|
| 1 | Earth work in excavation for foundation of structure by mechanical means as per drawings and clause 304 of MORT&H specifications (2001)(placing for well curb) SOR Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 2 | Providing and constructing temporary iceland 34 m diameter for Construction of well foundtation for 8 m dia well (Assuming depth of water 4.0 m and height of island 4.5 m.) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 3 | Providing and laying of cutting edge of mild steel weighing 150 kg per meter of well foundation as per drawings and clause 1200 & 1900 of MORT&H Specifications (2001) . Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 4 | RCC work in M-30 in well curb with cement, aproved coarse sand & 2cm. Gauge well graded grit including nece-sarry shuttring, placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work.Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 5 | RCC work in M-30 in well steining with cement aproved coarse sand & 2cm. Gauge well graded grit including nece-sarry shuttring, placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 6 | Sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil,clayey soil and rock as shown against each case ,cpmplete as per drawings and clause 1200 of MORT&H specification (2001).Depth of sinking reckoned from bed level, Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 7 | depth below bed level up to 3.0M Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 8 | depth below 3.00 to 10 M Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 9 | Beyond 10.00 M Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 10 | M 25 grade plain cement concrete with 10 per cent extra cement in well foundation as per drawings and clause 1200,1500 & 1700 of MORT&H Specifications (2001) in bottom plug. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 11 | M 25 grade plain cement concrete in well foundation as per drawings and clause 1200,1500 & 1700 of MORT&H Specifications (2001) in intermediate plug. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 12 | Sand filling in wells complete as per drawing and clause 1207 of MORT&H Specifications (2001) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 13 | M30 grade Reinforced cement concrete in well foundation as per drawings and clause 1200,1500 & 1700 of MORT&H Specifications (2001) in well cap. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 14 | M 30 grade Reinforced cement concrete in substructure as per drawing as clause 1200 ,1500 & 1700 of MORTH Specifications (2001) in piers Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 15 | RCC M-35 in superstructure with cement approved coarse sand & 2cm gauge well graded grit including nece-sary shuttring placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all material labours T&P etc required for porper completion of wortk. as per drawings and clause 1500 &1600 1700 of MORT&H specifications (2001) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 16 | Providing and laying cement concrete wearing coat M-30 Grade including reinforcement complete as per drawing and technical specification. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 17 | HYSD steel or iron work in well steining well cats, abutment and their caps, slabs, curvs etc, brought to required shape including cutting, bending & also including cost of cecessary reinfocement for proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 18 | M 15 ordinary grade plain cement concrete leveling course below approach slabs per drawings and clause 1500, 1600, 1700 & 2700 and MORT&H Specifications (2001) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 19 | PVC pipes (working pressure 4 kg / cm 2 ) Single socketed pipe 110 mm dia Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 20 | Back filling behind abutment, wing wall and return wall with 40mm Stone ballast. complete as per drawing and technical specifications Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 21 | Supply, fitting and fixing in positions true to line and level sixe elastomeric bearing comforming to IRC 83 (part II) section ix compelete with all accessories including all labour material T & P and testing charges required for the porper compeletion of the work as per drawing and Morth specifications (2001) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 22 | Providing and laying of a strip seal expansions joint catering to maximum horizontal movement up to 70mm compelete as per approved drawing and standard specification to be installed by the manufacturer/s supplier or their aurthorized representative ensuring compliance to the manufacturer,s instructions for installation Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 23 | Drainage Spouts complete as per drawing and Technical specification Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 24 | Providing and laying filter material undermeath pitching in slopes complete as per drawing and technical specification. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 25 | Providing and laying pitching on slopes laid over prepared filter media including boulder pron laid dry in front of toe of embankment complete as per drawing and technical specification Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 26 | Construction of KC Drain Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 27 | Construction of Chute drain Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 28 | Construction of Embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 29 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader/tractor mounted appropriate equipment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specificatin Clause 401. (i) For Grading I Material Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 30 | Providing, laying, spreading and compacting stone aggregate of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to required density Grading 2 as per Technical Specification Clause 405. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 31 | Providing, laying, spreading and compacting stone aggregate of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to required density Grading 3 as per Technical Specification Clause 405. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 32 | Brick edging on both sides of the road of first class bricks 8 cm (3\\") wide and 12 cm. 4½\\"deep laid with mud mortar including labour and supply of. bricks finished to required template and proper alignment and also including dressing and ramming the excavated earth as directed by Engineer-in-Charge. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 33 | Providing and applying primer coat of Low Porosity with Bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70 Kg/Sqm using mechanical means as per Technical Specification Clause 502. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 34 | Providing and applying tack coat with Bitumin VG-10 using emulsion pressure distributer at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clauses 503. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 35 | Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates using 80/100 Grade bitumen bitumen to required line grade and level to serve as wearing course on a previously prepared base by manual means, including mixing in a suitable plants, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 36 | Providing and laying seal coat by manual means with VG-10 Bitumen sealing the voids in a bitumenous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specifications Clause 510 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 37 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 38 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 39 | PCC 1:3:6 nominal mix in foundation 4 cm gauge .....as per Mord specification Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 40 | Brick Masonry Work in Cement Mortar 1:3 in Foundation... Mord specification. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 41 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row.....as per Mord specification. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 42 | Brick Masonry Work in Cement Mortar 1:3 in substructure.. Mord specification. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 43 | Pointing with cement mortar (1:3) on brick work in substructure.. Mord specification. Including all T&P, Labour, Material, Royalty Tax but excluding GST Please Enable Macros to View BoQ information |
