|
| 1 | Earth work in excavation in foundation, trenches etc. includingdressing of sides and ramming of bottoms, including getting out theexcavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. LONG WALL(ROOM) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation |
| 3 | Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) Long Wall |
| 4 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 6 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Cold twisted bars |
| 7 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : |
| 8 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand) |
| 9 | Precast terrazo tiles 22mm thick with graded marble chips of sizeupto 12mm laid in floors, and landings, jointed with neat cementslurry mixed with pigment to match the shade of the tiles includingrubbing and polishing complete with precast tiles on 20mm thick bedof cement mortar 1:4 (1 cement :4 coarse sand) : in errace |
| 10 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Qty of plaster |
| 12 | New work (two or more coats) over and including priming coat withcement primer. |
| 13 | Providing and fixing 1st quality MAT finished ceramic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 14 | Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specificationsTwo or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. |
| 15 | Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. |
| 16 | Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter |
| 17 | Providing corrugated G.S. sheet roofing including vertical/ curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8 mmdiameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coat of approved steelprimer and two coats of approved paint on overlapping of sheetscomplete upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275gm/m² |
| 18 | Steel work in built up tubular trusses including cutting, hoisting fixingin position and applying a priming coat of approved steel primer,welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes |
| 19 | Earth work in excavation in foundation, trenches etc. includingdressing of sides and ramming of bottoms, including getting out theexcavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 21 | Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 23 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Cold twisted bars |
| 24 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : |
| 25 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 26 | Random rubble dry stone Kharanja (soling) under floor. |
| 27 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand) |
| 28 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Toilet Floor |
| 29 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A'Decorative teak veneer One sideM.S DOOR |
| 30 | tructuralsteelworkriveted,boltedorweldedinbuiltupsections,trussesandframedwork,includingcutting,hoisting,fixinginpositionandapplyingapriming coat of approved steel primer all complete:M.S DOOR FRAME |
| 31 | Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter RAIN WATER PIPE |
| 32 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 33 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm |
| 34 | ProvidingandfixingdrainingboardwithC.I.bracketsincludingpaintingofbrackets,cuttingandmakinggoodthewallswhereverrequired:OrissapatternW.C. pan of size 580x440 mm |
| 35 | ProvidingandfixingwashbasinwithC.I.brackets,15mmC.P.brasspillartaps,32mmC.P.brasswasteofstandardpattern,includingpaintingoffittingsandbrackets,cuttingandmakinggoodthewallswhereverrequire:WhiteVitreousChina Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including allCPVC plain & brass threaded fittings i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete as perdirection of Engineer in Charge. |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including allCPVC plain & brass threaded fittings i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete as perdirection of Engineer in Charge. |
| 38 | ProvidingandfixingC.P.brass bib cockofapprovedqualityconformingtoIS:8931 15 mm nominal bore |
| 39 | Providingandfixingballvalve(brass)ofapprovedquality,Highorlowpressure,with plastic floats complete : 25 mm nominal bore |
| 40 | Providingandplacingonterrace(atallfloorlevels)polyethylenewaterstoragetankISI:12701markedwithcoverandsuitablelockingarrangementandmakingnecessaryholesforinlet,outletandoverflowpipesbutwithoutfittingsandthebasesupport for tank(500 lit X 2 Nos ) |
| 41 | ProvidingandfixingonwallfaceUnplasticised-PVCmouldedfittings/accessoriesforUnplasticisedRigidPVCrainwaterpipesconformingtoIS:13592TypeAincludingjointingwithsealringconformingtoIS:5382leaving10mmgap for thermal expansion Coupler 110 mm |
| 42 | ProvidingandfixingonwallfaceUnplasticised-PVCmouldedfittings/accessoriesforUnplasticisedRigidPVCrainwaterpipesconformingtoIS:13592TypeAincludingjointingwithsealringconformingtoIS:5382leaving10mmgap for thermal expansion Single tee with door 110 mm |
| 43 | ProvidingandfixingonwallfaceUnplasticised-PVCmouldedfittings/accessoriesforUnplasticisedRigidPVCrainwaterpipesconformingtoIS:13592TypeAincludingjointingwithsealringconformingtoIS:5382leaving10mmgap for thermal expansion Bend 87.5° 110 mm bend |
| 44 | ProvidingandfixingonwallfaceUnplasticised-PVCmouldedfittings/accessoriesforUnplasticisedRigidPVCrainwaterpipesconformingtoIS:13592TypeAincludingjointingwithsealringconformingtoIS:5382leaving10mmgap for thermal expansion Shoe (Plain) 110 mm Shoe |
| 45 | ProvidingandfixingonwallfaceUnplasticised-PVCmouldedfittings/accessoriesforUnplasticisedRigidPVCrainwaterpipesconformingtoIS:13592TypeAincludingjointingwithsealringconformingtoIS:5382leaving10mmgap for thermal expansion Single push fit Coupler : 110mm |
| 46 | ProvidingandfixingPTMTBallcockofapprovedquality,colourandmakecompletewithEpoxycoatedaluminiumrodwithL.P./H.P.H.D.plasticball.25mm nominal bore, 152mm long. Weighing not less than 440 gms |
| 47 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standardmake and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required : |
| 48 | Providing and fixing C.P. brass angle valve for basin mixer andgeyser points of approved quality conforming to IS:8931 |
| 49 | Makingsoakpit2.5mdiameter3.0metredeepwith45x45cmdrybrickhoneycombshaftwithbricksofclassdesignation75andS.W.drainpipe100 mm diameter, 1.8 m long complete as per standard design.With bricks Please Enable Macros to View BoQ information |
