|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil : |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil : |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like |
| 5 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).i. Depth not exceeding 1.5 m. |
| 6 | ii. Depth exceeding 1.5 m but not exceeding 3 m |
| 7 | iii. Depth exceeding 3 m but not exceeding 4.50 m |
| 8 | Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered):i. Depth not exceeding 1.5 m. |
| 9 | ii. Depth exceeding 1.5 m but not exceeding 3 m |
| 10 | iii. Depth exceeding 3 m but not exceeding 4.50 m |
| 11 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: i. Water bound macadam road. |
| 12 | ii. Bituminous road. |
| 13 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : i. 15 mm to 40 mm nominal bore. |
| 14 | ii. Above 40 mm nominal bore |
| 15 | Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge. i. Including excavation and refilling trenches after taking out the pipes. a. Upto 150 mm diameter. |
| 16 | Supply of labours. i. Fitter |
| 17 | i. Asstt. Fitter |
| 18 | ii. Skilled |
| 19 | iii. Unskilled |
| 20 | iv. Motor Mechanic |
| 21 | v. Electrician |
| 22 | vi. Carpenter |
| 23 | vii. Mason |
| 24 | Vii. Chowkidar |
| 25 | Dismantalling of MS Flanged pipe Joints by Manual means including refixing of flanged pipe joints by way of necessary welding, new nuts bolts & washers, this also includes removal of blockades with all leads & lifts. The unserviceable materials shall be returned to divisional store complete Job.i. 200mm dia |
| 26 | i. 150mm dia |
| 27 | ii. 100mm dia |
| 28 | iii. 80mm dia |
| 29 | iv. 65mm dia |
| 30 | v. 50mm dia |
| 31 | vi. 40mm dia |
| 32 | Providing & fixing of MS Flanges joints including cost of cutting of pipes, welding, nuts, bolts & washers complete job.i. 200mm dia 8mm thick |
| 33 | i. 150mm dia 8mm thick |
| 34 | ii. 100mm dia 8mm thick |
| 35 | iii. 80mm dia 8mm thick |
| 36 | iv. 65mm dia 8mm thick |
| 37 | v. 50mm dia 8mm thick |
| 38 | Vi. 40mm dia 8mm thick |
| 39 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe). |
| 40 | Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc. (excluding cost of specials) |
| 41 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. (Subject to actual quantities during execution).i. 100 mm dia pipes |
| 42 | ii. 150 mm dia pipes |
| 43 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. i. 15 mm and 20 mm dia. G.I. pipes |
| 44 | i. 25 mm and 32 mm dia. G.I. pipes |
| 45 | ii. 40 mm and 50 mm dia. G.I. pipes |
| 46 | iii. 65 mm and 80 mm dia. G.I. pipes |
| 47 | v. 100 mm and 150 mm dia. G.I. pipes |
| 48 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light Classi. 15 mm dia. nominal bore |
| 49 | i. 20 mm dia. nominal bore |
| 50 | ii. 25 mm dia. nominal bore |
| 51 | iii. 32 mm dia. nominal bore |
| 52 | iv. 40 mm dia. nominal bore |
| 53 | v. 50 mm dia. nominal bore |
| 54 | vi. 65 mm dia. nominal bore |
| 55 | vii. 80 mm dia. nominal bore |
| 56 | vii. 100 mm dia. nominal bore |
| 57 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete.i. 25 to 40 mm nominal bore |
| 58 | ii. 50 to 80 mm nominal bore |
| 59 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters. i. Upto 150 mm diameter. |
| 60 | ii. Above 150 mm diameter |
| 61 | Providing, fixing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 6mm to 10mm thick MS. plate as per the requirement of site. This item includes cost of lead, spun yarn, R.I. cloth and lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof and should be painted with Anticorrosive Red Oxide Primer and incld. all carriages, leads lifts, etc. complete. (Subject to actual quantities during execution). |
| 62 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. i. Welded |
| 63 | Welding charges of leaking spots / sockets / Tees / Bends for GI Pipe including carriage of welding Machine DG Set with POL upto site of work including all leads and lifts complete job. (Complete Job).i. 150 /100mm dia |
| 64 | i. 80/65mm dia |
| 65 | ii. 50/40mm dia |
| 66 | iv.Below 40mm dia |
| 67 | Providing fixing of Regulatory Valve / Sluice Valves including cost of Flanged joints/Pipe Specials necessary including cost of nuts, bolts & washers complete Job.Zoloto/Kirloskar or any equivalent make.i. 150mm dia |
| 68 | i. 100mm dia |
| 69 | ii. 80mm dia |
| 70 | iii. 65mm dia |
| 71 | iv. 50mm dia |
| 72 | v. 40mm dia |
| 73 | Vi. 25mm dia |
| 74 | Dismantalling of spindle rod / check nuts & repairing the same for smooth functioning of regulatory valves this includes the cost of dismantalling of regulatory valves, welding charges, workshop charges including all necessary leads and lifts for all dia Regulatory Valves. |
| 75 | Providing of GI Pipe fittings of ISI / reputed MAKE to.(Subject to actual quantities during execution).i. ELBOWi. 100mm dia |
| 76 | i. 80mm dia |
| 77 | ii. 65mm dia |
| 78 | iii. 50mm dia |
| 79 | iv. 40mm dia |
| 80 | v. 25mm dia |
| 81 | vi. 20mm dia |
| 82 | ii. UNION of ISI marki. 100mm dia |
| 83 | i. 80mm dia |
| 84 | ii. 65mm dia |
| 85 | iii. 50mm dia |
| 86 | iv. 40mm dia |
| 87 | v. 25mm dia |
| 88 | vi. 20mm dia |
| 89 | iii. Socket of ISI marki. 100mm dia |
| 90 | i. 80mm dia |
| 91 | ii. 65mm dia |
| 92 | iii. 50mm dia |
| 93 | iv. 40mm dia |
| 94 | v. 25mm dia |
| 95 | vi. 20mm dia |
| 96 | iv. Reducer Socket of ISI marki. 100 x 80mm dia GI |
| 97 | i. 80 x 65mm dia GI |
| 98 | ii. 80 x 50mm dia GI |
| 99 | iii. 50 x 40mm dia GI |
| 100 | iv. 50 x 25mm dia GI |
| 101 | v. 40 x 25mm dia GI |
| 102 | vi. 40 x 20mm dia GI |
| 103 | vii. 25 x 20mm dia GI |
| 104 | v. Nipple of ISI mark (per inch) 150mm longa. 100mm dia |
| 105 | a. 80mm dia |
| 106 | b. 65mm dia |
| 107 | c. 50mm dia |
| 108 | d. 40mm dia |
| 109 | e. 25mm dia |
| 110 | f. 20mm dia |
| 111 | vi.Double Collara. 100mm dia |
| 112 | a. 80mm dia |
| 113 | b. 65mm dia |
| 114 | c. 50mm dia |
| 115 | d. 40mm dia |
| 116 | Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job. |
| 117 | Supply and filling of 2nd class sand / stone dust around pipes at different spots including cost of material i.e. stone dust from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing and watering including compaction after each 15cms thickness in all respects. Complete Job. (Subject to actual quantities during execution). |
| 118 | Clearance of wet silt from Service Reservoirs through washout pipe / buckets. The job includes dewatering charges/tools/ tackles required for the job and disposal of silt as per site requirement / as directed by the Engineer-Incharge. This item also includes scaffolding / lighting arrangement if required at site.. (Complete Job). |
| 119 | Cleaning of wall, shaft and beds of the Service Reservoirs by washing, brushing twice and cleaning silt by spraying water by pumping equipment and chemical washing of surface by spraying chemical solution. This item also includes bathing of pores then clearance of all surface after chemical bath by washing with clean water and ensuring zero alkanity. This item also includes all types of tools and plants used for execution of job. Complete Job. |
| 120 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: i. 1:3:6 or richer mix (i/c equivalent design mix) |
| 121 | ii. 1:4:8 or leaner mix (i/c equivalent design mix) |
| 122 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 123 | Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 124 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. |
| 125 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) . |
| 126 | ii. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 127 | iii. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 128 | iv. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 129 | Centering and shuttering including strutting, propping etc. and removal of form for: a. Foundations, footings, bases of columns etc. for mass concrete. |
| 130 | b. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 131 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level a. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 132 | b. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 133 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.i. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 134 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 135 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand). |
| 136 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. |
| 137 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. |
| 138 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: I. Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 139 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. |
| 140 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete. |
| 141 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing. |
| 142 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: a. 1:6 ( 1 cement : 6 coarse sand) |
| 143 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 144 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): a. First Class kail wood |
| 145 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. I. Second class Kail wood 30mm thick. |
| 146 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.1. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 147 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a. 100x10 mm |
| 148 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : a. 100 mm |
| 149 | Providing and fixing bright finished brass 100mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete. |
| 150 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: i. Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture. |
| 151 | Finishing walls with water proofing cement paint of required shade: i. Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 152 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : 15.28.1 G.S. Sheet |
| 153 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 154 | Cost of nocturnal arrangement if any required during emergency on account of hire charges of Illumination, transportation, traffic regulation arrangements etc. |
| 155 | Engagement of Hydraulic excavator with driver and fuel Including haltage. complete job. |
| 156 | Hire charges of welding plant including Gen. Set for welding of pipes including cost of fuel, electrodes and all sorts of carriages to & fro including man power complete job. |
| 157 | Hire charges of welding plant excluding Gen Set for welding of pipes including cost of fuel , electrodes and all sorts of carriages to & fro including man power complete job. |
| 158 | Dismantling C.I. / D.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineer in-charge. a. Including excavation and refilling trenches after taking out the pipes. i. Upto 150 mm diameter. |
| 159 | ii. Above 150 mm diaupto 300 mm dia. |
| 160 | iii. Above 300 mm diameter. |
| 161 | b. Excluding excavation and refilling trenches after taking out the pipes. i. Upto 150 mm diameter. |
| 162 | ii. Above 150 mm diaupto 300 mm dia. |
| 163 | iii. Above 300 mm diameter. |
| 164 | Dismantling D.I. pipes manually/ by mechanical means including removing of rubber gasket, defrosting the pipe line by placing the same on fire wood including cost of fir wood, kerosene oil, salt including cost of all T&P & stacking of pipes and lead at site within 50Mtrs lead as per direction of Engineer in-charge. a. Including excavation and refilling trenches after taking out the pipes. i.Upto 100 mm dia upto 150mm dia . |
| 165 | ii. Above 150 mm diaupto 300 mm dia. |
| 166 | iii. Above 300 mm diameter. |
| 167 | b. Excluding excavation and refilling trenches after taking out the pipes. i. Upto 100 mm upto 150mm dia. |
| 168 | ii. Above 150 mm diaupto 300 mm dia. |
| 169 | iii. Above 300 mm diameter. |
| 170 | Carriage of Materials by Mechanical Transport.i. Cement/Steel avg lead 1km. |
| 171 | i. Stone Soling avg lead 1Km. |
| 172 | ii. Stone avg lead 1Km. |
| 173 | iii. Sand avg lead 1Km. |
| 174 | iv. Coarse Agg 40mm N/S avg lead 1Km. |
| 175 | v. Coarse Agg 20mm N/S avg lead 1Km. |
| 176 | vii. Bricks avg lead 1Km Per 1000 Bricks |
| 177 | Hire charges of load carrier/mini truck for carriage of chemicals and other allied items/equipments (excl. pipes) from Divisional Store upto various sites & locations incl carriage of dismantled salvaged pipes(serviceable/unserviceable) from site to Divl. store incl. loading ,unloading & stacking charges.(to be paid as per gate pass trip). Complete job. |
| 178 | Repairing of defunct street lights by way of replacing of damaged Bulbs, wires, switches & other necessary accessories needed for making the light functional including Returning back the salvaged material to divisional store this also includes all leads & lifts complete Job. |
| 179 | Engagement of Hydraulic Crane with driver and fuel Including haltage. complete job. |
| 180 | Engagement of Compressor with driver and fuel Including haltage. complete job. For blockade removal. |
| 181 | Clearing snow (with frost) from Roads, manually using picks and shovels; snow depth upto 150 mm. |
| 182 | Clearing Snow (without frost) from Roads, manually; i. Snow depth upto 150 mm |
| 183 | i. Snow depth over 150 mm but upto 250mm |
| 184 | ii. Snow depth over 250 mm but upto 350mm |
| 185 | iii. Snow depth over 350 mm but upto 450mm |
| 186 | iv. Snow depth over 450 mm but upto 550mm |
| 187 | v. Snow depth over 550 mm but upto 650mm |
| 188 | vi. Snow depth over 650 mm but upto 750mm |
| 189 | vii. Snow depth over 750 mm but upto 850mm |
| 190 | viii. Snow depth over 850 mm but upto 950mm |
| 191 | ix. Snow depth over 950 mm but upto 1050mm |
| 192 | x. Snow depth over 1050 mm but upto 1150mm |
| 193 | xi. Snow depth over 1150 mm but upto 1250mm |
| 194 | Providing, fixing & testing upto 10 Watts LED Bulbs by repalcing damaged LED Lamps this also includes all other accessories required for Successful installation. |
| 195 | Providing, fixing & testing above 10 Watts LED upto 20 Watts Bulbs by replacing damaged LED Lamps this also includes all other accessories required for Successful installation. |
| 196 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge.i. All kinds of soil : |
| 197 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres .i. All kinds of soil. |
| 198 | Providing fixing of Gate Valves including cost of Pipe specials required for fixing .This also includes cost of dismanatling of old damaged gate valve with reuturn to Divisional store complete Job.Zoloto/VAG/Kirloskar or any equivalent make. i. 80mm dia |
| 199 | i. 65mm dia |
| 200 | ii. 50mm dia |
| 201 | iii. 40mm dia |
| 202 | iv. 25mm dia |
| 203 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). i. 50 mm dia. |
| 204 | ii. 80 mm dia. |
| 205 | iii. 100 mm dia. |
| 206 | Providing & fixing DI Pipe Specials including all sorts of Carriage upto site of work including cost of rubber gaskets , washers , nuts & bolts etc complete Job including successful testing & commisioning of joints.i. 150mm Dia DI Bend |
| 207 | ii. 100mm Dia DI Bend |
| 208 | i. 80mm Dia DI Bend |
| 209 | ii. 150/100MM Dia DI reducer |
| 210 | iii. 100/80MM Dia DI reducer |
| 211 | i. 100/100 Equal Tee |
| 212 | ii. 80/80 Equal Tee |
| 213 | iii. 150/150 Equal Tee |
| 214 | iv. 150/100 Tee |
| 215 | v. 100/80mm Tee |
| 216 | vi. 150mm Dia TAIL Piece Male/Female |
| 217 | vii. 80mm Dia TAIL Piece Male/Female |
| 218 | viii. 100mm Dia TAIL Piece Male/Female |
| 219 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. i. Made of G.I. wire of dia 4 mm |
| 220 | Supply of T&P (Taparia or other equivalent ISI make) a. 24 inch wrench |
| 221 | a. 18 inch wrenh |
| 222 | b. 14 inch wrenh |
| 223 | c. 12 inch wrench |
| 224 | d. Die set 10 to 25mm |
| 225 | e. Die set 25 to 50mm |
| 226 | f. Chain Tong 100/150mm |
| 227 | g. Pick axes |
| 228 | h. Showels |
| 229 | i. Steel Jamble |
| 230 | j. Hammer |
| 231 | k. Hexa frame with blade |
| 232 | l. Blade |
| 233 | Repairing of water Geyser.a. Heating element ALuminium made |
| 234 | a. Thermostat Autocut |
| 235 | b. Indicator lights |
| 236 | c. 3 pin plug 15 Ampere IS made |
| 237 | d. Copper Wire 2.5mm thick, 2.00Mtr. |
| 238 | e. Gyser bolts 4 No. MS |
| 239 | f. PVC connection length 450mm, 15mm. |
| 240 | g. Angle valve 15mm if IS make |
| 241 | Hire charges of commercial vehicle including POL along with comercial driver licensed.i. upto 20 Km per day. |
| 242 | ii. Beyond 20 km upto 50 Km per day. |
| 243 | Supply of lead, spun Yarn, Fire Wood Kerosene including all carriages upto site of work.i. Lead |
| 244 | i. Spun Yarn |
| 245 | ii. Fire Wood |
| 246 | iii. Kerosene |
| 247 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 248 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of EngineerIn-charge complete in all respect. i. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. |
| 249 | ii. Epoxy bonding adhesive having coverage 2.20 sqm/kgof approved make. |
| 250 | Chipping of unsound/weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge i. 75mm average thickness |
| 251 | ii. 50mm average thickness |
| 252 | iii. 25mm average thickness |
| 253 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 254 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 255 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: I. Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture. |
| 256 | Hire charges for:a. Core cutting / wall saw cutting machine along with operator. |
| 257 | b. Concrete drill / hammer drill machine. |
| 258 | c. Brush cutter machine along with operator including POL. |
| 259 | Providing, fixing of NRV including cost of flanged joints / pipe specials necessary including cost of nuts, bolts and washers complete job. Zoloto / Kirloskar made.a. 150mm dia |
| 260 | a. 100mm dia |
| 261 | b. 80mm dia |
| 262 | c. 65mm dia |
| 263 | d. 50mm dia |
| 264 | e. 40mm dia |
| 265 | d. 25mm dia Please Enable Macros to View BoQ information |
