|
| 1 | Item Code [ PWD BSR 2025 2.2]:Item Type [road] :: Sub Item Code [ PWD BSR 2025 2.2 + 2.2 (II)]: Clearing and grubbing road land including up rooting wild vegetation, grass, shes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used orauctioned, upto alead of 1000 m including removal and disposal of toporganic soilnot exceeding 150mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means In area of non-thorny jungle |
| 2 | Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock ]:Item Type [road] :: Sub Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock + 3.9.2-B]: Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections as per MoRTH Specification Clause 301.3. Mechanical Means |
| 3 | Item Code [2025 12.7]:Item Type [road] :: Supplying, fitting and placing TMT bar reinforcement (Fe 415) in sub structrue complete as per drawings and MoRTH specification Clauses 1009,1600 & 2202 |
| 4 | Item Code [2025 16.14.1]:Item Type [road] :: Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average out put of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @ 4.0 & 4.5 percent by weight of total mix and filler, transporting the hot mix toworksite, laying with ahydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers toachieve the desired compaction as per MoRTH Specifications Clause 505 complete in all respects. Bitumen (VG-30) Grading - I (37.50mm (Nominal Size) |
| 5 | Item Code [2025 16.52]:Item Type [road] :: Suppy of Swiss Type Bollard made out of 1.25mm thick M.S. sheet, total height 135cm, the lower portion is made in tapered circular section having up per dia15cm and lower dia 20cm with attachment of one mandatory plate 7mm thick Mfixed with the help of 7cm long, 30mm dia crome plated M.S. tube this part is fixed on the body with another attachment of a cap 30x7cm. whole body is processed in black stoving enamel and mandatory plate in Azureblue ,with one compulsory keep left arrow with 10mm border reflective strip each of 7.5cm on body complete in all respect. |
| 6 | Item Code [2025 16.53]:Item Type [road] :: Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective back ground with additional border of 1.25 cm all arount it. |
| 7 | Item Code [2025 2.3.9]:Item Type [road] :: Providing and laying Cement concrete forplain/reinforced concrete inopen foundationas per drawing and technical specification as per MoRTH Specification :Section1500, 1700&2100 including form work at any level. R.C.C. grade M30 raft |
| 8 | Item Code [2025 3.3]:Item Type [road] :: Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification Clause 305.3 |
| 9 | Item Code [2025 3.3.21]:Item Type [road] :: Structural Cement concrete for plain concrete/reinforced concrete for substructure at any level, complete as per drawing and technical specification. Using Batching Plant, Transit Mixture, and Concrete Pump. Design mix concrete-[ MoRTHS pecification : Clause 1500&1700] R.C.C including formwork R.C.C. grade M30 up to 5 metre height |
| 10 | Item Code [2025 3.5(iii) ]:Item Type [road] :: Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 |
| 11 | Item Code [2025 3.8 (iii)]:Item Type [road] :: Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per MoRTH Specification Clause 301.3.5 |
| 12 | Item Code [2025 4.9 A i]:Item Type [road] :: Providing crushed run stone aggregate greading conforming to table 400-14 depositing on aprepared surface by hauling vehicles ,spreading and mixing with a motor grader, watering and compacting with a three wheel 80-100 kN static roller as per MoRTH Specification Clause 407 to form a layer of sub-base/base By mix-in-place method With 53 mm maximum size of aggregates |
| 13 | Item Code [2025 5.1]:Item Type [road] ::Prime Coat Sub Item Code [2025 5.1 + (i)]: Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 14 | Item Code [2025 5.2 i]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 15 | Item Code [2025 6.3 IV B]:Item Type [road] :: Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 100mm as per drawings and as per IS15658:2006. and all materials shall conform to MoRTHS pecification Clause 602.with M-30 Grade 0.30Mtr x0.30Mtr x 0.15Mtr Edge Blocks. Category B Dentated only two side like I,Z,T shape as per IRC SP 63-2004 |
| 16 | Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] ::Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104Sub Item Code [2025 UNIFIED BSR 11.4 + II (i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 15 Nominal mix (1:2.5:5) cross widening |
| 17 | Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] ::Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104Sub Item Code [2025 UNIFIED BSR 11.4 + II (i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 15 Nominal mix (1:2.5:5) interlocking tile |
| 18 | Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] ::Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104Sub Item Code [2025 UNIFIED BSR 11.4 + II (i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 15 Nominal mix (1:2.5:5) wing wall |
| 19 | Item Code [2025 UNIFIED BSR 3.4 (i)]:Item Type [road] :: Construction of embankment with approved materials obtained from borrow pits with a lift 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 50 m as per MoRTH Specification Clause 305.3 |
| 20 | Item Code [Building BSR 2025 11.1 (i) ]:Item Type [building] :: Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Upto 3 m depth box widening |
| 21 | Item Code [PWD BSR 2025 16.15]:Item Type [road] :: Sub Item Code [PWD BSR 2025 16.15 + 16.15.2]: Providing and laying bituminous concretewith 100-120 TPH batch type hotmix plant producing an average output of 75 tonne sper hourusing crushed aggregates of specified grading, premixed with bituminous binder minimum @ 5.2 & 5.4 percent of mix and filler, transporting the hot mix to work site, laying with ahydrostatic paver finisher with sensor control to therequired grade, level and alignment, rolling with smooth wheeled, vibratory and tande mrollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects for Grading-I ( 19 mm nominal size ) Bitumen (VG-30 |
| 22 | Item Code [road 2025 10.19]:Item Type [road] :: Providing and fixing of road stud 100 x100 mm die cast in aluminium ,resistant to corrosive effect of salt and grit ,fitted with lense reflectors,installed in concrete or asphaltic surface by drilling holes 30mm up to a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar ,all as per BS:873 (Part 4) 1973.as per MoRTH Specification Clause 804. |
| 23 | Item Code [road 2025 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\\"C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 24 | Item Code [road 2025 3.14]:Item Type [road] :: Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads ,transporting to site,spreading ,grading to required slope and compacted to meet requirement of Table300-2 with lead upto 50 m as per MoRTH Specification Clause 305.3 |
| 25 | Item Code [road 2025 5.2 ii]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 26 | Item Code [Road BSR 2025 4.6]:Item Type [road] :: Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH SpecificationClause 406 By Mechanical Means with all lead Please Enable Macros to View BoQ information |
