Tender For Civil & Sanitary Work Under Stage Contract Group B For The Year 2026-2027 At Skims, Soura Sgr., Srinagar-Jammu And Kashmir

TDR : 55127248

Tender Notice
BOQ

12 Days Left

Srinagar , Jammu And Kashmir

Tender Brief : Tender For Civil & Sanitary Work Under Stage Contract Group B For The Year 2026-2027 At Skims, Soura Sgr.

Document Fees
₹ 2600 /-

EMD
₹ 300000.0 /-

Tender Value
₹ 1.50 Crore /-

Submission Date
29-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like , including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed lead upto 50 meters . All kinds of soil
2	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil
3	Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :
4	Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in- Charge. ( All kinds of soil :)
5	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :
6	Extra lead beyond 1.5 m upto 1 Km
7	Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material( All kinds of soil)
8	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating on deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
9	Supplying and filling in plinth with sand under floors including, watering, ramming, consolidating and dressing complete from surface drains and disposal including all carriages
10	Supplying stacking and laying of good earth at site including royalty spreading, levelling watering in layers and consolidated with hand rolling including all carriages.(finished work to be measured)
11	P/L of stone soling of required sizes , compacting , watering and ramming, complete including all carriages.
12	Providing, fitting, spreading of GSB filling (Nallah Muck ) from approved source including watering , compacting and rolling in 150 mm layers complete including all carriages.
13	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering including all carriages.
14	(A) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
15	(B) 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
16	(A) 1::3 :6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size).
17	(D) 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
18	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).including all carriage.
19	(a) (upto plinth level)
20	(b) (Above plinth level)
21	Centering and shuttering including strutting, propping etc. and removal of form for any locations such as
22	(a).Suspended floors, roofs, landings, balconies and access platforms and shelves.
23	(b) Foundation,footings,basis of columns etc.
24	Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc.
25	Lintel, beams, plinth beams, girders, bressumers and cantilevers.
26	Columns, pillars, piers, abutments, posts and struts.
27	Stairscases including landings.
28	Edges of slabs and breaks in floors and walls ( Under 20 cm wide )
29	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500 or more.
30	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :
31	(A) Cement mortar 1:4 ( 1 cement : 4 coarse sand)
32	(B) Cement mortar 1:6 ( 1 cement : 6 coarse sand)
33	Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
34	Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :
35	(a) Cement mortar 1:3 ( 1 cement : 3 coarse sand)
36	(b) Cement mortar 1:4 ( 1 cement : 4 coarse sand)
37	Extra for half Brick masonry in superstructure above plinth level upto floor V level.
38	Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:3 (1 cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (18mm thick) (Granite of any colour or shade as approved by Engineer-incharge).
39	(a) Area of Slab upto 0.5 sqm.
40	(b) Area of Slab over 0.5 sqm.
41	Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates, ceiling joists frame work and or like components.(First class Budloo wood).
42	Providing Wood work in frames of doors and windows and other frames, wrought framed and fixed in position.
43	(a) (1st class deodar wood)
44	(b) (2nd class deodar wood)
45	(c )(1st class Kail wood)
46	(d) (Imported wood(KD))
47	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (35mm) (With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws).
48	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws size) 35 mm thick
49	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge (35 mm thk).
50	(a)First class deodar wood.
51	(b)2nd class deodar wood.
52	( c)First class kail wood.
53	(d)KD(Imported wood.)
54	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge (30 mm thk).
55	(a)First class deodar wood.
56	(b)2nd class deodar wood.
57	( c)First class kail wood.
58	(d)KD(Imported wood.)
59	Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm to 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35 mm
60	(a) First class deodar wood.
61	(b) 2nd class deodar wood.
62	(c )First class kail wood.
63	(d) KD(Imported wood.) or pannelled.
64	Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm to 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30 mm
65	(a) First class deodar wood.
66	(b) 2nd class deodar wood.
67	(c )First class kail wood.
68	(d) KD(Imported wood.) or pannelled.
69	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).
70	(a) First class deodar wood.
71	(b) 2nd class deodar wood.
72	(c ) First class kail wood.
73	(d) KD(Imported wood.)
74	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone
75	Providing wood work in frames of false ceiling.partitionong etc.sawn and fixed in position
76	(a) (Budloo wood)
77	(b) Imported Wood(KD)
78	(c ) Poplar wood
79	Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
80	(a) 125x75x4 mm
81	(b) 125x63x4 mm
82	( c) 100x75x4 mm
83	(d) 100x63x4 mm
84	( e) 75x63x4 mm
85	(f) 50x40x2.5 mm
86	Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
87	(a) 300x10 mm
88	(b) 250x10 mm
89	© 200x10 mm
90	(d) 150x10 mm
91	( e) 100x10 mm
92	(P/F of ISI marked M.S pressed butt Hinges
93	(a) 125 mm
94	(b) 100 mm
95	(c ) 75 mm
96	(d) 50 mm
97	P/F of M.S Hinges 125mm welded heavy
98	(P/F of M.S Hinges for gates)
99	(a) 100mm
100	(b) 150mm
101	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
102	(a) 125 mm
103	(b) 100 mm
104	© 75 mm
105	(d) 200 mm
106	(e) 150 mm
107	(f) 175 mm
108	P/F of ornamental Handle of approved quality:(Stainless Steel)
109	(a) 75 mm
110	(b) 100 mm
111	(c )150 mm
112	(d) 200 mm
113	P/F of Aldrop of approved quality(200mm) (Stainless Steel) Heavy
114	(a) 2'4''
115	(b) 1'6''
116	( c) 1'0''
117	P/F Powder coated Aluminum handles of approved quality.
118	(a) 75 mm
119	(b) 100 mm
120	(b) 125 mm
121	( c) 150 mm
122	(d) 200 mm
123	P/F of Piano Hinges including cost of screws complete.
124	P/F of stainless steel telescopic drawer channels(450 mm)
125	P/F of stainless steel telescopic drawer channels(300 mm)
126	P/F of Hydraulic door spring including all costs.
127	P/F of Hydraulic doorcloser of approved quality.
128	Providing and fixing wooden moulded cornice beading triangular shape to the junction/corner/edges of paneling etc. with iron nails screws, plugs and priming coat on unexposed surface etc. complete. (First class kail wood).
129	(a) 50*50
130	(b) 40*40
131	(c ) 25*25
132	P/f of ornamental wooden cornice imported (32*32)
133	Plastic beading 25 mm ( approved one )
134	PVC Beading 20 mm
135	p/f of 20*12mm ornamental kail wood beeding fixed with nails and wood screw complete.
136	p/f of PVC angle beeding (25*25)
137	p/f of PVC beeding (25mm)
138	P/f of pvc cornice
139	(a) 50*50
140	(b) 40*40
141	( c) 25*25
142	P/F wooden D-type beading (20-25 mm)
143	Providing and fixing deoder wood lipping/moulded beading of size 35x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge.
144	P/F 40mm * 6 mm ply lipping.
145	Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminum doors of approved quality with necessary screws etc. complete as per direction of Engineer-in-charge.
146	P/F of Long Key Lock of approved quality ISI make including fixing with necessary screws, nuts, bolts etc complete, ( approved ones ) .
147	P/F of hardware fittings of approved quality ISI make including fixing with necessary screws, nuts, bolts etc complete, ( approved ones ) .
148	a. Link rod Lock 11” long
149	b. Link rod Lock 8” long
150	Providing and fixing magnetic catcher of approved quality in cupboard/wardrobe shutters including fixing with necessary screws etc. complete. (Godrej/link)
151	Multi purpose locks of required size approved one (link) or equivalent.
152	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
153	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. ( In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.)
154	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. ( Hot finished welded type tubes)
155	Structural steel work welded in built up sections, trusses. Framed work. Including cutting, hoisting, fixing in position welded and applying a priming coat of approved steel primer all complete.(Welded)
156	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.(completejob)
157	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.(50 mm thick)
158	Kota stone slab flooring 25 mm thick over 20mm (average) thick 1:4 cement mortar base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing.
159	Pre-polished Kota stone slab flooring 25 mm thick over 20mm (average) thick 1:4 cement mortar base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete.
160	Providing and fixing Ist quality ceramic glazed wall tiles of approved make, in all colours, shades(of 7-8 mm thick of different sizes) as approved by Engineer- in-Charge, in walls, skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.300x450mm
161	Providing and laying nonskid Glazed Ceramic floor tiles of size 300x300 mm or more ,8-10 mm thick of 1st quality of approved make, laid on 20 mm thick cement mortar 1:3 (1 Cement : 3 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
162	Providing and laying vitrified floor tiles with water absorption less than 0.08% of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.(10 mm) ( Size of tile 600x600 mm).
163	Providing and laying Full body vitrified floor tiles with water absorption less than 0.08% of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.(10 mm) ( Size of tile 600x600 mm).
164	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite Work)
165	Regrinding of granite/marble/kota stone/mosaic flooring/skirting etc.including repairs of cracks/edges and including rubbing polishing etc.complete job.
166	Kerb stones 150 mm size chisel dressed on top and sizes of required length in 1:4 mix and pointing with cement morter 1:2 mix including making drainage openings complete.
167	(a) Providing and Fixing
168	(b) Fixing only
169	Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.
170	P/L precast cement concrete tiles 25 mm thick(rubber moulded)in foot path and court yard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing cleaning and curing complete on 20 mm thick bed of cement mortar 1:4(1-cement;4-coarse sand) dark shade using ordinary cement.
171	Providing and laying 50mm thick factory made cement concrete(rubber moulded) interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge
172	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
173	(a) 0.63 mm thick with zinc coating not less than 275 gram/m2
174	(b) 0.50 mm thick with zinc coating not less than 275 gram/m2
175	(c ) P/F of color coated of different profile sheets with min. thickness of 0.50 mm including ridges valleys etc.complete job.
176	(d) Plain G.S Sheets 0.50 mm
177	P/F of Ridge or hips,valley of plain GS sheets in ridges/valleys/gutters and wherever required including fixing with J/L hooks all complete.(0.5 mm thick)
178	(a) 45 cm
179	(b) 60 cm
180	(c ) 90 cm
181	Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 gram/m2)
182	P/L Cement plaster of mix(1:4):(1 Cement:4 coarse sand)
183	(a) 12 mm
184	(b) 15 mm
185	(A)Washed stone grit plaster on exterior walls of height upto 10 m above ground level in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per m2, top layer 15mm cement plaster 1:1/2 :2 (1 cement: 1/2 coarse sand : 2 stone chippings 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in -charge (payment for providing groove shall be made separately).
186	Extra for washed grit plaster on exterior walls of height more than 10m ground level for every additional height of 3m or part thereof
187	Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : (15 mm wide and 15 mm deep groove)
188	Providing and applying POP/ putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
189	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
190	Applying With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
191	With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work
192	Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
193	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.(two or more coats on new work)
194	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
195	Removing white or color wash /distemper/paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
196	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
197	Varnishing with varnish of approved brand and manufacturer( one or more coats.).
198	French spirit polishing, Two or more coats on new works including a coat of wood filler
199	French spirit polishing, one or more coats on old work
200	Applying knify grey paste of approved quality over wood/cement surface including sanding complete.
201	Removing old paint from wooden surface by scrapping/sand papering/using blow lump.etc
202	Finishing Walls with waterproofing cement paint
203	Renewing glass panes, with wooden fillets and nails wherever necessary.
204	(a) Float glass panes of thickness 3.5mm to 4 mm thickness
205	(b) Float glass panes of thickness 5 mm
206	(c) P/F of Frosted glass of thickness 5 mm
207	Demolishing cement concrete manually/mechanical means including disposal of material within 500 meters lead as per direction of Engineer-incharge:(1:3:6 or richer mix)
208	Demolishing R.C.C. work manually/mechanical means including stacking of steel bars and disposal of unserviceable material within 500 meters lead as per direction of Engineer- in-charge.
209	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: (In cement mortar).
210	Dismantling/Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :
211	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.
212	(Dismantling tile work in floors, walls and roofs laid in cement mortar including stacking material within 50 meters lead.( For thickness of tiles 10 mm to 25 mm)
213	Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead.
214	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
215	P/F white vitreous chins flat back or wall corner type lipped front urinal basin 430260350mm and 340410265 mm sizes respectively with flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including fittings and brackets cutting and making good the walls and floors and wherever required. (1 urinal basin with 5 litre white P.V.C flushing cistern.
216	Construction of WC Plateform including all materials,brickworks,sand cement concrete plaster all complete including dismantling of exisiting work .etc. complete job excluding WC.
217	(a) p/f White vitrous indian type W.C (Orisa pattern) size 580*440mm with integrated foot rest.
218	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
219	(a) White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
220	(b) Stainless Steel AISI- 304 (18/8) Orissa pattern W.C. pan of size 585x480mm with flush pipe and integrated type foot rests
221	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C pan with ISI marked white solid plastic seat and lid
222	white solid plastic seat and lid
223	10 lit low level P.V C flushing cistern
224	CP long bend 32 mm dia
225	White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
226	white vitrous china pedestal for wash basin
227	looking mirror(12” x 18”)
228	P/F of looking mirror glass 3.5 mm to 4 mm
229	P/F of C.P fittings and fixtures (Approved by Engineer Incharge)(Jaquar/Cera/Hindware)
230	(a) bib cock long body including CP Cup
231	(b) bib cock short body including CP Cup
232	(c ) pillar cock/sink cock including CP Cup
233	(d) wall mixer two holes including CP Cup
234	(e ) cp arm for shower
235	(f) wall mixer with showers including CP Cup
236	(g) Sink mixer(single hole) including CP Cup
237	(h) Grating 100 mm
238	(i) CP tube 45-60 cm
239	(j) Towl Ring 8-9\\" (stainless Steel)
240	(k) Cloth Hanger
241	(l) soap case
242	(m) Mixer leg
243	(n) Towl Rod 600mm (stainless Steel)
244	(o) CP Nipple 15*25 mm
245	(p) CP Nipple 15*40 mm
246	(q) CP Nipple 15*50 mm
247	(r) angle valve 15 mm with C.P Cup
248	( s) C.P Cup
249	(t) Geyser bolt
250	(u) Stainless steel sink
251	(v) C.P Paper Holder with C.P Cup
252	Stainless steel sink with drain board 510*1040 mm
253	two in one Bibcock including CP Cup
254	P/F health faucet with 1 mm C.P chain
255	P/F health faucet without chain
256	P/F of Telephonic shower with chain including CP Cup
257	P/F of high neck swan type C.P mixers Jacquar / approved one with hot / cold controls. including CP Cup
258	Dash Fastener
259	P/F of elbow action C.P mixers of approved make including CP Cup
260	PVC corners shelf (Set of 3 PCS)
261	PVC connection(24”)
262	PVC connection(18”)
263	PVC connection(36”)
264	P/ f spindle heavy duty for mixer and bib cock(Disc/Gem)
265	C.P Shower Arm
266	P/F urinal C.P spreader heavy quality
267	Pf of white vitreous china urinal
268	p/f basin nut(tar chand)
269	P/F of CP waist for steel sinks heavy duty
270	a. 50mm dia
271	b. 75mm dia
272	c. 100mm dia
273	Providing of CP Knob (Gem/Parko)
274	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet.
275	(a) 100 mm diameter
276	(b) 150 mm diameter
277	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints completeas per direction of Engineer-incharge.
278	(a) PN-16 pipe, 16mm OD(SDR-7.4)
279	(b) PN-16 pipe , 20mm OD(SDR-7.4)
280	(c ) PN-16 pipe , 25mm OD(SDR-7.4)
281	(d) PN-16 pipe , 32mm OD(SDR-7.4)
282	(e ) PN-16 pipe , 40mm OD(SDR-7.4)
283	(f) PN-16 pipe , 50mm OD(SDR-11)
284	Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
285	(a) PN-16 pipe, 16mm OD(SDR-7.4)
286	(b) PN-16 pipe , 20mm OD(SDR-7.4)
287	(c ) PN-16 pipe , 25mm OD(SDR-7.4)
288	(d) PN-16 pipe , 32mm OD(SDR-7.4)
289	Providing and fixing PPR Unions
290	(a) PPR Union 15mm
291	(b) PPR Union 20mm
292	(c ) PPR Union 25mm
293	(d) PPR Union 32mm
294	(e ) PPR Union 40mm
295	(f) PPR Union 50mm
296	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls, excavation work and refilling etc.complete.etc.(internal/external)
297	(A):(medium Grade )
298	(i) 15 mm dia. nominal bore
299	ii) 20 mm dia. nominal bore
300	iii) 25 mm
301	iv) 32 mm
302	v) 40mm dia
303	vi) 50 mm
304	(B)Concealed type including cutting chasses and making good the walls
305	(i) 15 mm dia. nominal bore
306	(ii) 20 mm dia. nominal bore
307	P/F of G.I assorted fittings of nominal bore of ISI make heavy quality including dismantling including removing of old one wherever required (approved one)
308	A. 15mm nominal bore
309	a. Socket
310	b. Elbow
311	c. Tee
312	d. Plug
313	e. Nipple 75 mm long
314	f. Niple 100 Mm long
315	f. Niple 150 Mm long
316	g. Tankey Nipple
317	B. 20 mm Nominal Bore
318	a. Socket
319	b. Elbow
320	c. Tee
321	d. Plug
322	e. Nipple 75 mm long
323	f. Niple 100 Mm long
324	f. Niple 150 Mm long
325	g. Tankey Nipple
326	C. 25 mm Nominal Bore
327	a. Socket
328	b. Elbow
329	c. Tee
330	d. Plug
331	e. Nipple 75 mm long
332	f. Niple 100 Mm long
333	g. Tankey Nipple
334	D 32 mm Nominal Bore
335	a.Elbow
336	b.Tankey Nipple
337	c.Reducer 20X 15 mm
338	d.Reducer 25X 20 mm
339	D 50 mm Nominal Bore
340	a.Elbow
341	b.Tankey Nipple
342	c.Reducer 20X 15 mm
343	d.Reducer 25X 20 mm
344	Insulation of exposed water supply pipes (including fittings) on walls and roof tops upto water storage tanks BWO 50 mm glass wool with chicken mesh woomed with 16-18 guage wire and finished with 6-8 mm 1:10 coat of POP/ cement finished and glove/ deru incl removal of damaged insulation and scaffolding and clearance of site after completion of job
345	a. 15 mm dia
346	b. 20 mm dia
347	c. 25 mm dia
348	d. 32 mm dia
349	e. 40 mm dia
350	f. 50 mm dia
351	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
352	(a)15 mm nominal bore
353	(b) 20 mm nominal bore
354	(c ) 25 mm nominal bore
355	(d) 32 mm nominal bore
356	(e ) 40 mm nominal bore
357	( f) 50 mm nominal bore
358	P/F heavy duty ball cock with 300 mm brass rod and ball complete incl. removing damaged one where ever required.
359	a. 15mm
360	b. 20mm
361	c. 25mm
362	P/F of PVC heavy duty ball cock to fit into all kinds of flush tanks (compact one) of standard make (approved one)15mm dia
363	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete.
364	(a) 15 mm nominal bore
365	(b) 20 mm nominal bore
366	© 32 mm nominal bore
367	(d) 40 mm nominal bore
368	p/f G.I crossover(15 mm)
369	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
370	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia.and size including Necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.)
371	(a) Frame (powder coated)
372	(b) Shutters (powder coated)
373	(c ) Anodized aluminum(Frames)
374	(d) Anodized aluminum(Shutters)
375	Providing and fixing glazing in aluminum door, window, ventilator Shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in- Charge. (Cost of aluminum snap beading shall be paid in basic item.)
376	(a) With floating glass panes of3.5 to 4.0 mm thickness (weight not less than 10.00 kg / sqm)
377	(b) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
378	p/f Flyproof of galvanized m.s wire guaze with 0.63 mm thk wire of and 1.4mm aperture in both sides for door/window.
379	P/F of aluminum composite pannel of approved make including cost of neoprene gasket/ silicon taping complete job in frames , ceiling etc
380	(a) 3 mm thick
381	(b) 5 mm thick
382	Providing and fixing stainless steel (Grade 304) railing , racks made of Hollow tubes channels, plates etc. including welding,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).including newel post complete.
383	P/F of 19mm thick board of approved quality and manufacture in shelves , partitions, tables, access panel , shutters and other shutters etc. fixed with nails/ wood screws complete
384	(a) Water proof
385	(b) Commercial
386	P/F of 6 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc. complete
387	P/F of 8 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc.complete.
388	P/F of 10 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc.complete.
389	P/F of 12 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc.complete.
390	P/F of lamination of 0.8 mm thick of approved quality and manufacture and of required shade and color fixed with standard quality of adhesive in all types of works (fitted and finished area to be measures and paid 0including cost of adhesive etc. complete in all respects.
391	(a)0.8 mm thick plain
392	(b)1 mm thick plain
393	(c) 1 mm thick textured.
394	(d) 0.80 mm thick textured.
395	P/F of Flat pressed 3-layer pre-laminated Board (Lamination on both sides) of approved quality including cost of screws/adhesive complete.
396	a. 12mm thick
397	a.18mm thick
398	P/F C.I pipes and fittings:
399	(A)Pipes
400	(a)150
401	(b)100
402	(d)50
403	(B) Plain Bend
404	(a)150
405	(b)100
406	(c) Door Bend
407	(a)150
408	(b)100
409	(D)Reducer
410	(a)150*100
411	(b)100*75
412	©75*50
413	(d) 20*15
414	(E)Cowl
415	(a)100
416	(a)75
417	(b)50
418	(F) Coller
419	(a)150mm
420	(b)100 mm
421	©75 mm
422	(d)Extra cost for lead coulked joints for C.I pipes
423	(e)P-Trap/Floor trap 100 mm
424	(f)P-Trap/Floor trap 150 mm
425	(g)Plain Tee 100 mm
426	(h)Plain Tee 150 mm
427	P/F of C.I manhole covers with frame (heavy duty ) approved ones of required shape and size.
428	a.600x600mm/600mm dia
429	b.450x450mm/450mm dia
430	c.300x300mm/225mm dia
431	P/F of PVC pipes/ fittings of approved make and quality of following diameter:
432	(A)Pipes
433	a.32 mm
434	b.40 mm
435	c.50 mm
436	d.75 mm
437	e.100 mm
438	f.150 mm
439	(B)Door Bend
440	(a)150 mm
441	(b)100mm
442	©75 mm
443	(d)50 mm
444	(C)plain Bend
445	(a)150 mm
446	(b)100mm
447	©75 mm
448	(d)50 mm
449	(D)Coller
450	(a)150 mm
451	(b)100mm
452	( c)75 mm
453	(d )50 mm
454	(E)plain-Tee
455	(a)50 mm
456	(b)75 mm
457	(c) 100 mm
458	(d)150 mm
459	(e)P-Trap(100 mm)
460	(f)Floor-Trap(100 mm dia)
461	(g)Waste pipe
462	(h)45 Degree Bend(100 mm)
463	(i)Reducer(75-100 mm)
464	(j)Door Tee(75 mm)
465	(k)Door Tee(100 mm)
466	(l)PVC Cowel
467	Elbow
468	(a)50 mm
469	(b)75 mm
470	(c)100 mm
471	(d)150 mm
472	P/F of M.S Push cocks 15mm complete (approved one)
473	P/F of Cornice/door profile for MDF wall panelling of required size
474	P/F of MDF imported Wooden Laminated Flooring of Approved pattern and Brand/Make in desired color including cost of foam etc complete job
475	P/F of MDF wall panelling imported of Approved pattern and Brand/Make in desired color including cost of jambs etc complete job
476	P/f of imported wooden panelling.T&G
477	P/F of PVC (plastic) wall panelling of Approved pattern and Brand/Make in desired color.
478	P/f of wooden tiles of required size and pattern [ budloo].
479	P/f wall paper of superior quality (sample to be approved by engineer-in charge).
480	Khatam bandh ceiling of approved pattern and brand/make including 10 mm thick plybase and frame work etc.complete job.
481	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.
482	Inside size 45x45 cm and 45 cm deep including C.I. cover with frame(total wt. of frame/cover to be not less than 38KG)
483	Inside size 90x80 cm and 45 cm deep including C.I. cover with frame(total wt. of frame/cover to be not less than 38KG)
484	Inside size 90x80 cm and 60 cm deep including C.I. cover with Frame(total wt. of frame/cover to be not less than 38KG)
485	Inside size 120x90 cm and 90 cm deep including C.I. cover with Frame(total wt. of frame/cover to be not less than 116KG)
486	Supply of Labour/ for Snow /drain /road clearance and other civil works
487	Supply of Helper( 2nd class welder/mason/Plumber) carpenter/Aluminum fitte.)
488	Supply of Skilled Labor (carpenter/ mason/ welder /plumber) Aluminum fitter)
489	Engagement of JCB/Loader on hire basis
490	Engagement of Tipper on hire basis
491	Engagement of Hand cart on hire basis
492	Engagement of Tractor on hire basis
493	P/F of 1 mm thick poly carbonate sheets including cost of screws/washers complete.
494	P/L of RCC spun pipes(including all carriages)
495	(a). 150 mm dia
496	(b). 200 mm dia
497	©. 250 mm dia
498	(d). 300 mm dia
499	( e). 450 mm dia
500	(f). 500 mm dia

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Civil Construction Tenders

Plumbing and Sanitary Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Civil & Sanitary Work Under Stage Contract Group B For The Year 2026-2027 At Skims, Soura Sgr., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Civil & Sanitary Work Under Stage Contract Group B For The Year 2026-2027 At Skims, Soura Sgr., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us