H.132,01,0.00)for KG 125 WS-3 125 KVA |
| 43 | Providing of Secondary Element (3H,132.02.0.00) for KG 125 WS-3 125 |
| 44 | Providing of Spin oil Lube oil Filter (06.436.01.0.00) for KG 125 WS-3 125 KVA |
| 45 | Providing of Hose for thermostat to water tank (F6.255.06.0.00) for KG 125 WS-3 125 KVA |
| 46 | Providing of Hose (F6.377.08.0.00) for KG-125 WS-3 125 KVA |
| 47 | Providing of Hose (F6.150.03.0.00) for KG-125 WS-3 125 KVA |
| 48 | Providing of Hose Clip (30.650.02.0.00) for KG-125 WS-3 125 KVA |
| 49 | Providing of Hose T- Bolt Clamp (4H.1412.24.0.00) for KG 125 WS-3 125 KVA |
| 50 | Providing to -fuel Pipe Inlet: M14 x M14 Banjo Both side 900L (4h.896,09.0.00) for KG 125 WS-3 125 KVA |
| 51 | Providing of Fuel pipe inlet : M15 X 1.5 Banjo Both side 650 mm (06.718.11.0.00) for KG 125 WS-3 125 KVA |
| 52 | Providing of Lugs Battery Cable (LPU.ELE.08.0.00) for KG 125 WS-3 125 KVA |
| 53 | Providing of Exide Battery 150 AH for Kirloskar MakeModel No. 4R1040 -82.5 KVA |
| 54 | Providing of Kirloskar care premium Oil 20 ltr can (82.060.10.0.20) for KG 125 WS-3 125 KVA |
| 55 | Providing of Kirloskar care premium coolant 10 ltr can (82.020.35.1.10) for KG 125 WS-3 125 KVA |
| 56 | Post warranty Labour Charges (99.0PW.01.0.00) for DG Set Servicing for KG 125 WS-3 125 KVA Please Enable Macros to View BoQ information |
