|
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking or materials as directed by the Engineer-in-charge with in a distance of 60 meter S no 692 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 2 | Dismantling jack arched or wooden beam and barga roof including beam roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 meter S no 695 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 3 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 4 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 5 | Brick masonry work in 1:3 cement mortar in foundation & sub-structure complete excluding pointing and plastering as per drawing and technical specifications Clauses Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 6 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 7 | RCC Grade M-20 in open foundation Structure complete as per Drawing and Technical Specifications. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 8 | RCC Grade M-25 for wall & slab etc. Structure complete as per Drawing and Technical Specifications. Spec. 1500, 1700 & 2100) (Sr No. 15.12B) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 9 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation &Sub Structure complete as per Drawing and Technical Specifications. (Morth Spec. 1600& 2200) (Sr No. 15.13) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 10 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 11 | Construction of RCC railing of M30 Grade insitu with 20mm nominal size aggregate true to line and grade tolerance of vertical RCC Post not to exceed 1 in 500 centre to centre spacing between vertical post not to exceed 2000mm leaving adequate space between vertical post for expansion complete as per approved drawings and technical specification. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 12 | Providing and laying of filter material with granular material/ stone aggregate satisfying the requirement laid down clause 2504.2.2 as per MORTH Specifications Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 13 | providing and laying boulder apron for bed protection with stone boulder of minimum size and weight as per table No1300.1 No gragment weighing not less than 25 kg lag dry complets as per drawing and technical specification clause 1301filter material underneath piching slopes complete as per drawing and technical specification clause 2702 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 14 | Providing weepholes in RCC abutment wing wall Raft with 100 mm dia P.V.C. down Pipe.extending through the full wirth the strutures with slopes of 1V :20H towards technical specification 614 702 1204 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 15 | De-Watering by diesel pumping set of 10 H.P.copacity during the construction of bridge& culvert etc including hite-charges of pumping set and its POL, labour all T&P etc complets in all respect Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 16 | Providing and erecting Type-A \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MORT&H Specification Clause 810 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 17 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 18 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 19 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405 (By Manual Means) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 20 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (By Manual Means) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 21 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70 Kg/Sqm using mechanical means as per Technical Specification Clause 5.1-502. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 22 | Providing and applying tack coat with Bitumen (VG-10) using emulsion distributor at the rate of 0.25 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 5.2-503(iii) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 23 | Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates using VG-10 Grade bitumen bitumen to required line grade and level to serve as wearing course on a previously prepared base by manual means, including mixing in a suitable plants, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 24 | Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bitumenous surface laid to the specified levels, grade and cross fal.l using Type C as per Technical Specifications Clause 510 Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 25 | Brick edging on both sides of the road of first class bricks 8 cm (3\\") wide and 12 cm. 4½\\"deep laid with mud mortar including labour and supply of. bricks finished to required template and proper alignment and also including dressing and ramming the excavated earth as directed by Engineer-in-Charge. SOR . Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 26 | Constructions of 1x1000 mm dia Hume Pipe Culvert NP-3 class. Complete as per Engineer In Charge. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 27 | Brick soling with straight over burnt laidon edge and dry including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth, spreading blinding coat of 1 cm (3/8\\") depth of local earth of P.I. 5 to 7 as per S.I.No 762 (b) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 28 | For sign board & Inogaration Board Including all T&P, Labour, Material, Royalty Tax but excluding GST Please Enable Macros to View BoQ information |
