|
| 1 | M&L for repairs to pot holes of any depth not exc 1.00 sqm each in area including sweeping free from dust and mud or water, scoring the sunken surfaces in roads etc cutting around edges to at least 25mm in depth , making good by applying tack coat @ 5kg per 10 Sqm (using paving bitumen of VG-10 grade), putting in premixed bituminous macadam, well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed. |
| 2 | Material and Labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth not exc 50 mm etc complete all as specified and as directed. |
| 3 | Screening road metal, Chippings, etc. on the site of the work, when specially ordered,including removing screened materials clear of screen and stacking in separate heaps formeasuring (Materials from both sides of screen measured) |
| 4 | M & L for labour for premix bituminous macadam(Design Mix) with minimum 40-60 TPH bach type HMP using crushed stone aggregates of specified grading, premixed with VG-30 bituminous binder @ 4% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying with a hydrostatic paver finished to the required grade, level and alighnment, rolling with smooth wheeled, vibratory and tandem roller to achieve the dezire compaction as per MORTH specification clause no 505 complete in all respects, (consolidated thickness 75 mm or less) etc, complete all as specified and as directed. |
| 5 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed. |
| 6 | M & L for Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of VG-10 grade @ 5 Kg. Per 10 Sq. Metres.complete all as specified and as directed. |
| 7 | M&L Bituminous premix semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% binder content by weight of total mix by using Paving bitumen (VG-30 grade) as in semi dense asphaltik concrete mixed in hot mix plant, rolled with 8 to 10tonne power roller and compacted to required camber and gradient all as specified and as directed. |
| 8 | M& L for preparing bituminous surface of road and marking 2.5mm thick centre line,stop lines,dashes,arrows etc. and the like not exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS-3262-1989 with reflectorizing glass beads on bituminous surface with special applicator machine fitted with pufill shoe glass beads dispenser pupane tank heater and profile shoe heater with heating arrangement upto 160 degree C driven by experienced operator all as per manufacturer instruction complete all as specified and as directed.Note:- 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained. |
| 9 | S&F in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model no DA 972 fixed with and including MS stud of suitable size all as per manufacturers instructions and as directed. |
| 10 | S & F in repair Solar Cat eye aluminium alloy shall(100% water proofing design according to 65) of size 125 mm x125 mm x25 mm(Shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 v/0.3 watt one NI-ed rechargeable battery(1.2v/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufacturers instructions etc. complete all as specified and as directed. |
| 11 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 12 | M & L hardcore of gauge n.exc. 63mm of broken stone deposited, spread, levelled, in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 13 | Labour only for filling hardcore of gauge n.exc. 63mm of broken stone deposited, spread, levelled, in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed. |
| 15 | M&L for 100 mm thick PCC (1:4:8) type D2 ( using 40 mm graded crushed stone aggr)in sub base, floor.complete all as specified and directed. |
| 16 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as approved by GE and as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed.( Note :- Sand bedding layer will be measured and and paid seperately) |
| 17 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as approved by GE and as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed.( Note :- Sand bedding layer will be measured and and paid seperately) |
| 18 | M&L for 50 mm thick sand filling with sand cushioning for laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand complete all as specified and directed. |
| 19 | M&L for pre-cast cement concrete block masonry made of PCC (1:3 :6) type C-1 using 20 mm graded crushed stone aggregate with solid blocks,exc.10 cm in width and setting in cement mortar (1:6), including demolition of old brick masonry complete all as specified and as directed. |
| 20 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 21 | M&L for screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes complete all as specified and as directed. |
| 22 | M&L for coloured vitrified heavy duty ceramic scratch and stain resistant external tiles of size 40cmx 40cm x12 mm thick laid over and including 15mm thick CM(1:4) set jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 23 | M&L for 20 to 25 mm thick coloured, rubber moulded glossy finished factory made PCC designer tiles/Pavers, set and jointed & Pointed in neat cement slurry as in path/floor over and including a screed bed of 20mm thick in CM (1:4) etc complete all as specified and as directed. |
| 24 | M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specfied and as directed. |
| 25 | Material & Labour for preparation of new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specfied and as directed. |
| 26 | supplying and fixing Retroreflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved. Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A.The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete all as specfied and as directed. Please Enable Macros to View BoQ information |
