|
| 1 | Surface dressing of the ground including removing vegetation and in equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m (All kind of soil) DSR-18/2.28.1 |
| 2 | Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms.measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the removal of rubbish upto area cleared. SOR/259(i) Same as above but grass only SOR-20/259(a)/4.06 |
| 3 | Tractor with trolley including POL driver (AR/GNIDA) SOR-20/SL.NO.19/ Chapter 2 |
| 4 | Supply of labour SOR-20/SI.NO.12/Chapter 2 |
| 5 | M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-2020, item-305(a) |
| 6 | 12 mm cement plaster of mix |
| 7 | 1:6 (1 cement: 6 coarse sand) DSR-18/13.4.2 |
| 8 | Excavation in foundation in ordinary soil (loam,clay or sand) including lift up to 1.50 m. and lead up to 30m. and including filling watering and ramming of excavated earth into the trenches or into the space of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m. from the foundation trenches ( where machine con not rech/move).SOR-251a |
| 9 | Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. (DSR-2018/2.24.1/A.R.) |
| 10 | CARTAGE OF Earth of fly ash when added to schedule item no. 253 |
| 11 | 1st km. (if lead is beyond 1/2 km.) KM. (SOR-20/261b) |
| 12 | Tractor with water tanker with cost water including POL SOR-20/SI.NO.27/Chapter 2 |
| 13 | Providing JCB with driver and including POL (AR/GNIDA) (SOR-20/S/NO. 31/Chapter 2) |
| 14 | Supply of dewatering pump 10 H.P (MORTH/P.NO.746/S.NO 109) |
| 15 | Hydraulic excavator of 0.9 Cum bucket including P.L.O and driver (MORTH/ch.20/SI.NO.9/pg-741) |
| 16 | Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SOR-20/281 |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 18 | Thermo-Mechanically Treated bars of grade Fe-500D or more. (Sail Steel) (DSR-2018/5.22.6) |
| 19 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. /9.06/E/case-II) |
| 20 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 21 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Sail Steel) (DSR-2018/10.25.2/AR) |
| 22 | Hiring of portable Re-cycle jetting calus section machinenmounted on mahindra volero maxi with hydraqulically operate mahindra de-silter upto depth of 15 water with driver for the area to gr.noida as direated by engineer in-chare for 8.50 hours per day overfine will be paid on pro rate basic processure 3000 PSI liters, rate as per noida (GNIDA) |
| 23 | Cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/279(a)) |
| 24 | Plain Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M25 using batching plant transit mixer & manual placing . MORTH-9.06 D/Case-II |
| 25 | Providing and laying I shaped interlocking tiles Rubber Moulded 80mm thick precast cement concrete having plan dimension 200 x (160+120mm) with compressive strength not be less than 40Mpa (M-40 and weight 5Kg, laid in required pattern over and including average 50mm thick compacted bed fine sand and filling the joints with fine sand all complete as per direction of Engineer-in-Charge with conforming to ISI-15658-2006 (SOR/A.R) Grey colour. |
| 26 | Providing and fixing SFRC cover on chamber (without frame) 50mm thick size 600x600mm (AR/GNIDA) |
| 27 | Size 600x600mm (Heavy duty) |
| 28 | Providing and fixing SFRC cover on chamber (with frame) 50mm thick.(AR/GNIDA) |
| 29 | Size: 600x600mm (Heavy duty) |
| 30 | Labour Cess and GST will be paid extra as per govt.orders Please Enable Macros to View BoQ information |
