Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Total of Schedule-A, B, C and D (NDSR Items) + Schedule-B (DSR-2023 Items) |
| 2 | Total of Schedule-A(NDSR Items) |
| 3 | Total of Schedule-B(NDSR Items) |
| 4 | Total of Schedule-C(NDSR Items) |
| 5 | Total of Schedule-D(NDSR Items) |
| 6 | Total of Schedule-E(DSR-2023) OCW-2196 APPENDIX- 3A PROFORMA FOR STATEMENT OF MINOR DEVIATIONS (Refer Clause C 2.2 (d) and C 15.1 of ITT) 1. The following are the particulars of minor deviations from the requirements of the Tender Document: Sr. No Clause Deviations Price reduction for each deviation/s Note : 1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer. 2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents. 3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid. 4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect. Signature of authorized signatory On behalf of Tenderer OCW-2196 Preamble |
| 7 | The Bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to Tenderers, General and Special Conditions of Contract, Employer's Requirement and Technical Specification and other relevant documents. |
| 8 | BoQ1 consists of Schedule-A to Schedule-D (NDSR Items) And Schedule-E (DSR Civil 2023 Items) |
| 9 | The rates and prices to be tendered in the unit Priced Bill of Quantities ofSchedule-A to Schedule-D (NDSR Items) And Schedule-E (DSR Civil 2023 Items) are for completed and finished items of works and complete in all respect. |
| 10 | Tenderers shall quote their offer in Indian Rupees (INR) only. Tenderers are required to be quoted percentage (%) Excess/Less for schedule-A, B,C, D & E in figures in the appropriate highlighted cells in the BoQ1 sheet. All the quoted rates will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/ overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.5 of ITT & clause 10 of SCC. |
| 11 | The price offer in the BOQ shall be given without considering any deviation mentioned in Appendix-3 of FOT i.e. price in the box shall be quoted as per tender conditions without any deviation. |
| 12 | If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non- responsive and shall be rejected. |
| 13 | Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions. |
| 14 | The Financial Proposal (as per BOQ) shall be uploaded online on the website http://etenders.gov.in/eprocure/app. The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates against each highlighted cells in BoQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission. |
| 15 | The actual work executed against all the BOQ as detailed in tender document would be paid on measurement basis. |
| 16 | The contractor may raise their “On Account” payments on monthly basis as per the status of work on the last day of the respective month as per relevant clause of SCC. |
| 17 | In case of DSR item the description is given in brief and detailed description of item should be as given in DSR 2023 (Civil) (published by CPWD). Please Enable Macros to View BoQ information DELHI METRO RAIL CORPORATION LIMITED BOQ OCW-2196 - Supply, Installation, Testing and Commissioning of 72 KLD ETP (Effluent Treatment Plant), 10 KLD ETP (Effluent Treatment Plant) and 10 KLH WTP (Water Treatment Plant) at SLTD (Sultanpur Depot) and 2 Nos. of STPs (Sewage Treatment Plant) of 95 KLD at Millennium City Centre Gurugram Metro station of Line-2 (south) of DMRC. S.No. Item No. Description of Item Unit Qty. Rate (₹ Including GST) Rate (₹ Excluding GST) Amount (₹ Including GST) Amount (₹ Excluding GST) Remarks SCHEDULE-A (NDSR ITEMS) (ETP 72 KLD) |
| 18 | NDSR-1 Providing & fixing of Bar Screen Chamber 1No. Stainless Steel (SS304) Perforated, Corrugated Bar Screen Chamber with suitable lifting arrangement of (size 300 mm wide x 300 mm high approx) Type-Effluent below bar screen,Capacity-10 cum, Dimension-0.6M X 0.4M X 0.6M(SWD). Solid objects of size 50 mm or above should be removed. MOC:SS,Equivalent, Make: Jindal/Equivalent. Each 1.0 113930.18 96551.0 113930.18 96551.0 |
| 19 | NDSR-2 Providing & fixing of COAGULATION ( PRIMARY REACTION CUM SETTLING TANK), & FLOCCULATION (SECONDARY REACTION CUM SETTLING TANK) Tanks, Inclined at 60 Deg., Moc:6MM The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2MM FRP coating and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go the MBBR 1&MBBR 2 Tank. Make:-Jindal/Equivalent, Capacity- 10000Ltr, The MS sheet thickness for tank minimum 6mm. The job includes the loading, unloading, transportation and labors, including all lead, lifting at any height etc. as per direction of Engineer-in-charge. Each 2.0 715788.0 606600.0 1431576.0 1213200.0 |
| 20 | NDSR-3 Providing & fixing of of Aeration Tanks MBBR 1 & MBBR 2, Number : 2: Inclined at 60 Deg., Capacity- 10000Ltr, The job includes the loading, unloading, transportation and labors, including all lead, lifting at any height, loading, unloading, inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2MM FRP coating and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go to Clarified water tank. Make:-Jindal/Equivalent. Each 2.0 715788.0 606600.0 1431576.0 1213200.0 |
| 21 | NDSR-4 Providing & fixing of Air Blower, 2 Nos. The job includes of the loading unloading, transportation and labors, including all lead, lifting at any height, loading, unloading, . one Working + one standby, Type: Twin Lobe, Capacity: 75 cum/hr,driven through “V” belt or directly coupled through flexible coupling to a motors of suitable HP Suitable for 415 ± 10% volts, 3 phase, 100 cycles A/C supply with rotameter to areation MBBR 1 and MBBR 2 reactor tanks, with complete header pipe fittings,MS frame stand Make:-Aakash/Airvac/Everest/Equivalent Each 2.0 89473.5 75825.0 178947.0 151650.0 |
| 22 | NDSR-5 Provding And Fixing of Clarified Water Tank/Disinfection tank, Number : 2 One, Capacity: Suitable for 10000 Ltr M.O.C.- 6MM MS + FRP 2MM, , inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go to Media and Carbon filter. Make:-Jindal/Equivalent. Each 2.0 471227.1 399345.0 942454.2 798690.0 |
| 23 | NDSR-6 Providing & fixing of Dual Media Filter MS, Dia: 13\\", HOS:60\\",Media Type :Different Type Media, MOC- MS 6MM, , Media Qty- 300 kg,Dual Media Filter (DMF) consisting of MS/FRP pressure vessel with internal epoxy coating, graded filter media (anthracite + silica sand + pebble support), underdrain system, frontal piping with isolation valves, pressure gauges, sampling points and necessary accessories complete as per design and specifications. Each 1.0 208771.5 176925.0 208771.5 176925.0 |
| 24 | NDSR-7 Providing & fixing of Activeted Carbon Filter,MS, Dia: 13\\"mtr, HOS:60\\",, Moc: 6 MS MM, Media Type: Activated Carbon ID 900, Media Qty:200 Kg,Make: Jindal/Equivalent.Activated Carbon Filter (ACF) consisting of MS/FRP pressure vessel with internal epoxy coating, granular activated carbon (coconut shell based), pebble support layer, underdrain system, frontal piping with isolation valves, pressure gauges, sampling points and necessary accessories complete as per design and specifications. Each 1.0 268420.5 227475.0 268420.5 227475.0 |
| 25 | NDSR-8 Providing & fixing of Sewage Lifting Pumpscentrifugal Filter Feed Pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 02 (ONE working+ ONE standby), capacity- 4M3/hr at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 79333.76 67232.0 158667.52 134464.0 |
| 26 | NDSR-9 Providing & Fixing of centrifugal Filter Feed Pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 02(one working+ one standby), capacity- 4M3/hr at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 54281.18 46001.0 108562.36 92002.0 |
| 27 | NDSR-10 Providing & fixing of Sludge Recirculation Pump, Qty 02 (One workin + One stand by), capacity- 4M3/hr at 5-10 head ,MOC-CI/PP,Horizontal centrifugal non-clog sludge recirculation pump with CI head & base, bronze impeller, suitable motor, mechanical seal, pressure gauge with isolation cock, isolation valve, NRV on delivery line, suction strainer, and vibration pads complete with accessories suitable for 415±10% volts, 3-phase AC supply (1 working + 1 standby).Make:Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 80526.74 68243.0 161053.48 136486.0 |
| 28 | NDSR-11 Providing & fixing of Electrical Control Panel system incliding Electrical Panel for all the above including all switchgear ,cable,control wiring multi function multimeters etc.also including the complete automation of the plant with level controllers and sessors control cabing complete in all respects as reuired as per IS Specification. Electrical Control Panel including provision for cyclic operation of pumps - Pump working sequence should change after every operation. Control panel with programmable logic controller (PLC) with inbuilt PID controller, digital display with fluorescent screen, 3 ph, 415±10%V, AC variable speed drives (Nos. of VFD's same as that of pumps including standby) of suitable capacity rating wit having standard function of BI loop, energy saving catching a spinning load with speed search, auto hunting jog preset speeds, controlled stop on loss of supply power loss side through, DDC injection breaking fast stop. Drive should have selectable rated input frequency 50/60 Hz and output frequency range of 0.5-32 Hz, contactors, overload relays and MCBs should conform to IEC 898-1995 standards Ammeter, voltmeter. All trip indications should blink in case of trip and panels should only be accessible through an access code.Qty. 01, Make:-L&T/Schneider/Havells/Equivalent Components Based Each 1.0 316139.7 267915.0 316139.7 267915.0 |
| 29 | NDSR-12 Providing & fixingof AIR DIFFUERS for aeriation, Qty- 6,Make:-MM Aqua/ Equivalent .Bubble air diffusers of EPDM/Silicone membrane type (disc/tube) including SS/MS lateral pipes, air header, clamps, supports and accessories complete as per design and engineer’s direction. Each 6.0 6668.18 5651.0 40009.08 33906.0 |
| 30 | NDSR-13 Providing & fixing of Dosing Pump (Complete Set), Capacity- 0-6 LPH/hr Make:-Milton Roy/ Equivalent .Metering type chemical dosing pump with suitable motor, suction and discharge tubing, valvel pressure relief valve, and calibration column, including all accessories complete as per specifications (1 working + 1 standby). Each 4.0 20280.66 17187.0 81122.64 68748.0 |
| 31 | NDSR-14 Providing & fixing of Dosing tank of capacity 100 ltr. PVC ( Make : Sintex/Jindal/ Equivalent) .HDPE/FRP chemical dosing tank of suitable capacity (50/100 liters as required) with top cover, drain valve, level indicator, agitator (if required), and necessary fittings complete as per specifications. Each 4.0 2385.96 2022.0 9543.84 8088.0 |
| 32 | NDSR-15 Providing & fixing of Filter Press of Suitable Capacity Nos-1with CI frame, PP plates 15 nos complete with filter cloth complete with Filter press feed pump with complete pipe fitting and based on the MS mounted frame with all connection with screw pumps for making sludge cake Each 1.0 101403.3 85935.0 101403.3 85935.0 |
| 33 | NDSR-16 Providing & fixing of Screw Pump type Pumps for Sludge disposal system capacity -2 HP, The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 02 (ONE working+ ONE standby), at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 90070.58 76331.0 180141.16 152662.0 |
| 34 | NDSR-17 Providing & fixing on line turbine type Flow Meter with preamplifier & microprocessor based electronic flow meter mounted in plumbing plant room electrical control panel with the following features. Monitoring the total flow, Flow rate, high low arm batching and blending etc. Including electrical wiring from preamplifier to microprocessor based flow meter. Complete with all type of Plumbing & Electrical connections, accessories, wiring, conduits & supports complete with all respect. The signal from read out shall be 4-20 m.amps to be received on magnetic flow, type-Horizontal Online, size-1-2 inch, MOC- CI, Make: ABB/Equivalent. Each 2.0 69192.84 58638.0 138385.68 117276.0 |
| 35 | NDSR-18 Providing & fixing of and commissioning of Bio Deck Qty-two Cum(M3) Media, Moc- PVC Make:-MM Aqua/Equivalent.Bio Deck structure inside aeration tank, including MS/FRP supports, holding mesh, fasteners, anti-corrosive painting and arrangement for bio media loading, complete as per engineer’s direction. Cum 2.0 29824.5 25275.0 59649.0 50550.0 |
| 36 | NDSR-19 Providing & fixing of Feb media of uitable capacity as per manufacturer recommendation to be installed in FAB reactor Tank alongwith suitable sludge removal arrangement either by pumps or air lifting pumps.MOC-PVC Qty-02 Make-MM Aqua/Equivalent Lot 2.0 29824.5 25275.0 59649.0 50550.0 |
| 37 | NDSR-20 Providing & fixing of of Pipe & Fitting (UPVC), size- 2\\" and 1 1/2\\" ,interconnecting piping and isolation control valves for making the system complete. The piping material shall be MS 'C' class. UPVC piping (tested to min. 10 kg/cm2 pressure) : Pumped effluent (submerged) UPVC piping (tested to min. 10 kg/cm2 pressure) : Interconnecting pipe line after delivery header of pump / filter Make: Astral/Equivalent . Lot 1.0 106200.0 90000.0 106200.0 90000.0 |
| 38 | NDSR-21 Providing & fixing of ball valves and Butterfly Valve of required sizes as per approved scheme complete tested to a pressure not less than 15 Kg/Sq.cm.,Qty:-10 Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. Each 10.0 5428.0 4600.0 54280.0 46000.0 |
| 39 | NDSR-22 Providing & Fixing of Micron Filter with Housing, Make:-Pentier/Equivalent ., Suitable for 6M3 /Hr. Each 1.0 2325.78 1971.0 2325.78 1971.0 |
| 40 | NDSR-23 Providing & Fixing of Pressure Gauge, Qty.01, Make:-Guru/ Kranti/Equivalent . Capacity- Suitable for 6M3/hr Each 1.0 2446.14 2073.0 2446.14 2073.0 |
| 41 | NDSR-24 |
| 42 | NDSR-25 |
| 43 | NDSR-26 |
| 44 | NDSR-27 |
| 45 | NDSR-28 |
| 46 | NDSR-29 |
| 47 | NDSR-30 Total of SCH-A (NDSR ITEMS) 7621247.12 6458684.0 Total Of SCH-A (NDSR ITEMS) exclusive of GST@18% ( Rates of NDSR- items divided by 1.18) 6458684.0 Add GST @18% 1162563.12 Total of SCH-A (NDSR ITEMS) 7621247.12 6458684.0 SCHEDULE-B (NDSR ITEMS) ( WTP 10 KLH ) |
| 48 | NDSR-31 Supply and installation of MS Vessel 6 MS MM inner rubber line size of 1.8 mtr height/ 1 mtr dia. with 8mm disk with creation of MS Pipe line header/ footer, including all pipe fitting of vessel and removal of existing damage MS vessel complete job Make:-Jindal/Equivalent.External surface of Vessel shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats). Each 2.0 348100.0 295000.0 696200.0 590000.0 |
| 49 | NDSR-32 Supply and installation of Media different sizes of pebbles and gravels in new MS vessel of Water Treatment Plant Vessel including loading, unloading transportation, , and dismantle of rusted damage existing MS vessel from Sultanpur Depot. Kg 1500.0 17.7 15.0 26550.0 22500.0 |
| 50 | NDSR-33 Supply and installation of Carbon 900 ID for new MS vessel of water treatment plant including loading, unloading and transportation, and dismantle of rusted damage existing MS vessel from Sultanpur Depot Make:-Standard/Equivalent. Kg 850.0 153.4 130.0 130390.0 110500.0 |
| 51 | NDSR-34 Supply and installation of Resin for Softening plant, 220 NA Ma 1000 Kg for Sultanpur Depot job including loading, unloading and transportation Make:- Ion Exchange/Equivalent. Ltr. 1000.0 233.64 198.0 233640.0 198000.0 |
| 52 | NDSR-35 Supply and installation of Salt for Recharging the plant each recharge required 100 kg per day, job including loading, unloading and transportation for 365 days. Kg 31000.0 12.98 11.0 402380.0 341000.0 |
| 53 | NDSR-36 Supply and installation of Softening butterfly 2inch including loading, unloading and transportation complete job. Make: Jindal/Equivalent. Each 20.0 3245.0 2750.0 64900.0 55000.0 |
| 54 | NDSR-37 Supply and installation of MS Pipe 2 mtr 2inch including its tee, elbow, and union including loading, unloading and transportation complete job. Make: Jindal/Equivalent. Mtr 30.0 767.0 650.0 23010.0 19500.0 |
| 55 | NDSR-38 Supply and installation of Softening plant Multiport Valve 40NB (One Multiport Valve for Bharti Building and One Multiport Valve for SIT Building) Make:-Midas/Equivalent.. Each 2.0 5369.0 4550.0 10738.0 9100.0 |
| 56 | NDSR-39 Supply and installation of Strainer for media Carbon Vessels Make:- Midas/Equivalent. Each 2.0 5664.0 4800.0 11328.0 9600.0 |
| 57 | NDSR-40 Supply and installation of Feed Motors 2nos of new 2HP, Header 10-20 Mtr. Make:- Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 42008.0 35600.0 84016.0 71200.0 |
| 58 | NDSR-41 Supply and installation Agitator for salt mixing capacity:2hp suitable to 10KL/hr Plant Make: Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 46610.0 39500.0 93220.0 79000.0 |
| 59 | NDSR-42 Supply and installation PVC tank to salt mixing capacity:2000 lph (Make:--Sintex/Jindal/Equivalent.) Each 1.0 23600.0 20000.0 23600.0 20000.0 Total of SCH-B (NDSR ITEMS) 1799972.0 1525400.0 Total Of SCH-B (NDSR ITEMS) exclusive of GST@18% ( Rates of NDSR- items divided by 1.18) 1525400.0 Add GST @18% 274572.0 Total of SCH-B (NDSR ITEMS) 1799972.0 1525400.0 SCHEDULE-C (NDSR ITEMS) STP (95 KLD) |
| 60 | NDSR-43 Providing & fixing of of Collection Tank, Number : 2, Capacity-25000 Ltr, Type- Air Agitated tank , M.O.C.- MS, , inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the its flow will go the MBBR Tank. Make:-Jindal/Equivalent. Each 2.0 1711000.0 1450000.0 3422000.0 2900000.0 |
| 61 | NDSR-44 Supply, installation, testing & commissioning of 2 Nos Stainless Steel(SS304) / M.S Epoxy coated Perforated, Corrugated Bar Screen Chamber with suitable lifting arrangement of (size 300 mm wide x 300 mm high approx) Type-Effluent below bar screen,Capacity-10 cum, Dimension-0.6M X0.4MX0.6M(SWD).Solid Handing :50mm, MOC:SS,Equivalent, Make:-Jindal/Equivalent. Set 2.0 119298.0 101100.0 238596.0 202200.0 |
| 62 | NDSR-45 Providing & fixing of Oil & Grease Tank, Qty-2 , MOC- MS-6MM, Shell Thickness- FRP 6mm inner,Capacity- 7000 LTR . M.O.C.- MS, , inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats). Each 2.0 471227.1 399345.0 942454.2 798690.0 |
| 63 | NDSR-46 Providing & fixing of of Chemical Mixing Tank, Number : 2 -01, Type Air Agitated tank, MOC- MS, Capacity- 7000 Ltr., M.O.C.- MS, inlet/outlet/overflow/drain arrangements, baffle walls for chemical mixing inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats). Each 2.0 471227.1 399345.0 942454.2 798690.0 |
| 64 | NDSR-47 Providing & fixing of of Tube Settiler Tank Number : 2 : Suitable for 95 KLD STP plant, Capacity- 7000 Ltr. Type: Inclined at 60 Deg., M.O.C.- MS, , inlet/outlet/overflow/drain arrangements, with MS mess arrangememt so tube deck media can be arrganged with sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go the MBBR Tank. Make:-Jindal/Equivalent. Each 2.0 471227.1 399345.0 942454.2 798690.0 |
| 65 | NDSR-48 Providing & fixing of of Aeration Tank MBBR 1, Number : 2: One, Capacity-15000 Ltr, Type- Air Agitated tank M.O.C.- MS, , inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go the MBBR 2 Tank. Make:-Jindal/Equivalent. Each 2.0 823156.2 697590.0 1646312.4 1395180.0 |
| 66 | NDSR-49 Providing & fixing of of Aeration Tank MBBR2, Number :2, Capacity-15000 Ltr Ltr, Type : Air Agitated tank, M.O.C.- MS, , inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go the Tube settling Tank. Make:-Jindal/Equivalent. Each 2.0 823156.2 697590.0 1646312.4 1395180.0 |
| 67 | NDSR-50 Supply, installation, testing & commissioning of Sludge Holding Tank level indicators and controllers operation of the complete complete with auxillary NO/NC contacts. Capacity- 7000Ltr. , MOC- MS M.O.C.- MS, , inlet/outlet/overflow/drain arrangements, for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the Sludge pass to the filter pess . Make:-Jindal/Equivalent. Each 2.0 471227.1 399345.0 942454.2 798690.0 |
| 68 | NDSR-51 Providing & fixing of Filter Press of Suitable Capacity with CI frame, PP plates 20 nos complete with filter cloth complete with Filter press feed pump with complete pipe fitting and based on the MS mounted frame with all connection with screw pumps for making sludge cake Each 2.0 265500.0 225000.0 531000.0 450000.0 |
| 69 | NDSR-52 Providing & fixing of 4 Nos. twin type rotary air blowers (1W + 1S) capable of delivering 100 cum/hr of free air at 0.6 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a motors of suitable HP Suitable for 415 ± 10% volts, 3 phase, 100 cycles A/C supply with rotameter to areation MBBR 1 and MBBR 2 reactor tanks, with complete header pipe fittings,MS frame stand capacity: 100M3/hr Number : 2: One Working + one standby, Type: Twin Lobe, Make:-Aakash/Airvac/Everest/Equivalent Each 4.0 460200.0 390000.0 1840800.0 1560000.0 |
| 70 | NDSR-53 Providing & fixing of of Pipe & Fitting (UPVC), size- 2\\" and 1 1/2\\" ,interconnecting piping and isolation control valves for making the system complete. The piping material shall be MS 'C' class. UPVC piping (tested to min. 10 kg/cm2 pressure) : Pumped effluent (submerged) UPVC piping (tested to min. 10 kg/cm2 pressure) : Interconnecting pipe line after delivery header of pump / filter Make: Astral/Equivalent . Lot 2.0 295000.0 250000.0 590000.0 500000.0 |
| 71 | NDSR-54 Providing & fixing of and commissioning of Bio Deck Media, Moc- PVC Make:-MM Aqua/Equivalent.Bio Deck structure inside aeration tank, including MS/FRP supports, holding mesh, fasteners, anti-corrosive painting and arrangement for bio media loading, complete as per engineer’s direction. Cum 16.0 29824.5 25275.0 477192.0 404400.0 |
| 72 | NDSR-55 Providing & fixing of Feb media of suitable capacity as per manufacturer recommendation to be installed in FAB reactor Tank alongwith suitable sludge removal arrangement either by pumps or air lifting pumps.MOC-PVC Make-MM Aqua/Equivalent Lot 16.0 29824.5 25275.0 477192.0 404400.0 |
| 73 | NDSR-56 Providing & fixing on line turbine type Flow Meter with preamplifier & microprocessor based electronic flow meter mounted in plumbing plant room electrical control panel with the following features. Monitoring the total flow, Flow rate, high low arm batching and blending etc. Including electrical wiring from preamplifier to microprocessor based flow meter. Complete with all type of Plumbing & Electrical connections, accessories, wiring, conduits & supports complete with all respect. The signal from read out shall be 4-20 m.amps to be received on magnetic flow, type-Horizontal Online, size- 2 inch, MOC- CI, Make: ABB/Equivalent. Each 4.0 81122.64 68748.0 324490.56 274992.0 |
| 74 | NDSR-57 Providing & fixingof AIR DIFFUERS for aeriation, Qty- LOT, Capacity- Sutiable for 95 KLD STP Plant, Make:-MM Aqua/ Equivalent .Bubble air diffusers of EPDM/Silicone membrane type (disc/tube) including SS/MS lateral pipes, air header, clamps, supports and accessories complete as per design and engineer’s direction. Each 20.0 6668.18 5651.0 133363.6 113020.0 |
| 75 | NDSR-58 Providing & fixing of Dosing Pump (Complete Set), Capacity- Suitable for 95 KLD STP Plant, Make:-Milton Roy/ Equivalent .Metering type chemical dosing pump with suitable motor, suction and discharge tubing, NRV, foot valve, pressure relief valve, and calibration column, including all accessories complete as per specifications (1 working + 1 standby). Each 10.0 20280.66 17187.0 202806.6 171870.0 |
| 76 | NDSR-59 Providing & fixing of Dosing tank of capacity 100 ltr. PVC ( Make : Sintex/Jindal/ Equivalent) .HDPE/FRP chemical dosing tank of suitable capacity (50/100 liters as required) with top cover, drain valve, level indicator, agitator (if required), and necessary fittings complete as per specifications. Each 10.0 2108.66 1787.0 21086.6 17870.0 |
| 77 | NDSR-60 Providing & fixing of Sludge Recirculation Pump, Qty 02 (One working + One standby), capacity- 4M3/hr Horizontal centrifugal non-clog sludge recirculation pump with CI head & base, bronze impeller, suitable motor, mechanical seal, pressure gauge with isolation cock, isolation valve, NRV on delivery line, suction strainer, and vibration pads complete with accessories suitable for 415±10% volts, 3-phase AC supply (1 working + 1 standby).Make:Kirloskar/Crompton/Lubi/ Equivalent. Each 4.0 69577.52 58964.0 278310.08 235856.0 |
| 78 | NDSR-61 Provding And Fixing of Clarified Water Tank/Disinfection tank, Number : 2 One, Capacity: Suitable for 15000 Ltr M.O.C.- MS, , inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go to Media and Carbon filter. Make:-Jindal/Equivalent. Each 2.0 823156.2 697590.0 1646312.4 1395180.0 |
| 79 | NDSR-62 Providing & fixing of Dual Media Filter MS, Dia: 0.8mtr, HOS: 1.2mtr, Media Type :Different Type Media, MOC- MS 6mm, , Media Qty- 600kg,Dual Media Filter (DMF) consisting of MS/FRP pressure vessel with internal epoxy coating, graded filter media (anthracite + silica sand + pebble support), underdrain system, frontal piping with isolation valves, pressure gauges, sampling points and necessary accessories complete as per design and specifications. Each 2.0 334034.4 283080.0 668068.8 566160.0 |
| 80 | NDSR-63 Providing & fixing of Activeted Carbon Filter,MS, Dia: 0.8mtr, HOS: 1.2mtr,, Moc: MS6MM, Media Type: Activated Carbon ID 900, Media Qty: 500Kg,Make: Jindal/Equivalent.Activated Carbon Filter (ACF) consisting of MS/FRP pressure vessel with internal epoxy coating, granular activated carbon (coconut shell based), pebble support layer, underdrain system, frontal piping with isolation valves, pressure gauges, sampling points and necessary accessories complete as per design and specifications. Each 2.0 369823.8 313410.0 739647.6 626820.0 |
| 81 | NDSR-64 Providing & fixing of Sewage Lifting Pumps,Providing & Fixing of centrifugal Filter Feed Pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 04 (TWO working+ TWO standby), capacity- 4M3/hr at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 4.0 79336.12 67234.0 317344.48 268936.0 |
| 82 | NDSR-65 Providing & Fixing of centrifugal Filter Feed Pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 04 (TWO working+ TWO standby), capacity- 4M3/hr at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 4.0 55386.84 46938.0 221547.36 187752.0 |
| 83 | NDSR-66 Supply, Installation, Testing & Comissioing of Screw type Pumps for Sludge disposal system capacity -2 HP, The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 04 (TWO working+ TWO standby), capacity- 4M3/hr at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 4.0 100224.48 84936.0 400897.92 339744.0 |
| 84 | NDSR-67 Providing & fixing of Electrical Control Panel system incliding Electrical Panel for all the above including all switchgear ,cable,control wiring multi function multimeters etc.also including the complete automation of the plant with level controllers and sessors control cabing complete in all respects as reuired as per IS Specification. Electrical Control Panel including provision for cyclic operation of pumps - Pump working sequence should change after every operation. Control panel with programmable logic controller (PLC) with inbuilt PID controller, digital display with fluorescent screen, 3 ph, 415±10%V, AC variable speed drives (Nos. of VFD's same as that of pumps including standby) of suitable capacity rating wit having standard function of BI loop, energy saving catching a spinning load with speed search, auto hunting jog preset speeds, controlled stop on loss of supply power loss side through, DDC injection breaking fast stop. Drive should have selectable rated input frequency 50/60 Hz and output frequency range of 0.5-32 Hz, contactors, overload relays and MCBs should conform to IEC 898-1995 standards Ammeter, voltmeter. All trip indications should blink in case of trip and panels should only be accessible through an access code.Qty. 02, Make:-L&T/Schneider/Havells/Equivalent Components Based Each 2.0 351929.1 298245.0 703858.2 596490.0 |
| 85 | NDSR-68 Providing & Fixing of Micron Filter with Housing Suitable for 95 KLD STP Plant, Make:-Pentier/Equivalent ., Suitable for 4M3 /Hr. Each 2.0 112100.0 95000.0 224200.0 190000.0 |
| 86 | NDSR-69 Providing & Fixing of Pressure Gauge, Qty.02, Make:-Guru/ Kranti/Equivalent . Capacity- Suitable for 4M3 /Hr Each 2.0 3786.62 3209.0 7573.24 6418.0 |
| 87 | NDSR-70 |
| 88 | NDSR-71 |
| 89 | NDSR-72 |
| 90 | NDSR-73 |
| 91 | NDSR-74 |
| 92 | NDSR-75 |
| 93 | NDSR-76 Total of SCH-C (NDSR ITEMS) 24321251.4 20611230.0 Total Of SCH-C (NDSR ITEMS) exclusive of GST@18% ( Rates of NDSR- items divided by 1.18) 20611230.0 Add GST @18% 3710021.4 Total of SCH-C (NDSR ITEMS) 24321251.4 20611230.0 SCHEDULE-D (NDSR ITEMS) ETP (10 KLD) |
| 94 | NDSR-77 Providing & fixing of Bar Screen Chamber 1No. Stainless Steel (SS304) Perforated, Corrugated Bar Screen Chamber with suitable lifting arrangement of (size 300 mm wide x 300 mm high approx) Type-Effluent below bar screen,Capacity-10 cum, Dimension-0.3M X 0.3M X 0.3M(SWD). Solid objects of size 50 mm or above should be removed. MOC:SS,Equivalent, Make: Jindal/Equivalent. Each 1.0 53100.0 45000.0 53100.0 45000.0 |
| 95 | NDSR-78 Providing & fixing of COAGULATION ( PRIMARY REACTION CUM SETTLING TANK), & FLOCCULATION (SECONDARY REACTION CUM SETTLING TANK) Tanks, Inclined at 60 Deg., Moc:6MM The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2MM FRP coating and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go the MBBR 1&MBBR 2 Tank. Make:-Jindal/Equivalent, Capacity- 2000Ltr, The MS sheet thickness for tank minimum 6mm. The job includes the loading, unloading, transportation and labors, including all lead, lifting at any height etc. as per direction of Engineer-in-charge. Each 1.0 206500.0 175000.0 206500.0 175000.0 |
| 96 | NDSR-79 Providing & fixing of of Aeration Tanks MBBR 1 & MBBR 2, Number : 1: Inclined at 60 Deg., Capacity- 3000 Ltr, The job includes the loading, unloading, transportation and labors, including all lead, lifting at any height, loading, unloading, inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2MM FRP coating and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go to Clarified water tank. Make:-Jindal/Equivalent. Each 1.0 348100.0 295000.0 348100.0 295000.0 |
| 97 | NDSR-80 Providing & fixing of Air Blower, 2 Nos. The job includes of the loading unloading, transportation and labors, including all lead, lifting at any height, loading, unloading, . one Working + one standby, Type: Twin Lobe, Capacity: 10 cum/hr,driven through “V” belt or directly coupled through flexible coupling to a motors of suitable 1 HP Suitable for 415 ± 10% volts, 3 phase, 100 cycles A/C supply with rotameter to areation MBBR 1 and MBBR 2 reactor tanks, with complete header pipe fittings,MS frame stand Make:-Aakash/Airvac/Everest/Equivalent Each 2.0 46020.0 39000.0 92040.0 78000.0 |
| 98 | NDSR-81 Provding And Fixing of Clarified Water Tank/Disinfection tank, Number : 2 One, Capacity: Suitable for 2000 Ltr M.O.C.- 6MM MS + FRP 2MM, , inlet/outlet/overflow/drain arrangements, baffle walls for sewage inlet and outlet connection, finishing complete as per design and specifications The MS sheet thickness for tank minimum 6mm. The internal surfaces coated with 2mm FRP and External surface of tank shall be treated with 2 coat of Epoxy paint ( 1 Coat as primer +1 Main coat) corrosive enamel paint (Min. 2 coats).Tank will be constructed in such a way the over flow of this tank will go to Media and Carbon filter. Make:-Jindal/Equivalent. Each 2.0 206500.0 175000.0 413000.0 350000.0 |
| 99 | NDSR-82 Providing & fixing of Dual Media Filter MS, Dia: 12\\", HOS:48\\",Media Type :Different Type Media, MOC- MS 6MM, , Media Qty- 300 kg,Dual Media Filter (DMF) consisting of MS/FRP pressure vessel with internal epoxy coating, graded filter media (anthracite + silica sand + pebble support), underdrain system, frontal piping with isolation valves, pressure gauges, sampling points and necessary accessories complete as per design and specifications. Each 1.0 112100.0 95000.0 112100.0 95000.0 |
| 100 | NDSR-83 Providing & fixing of Activeted Carbon Filter,MS, Dia: 12\\"mtr, HOS:48\\",, Moc: 6 MS MM, Media Type: Activated Carbon ID 900, Media Qty:200 Kg,Make: Jindal/Equivalent.Activated Carbon Filter (ACF) consisting of MS/FRP pressure vessel with internal epoxy coating, granular activated carbon (coconut shell based), pebble support layer, underdrain system, frontal piping with isolation valves, pressure gauges, sampling points and necessary accessories complete as per design and specifications. Each 1.0 147500.0 125000.0 147500.0 125000.0 |
| 101 | NDSR-84 Providing & fixing of Sewage Lifting Pumpscentrifugal Filter Feed Pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 02 (ONE working+ ONE standby), capacity- 1m3/hr at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 44250.0 37500.0 88500.0 75000.0 |
| 102 | NDSR-85 Providing & Fixing of centrifugal Filter Feed Pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 02(one working+ one standby), capacity- 1 m3/hr. at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 33630.0 28500.0 67260.0 57000.0 |
| 103 | NDSR-86 Providing & fixing of Sludge Recirculation Pump, Qty 02 (One workin + One stand by), capacity- 1 m3/hr. at 5-10 head ,MOC-CI/PP,Horizontal centrifugal non-clog sludge recirculation pump with CI head & base, bronze impeller, suitable motor, mechanical seal, pressure gauge with isolation cock, isolation valve, NRV on delivery line, suction strainer, and vibration pads complete with accessories suitable for 415±10% volts, 3-phase AC supply (1 working + 1 standby).Make:Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 44250.0 37500.0 88500.0 75000.0 |
| 104 | NDSR-87 Providing & fixing of Electrical Control Panel system incliding Electrical Panel for all the above including all switchgear ,cable,control wiring multi function multimeters etc.also including the complete automation of the plant with level controllers and sessors control cabing complete in all respects as reuired as per IS Specification. Electrical Control Panel including provision for cyclic operation of pumps - Pump working sequence should change after every operation. Control panel with programmable logic controller (PLC) with inbuilt PID controller, digital display with fluorescent screen, 3 ph, 415±10%V, AC variable speed drives (Nos. of VFD's same as that of pumps including standby) of suitable capacity rating wit having standard function of BI loop, energy saving catching a spinning load with speed search, auto hunting jog preset speeds, controlled stop on loss of supply power loss side through, DDC injection breaking fast stop. Drive should have selectable rated input frequency 50/60 Hz and output frequency range of 0.5-32 Hz, contactors, overload relays and MCBs should conform to IEC 898-1995 standards Ammeter, voltmeter. All trip indications should blink in case of trip and panels should only be accessible through an access code.Qty. 01, Make:-L&T/Schneider/Havells/Equivalent Components Based. Each 1.0 64900.0 55000.0 64900.0 55000.0 |
| 105 | NDSR-88 Providing & fixingof AIR DIFFUERS for aeriation, Qty- 6,Make:-MM Aqua/ Equivalent .Bubble air diffusers of EPDM/Silicone membrane type (disc/tube) including SS/MS lateral pipes, air header, clamps, supports and accessories complete as per design and engineer’s direction. Each 3.0 6668.18 5651.0 20004.54 16953.0 |
| 106 | NDSR-89 Providing & fixing of Dosing Pump (Complete Set), Capacity- 0-6 LPH/hr Make:-Milton Roy/ Equivalent .Metering type chemical dosing pump with suitable motor, suction and discharge tubing, valvel pressure relief valve, and calibration column, including all accessories complete as per specifications (1 working + 1 standby). Each 2.0 20280.66 17187.0 40561.32 34374.0 |
| 107 | NDSR-90 Providing & fixing of Dosing tank of capacity 100 ltr. PVC ( Make : Sintex/Jindal/ Equivalent) .HDPE/FRP chemical dosing tank of suitable capacity (50/100 liters as required) with top cover, drain valve, level indicator, agitator (if required), and necessary fittings complete as per specifications. Each 2.0 2385.96 2022.0 4771.92 4044.0 |
| 108 | NDSR-91 Providing & fixing of Filter Press of Suitable Capacity Nos-1with CI frame, PP plates 05 nos complete with filter cloth complete with Filter press feed pump with complete pipe fitting and based on the MS mounted frame with all connection with screw pumps for making sludge cake Each 1.0 76700.0 65000.0 76700.0 65000.0 |
| 109 | NDSR-92 Providing & fixing of Screw Pump type Pumps for Sludge disposal system capacity -2 HP, The pump shall be suitable for 415±10% volts 3 phase AC supply. Qty-Nos- 02 (ONE working+ ONE standby), at 5-10 m head, type -positive displacement, M.O.C: C.I./ PP, filter feed Pumps of non-clog centrifugal type (horizontal/submersible) with CI casing, bronze impeller, mechanical seal, coupled with TEFC motor suitable for 415 ±10% volts, 3-phase AC supply including suction and delivery piping, isolation valves, pressure gauge, base frame, vibration pads, drain valve, level control system and necessary accessories complete as per specifications (1 working + 1 standby) Make : Kirloskar/Crompton/Lubi/ Equivalent. Each 2.0 90070.58 76331.0 180141.16 152662.0 |
| 110 | NDSR-93 Providing & fixing on line turbine type Flow Meter with preamplifier & microprocessor based electronic flow meter mounted in plumbing plant room electrical control panel with the following features. Monitoring the total flow, Flow rate, high low arm batching and blending etc. Including electrical wiring from preamplifier to microprocessor based flow meter. Complete with all type of Plumbing & Electrical connections, accessories, wiring, conduits & supports complete with all respect. The signal from read out shall be 4-20 m.amps to be received on magnetic flow, type-Horizontal Online, size-1-2 inch, MOC- CI, Make: ABB/Equivalent. Each 1.0 69192.84 58638.0 69192.84 58638.0 |
| 111 | NDSR-94 Providing & fixing of and commissioning of Bio Deck Qty-two Cum(M3) Media, Moc- PVC Make:-MM Aqua/Equivalent.Bio Deck structure inside aeration tank, including MS/FRP supports, holding mesh, fasteners, anti-corrosive painting and arrangement for bio media loading, complete as per engineer’s direction. Cum 1.0 29824.5 25275.0 29824.5 25275.0 |
| 112 | NDSR-95 Providing & fixing of Feb media of uitable capacity as per manufacturer recommendation to be installed in FAB reactor Tank alongwith suitable sludge removal arrangement either by pumps or air lifting pumps.MOC-PVC Qty-02 Make-MM Aqua/Equivalent Lot 1.0 29824.5 25275.0 29824.5 25275.0 |
| 113 | NDSR-96 Providing & fixing of of Pipe & Fitting (UPVC), size- 2\\" and 1 1/2\\" ,interconnecting piping and isolation control valves for making the system complete. The piping material shall be MS 'C' class. UPVC piping (tested to min. 10 kg/cm2 pressure) : Pumped effluent (submerged) UPVC piping (tested to min. 10 kg/cm2 pressure) : Interconnecting pipe line after delivery header of pump / filter Make: Astral/Equivalent . Lot 1.0 53100.0 45000.0 53100.0 45000.0 |
| 114 | NDSR-97 Providing & Fixing of Micron Filter with Housing, Make:-Pentier/Equivalent ., Suitable for 1M3 /Hr. Each 1.0 2325.78 1971.0 2325.78 1971.0 |
| 115 | NDSR-98 |
| 116 | NDSR-99 |
| 117 | NDSR-100 |
| 118 | NDSR-101 |
| 119 | NDSR-102 |
| 120 | NDSR-103 |
| 121 | NDSR-104 Total of SCH-D (NDSR ITEMS) 2821685.62 2391259.0 Total Of SCH-D (NDSR ITEMS) exclusive of GST@18% ( Rates of NDSR- items divided by 1.18) 2391259.0 Add GST @18% 430426.62 Total of SCH-D (NDSR ITEMS) 2821685.62 2391259.0 Schedule-E (DSR-2023 Items) |
| 122 | Any DSR-2023 TOTAL of DSR 2023 Schedule-E exclusive of GST@18% ( Rates of DSR 2023- items divided by 1.18) 1694915.25 Add GST @18% 305084.75 Total Of DSR 2023-Items Schedule-E 2000000.0 Grand total of Schedule-E (DSR-2023 Civil) after CPWD indexation @0.973 1946000.0 1649152.54 Total of SCH-A (NDSR ITEMS) (ETP 72 KLD) + SCH-B (NDSR ITEMS) ( WTP 10 KLH ) + SCH-C (NDSR ITEMS) (STP 95 KLD) + SCH-D (NDSR ITEMS) (ETP 10 KLD) + SCH-E (DSR-2023 ITEMS) 38510156.14 32635725.54 |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
