|
| 1 | Sub Estimate No 1 :- Pumping Machinary |
| 2 | Item No 1 :- Providing erecting giving testof submersible pump set conforming to IS 8034 and moter coforming to IS 9283 with water proof winding, pump shall be sutaible for verious delivery head and discharge with stainless steel shaft, moter sutaible for working on 415v + 10% 3oh 50Hz A.C. supply, with cable guard, thrust carben/ fiber bearing to stand entire hydrolic thrust, The pump set shall be sutaible for direct coupling with sutaible suction stiner pump should have sutaible discharge out let as per manufacture design. Antithrust stream lined non return valve shall be provide with the pump. 3m submersible copper coundctor cable in single/ double run and 2 pairs of sutaible size clamp 10mm thck shall be provided with each pmp. |
| 3 | 5 bhp |
| 4 | Item No 2 :- Providing and erecting commissioning & testing of floor mounting type L.T. panel board (skeleton type) box type as per detailed specification ...etc complete. |
| 5 | 5 bhp |
| 6 | Item No 3 :-Providing double flanged sluice valve confirming for IS2906/14846 including worn gear arrangement as per test pressure stanless steel spindal, cap including all taxes transportation etc. |
| 7 | Item No 4 :- Providing and supplying ISI mark CI D/F reflux valve (non return valves) of following dia including all taxes (local and central), railway fright, octroi, inspection charges,un loding from raiway wagon, loading in to truck, transport up to departmental store/ site, unloding, stacking etc. complate.Reflux valve as per IS-5312 part-I (1984) |
| 8 | Item No 5 :-lowering laying and jointing in position following C.I.D/FReflux valve,Butterfly valve and Sluice valve including cost of all labour jointing material including nut bolts and giving satisfactory hydraulic testing etc. complete.(rate for all class of valve) |
| 9 | Item No.6:- Providing erecting jointing testing of various drop pipe 50 mm dia G.I. heavy class in 1.5 M/1 M length or any other length as per site condition with heavy duty flanges . ... etc complete as per detailed specification. |
| 10 | Sub Estimate No 2 :- Distribution System |
| 11 | Item No.1 :- Excavation for foundation / pipe trenches in earth soil of all type sand gravel and soft murum including removing excavated material up to distance of 50 m. and lift as bellow stacking spreading as directed normal dewatering preparing the bed for foundation excluding back filling ...etc complete |
| 12 | Item No 2 :-Excavation for foundation / pipe trenches in hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 m.from the area and lift as bellow, normal dewatering excluding back filling ...etc complete. |
| 13 | Item No 3 :- Providing & supplying in standard length HDPE pipes confirming ti IS 4984 /14151/12786/13488 with necessary jointing material like mechanical connector in all respect in cluding inspection charges transportation to store etc complete |
| 14 | 75mm 6Kg |
| 15 | 63mm 6Kg |
| 16 | Item No 4 :- Lowering, Laying and Jointing HDPE pipes following class & diameter including conveyance from store to site of work all labour etc complete either underground or in vertical position as directed by Engineer in charge |
| 17 | 75mm 6Kg |
| 18 | 63mm 6Kg |
| 19 | Item No 5 :- Hydraulic testing of HDPE pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, Therates under this item shall also include cost of retesting if necessary and reinstating to original postion. |
| 20 | 75mm6kg |
| 21 | 63mm 6kg |
| 22 | Item No 6 :- Providing double flanged sluice valve confirming for IS2906/14846 including worn gear arrangement as per test pressure stanless steel spindal, cap including all taxes transportation etc. complete. |
| 23 | Item No 7 :- lowering laying and jointing in position following C.I.D/FReflux valve,Butterfly valve and Sluice valve including cost of all labour jointing material including nut bolts and giving satisfactory hydraulic testing etc. complete.(rate for all class of valve) |
| 24 | Item No 8 :- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line and then hard material in 15 cm thick layer with all lead and lift including consolidation srcharging etc. complate. |
| 25 | Item No 9 :- Providingand supplying Air valves as per IS14845-2000 and MJP standard specifications of approved make and quality of following diameters including all taxes(central and local) railway freight, inspection charges, unloading from railway freight loading into truck transportation up to departmental store/site unloading and stacking etc.complate. |
| 26 | 20 MM Dia Air valve single ball Pn 1.0 |
| 27 | Item No 10 :- Lowering laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in charge including cost of conveyance from store to site of work cost of all material and giving satisfactory hydraulic testing etc.complete. (for all class of valve.) |
| 28 | 20 MM Dia Air valve single ball |
| 29 | Item No 11 :- Providing & Fixing Name Board...etc |
| 30 | Sub Estimate No 3 :- RCC Well Structure |
| 31 | Item No 1 :- Providing structural steel work in single stanchions composed of RSJ, channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineerincharge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd- C-6/277) |
| 32 | Item No 2 :- Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete. |
| 33 | Total |
| 34 | GST Please Enable Macros to View BoQ information |
