|
| 1 | Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in hard/ dense soil for laying of pipe line and getting out complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed. |
| 3 | Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 4 | Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 5 | Supplying, laying, jointing & testing of ductile iron pipes of 150 mm bore with socketed and spigot ends suitable for tyton joints centrifugally cast (spun) class 'K-9' confirming to IS: 8329 in any length laid in trenches with cement mortar internal lining and external zinc coating with a bitumen finishing layer as per IS complete all as specified and directed. |
| 6 | All as per Ser item No. 5.00 here in before but of size 100 mm bore. |
| 7 | Material & labour for ductile iron fittings for spigot and socket /fanged pipe such as bends (any type radius and angle) tapers any type (straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch , cross collers , caps and plugs upto 300 mm bore complete including taking down of old unsv fittings complete all as specified and directed. |
| 8 | Supply and fix in replacement ductile iron sluice valve PN-1.6 with flanged ends 150 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber boared gasket nuts, washers etc complete all as specified and directed. |
| 9 | All as per Ser item No. 8.00 here in before but 100 mm bore. |
| 10 | All as per Ser item No. 8.00 here in before but 80 mm bore. |
| 11 | Material & labour for PCC Block masonry valve pit of size 120 x 120 x 120 cm (internal dimensions of chamber) built in CM 1:6 including 10mm thick plastering internally with cement mortar 1:6 and flush pointing externally as the work proceeds in same mortar complete with 3.15mm thick MS sheet cover with angle iron 40 x 40 x 6mm frame, handle, locking arrangement including provisioning of 2 foot steps made out of MS 16mm round bars and painting steel surface (cover inside and outside with frame) with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 12 | Material & labour for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) for filling of road/path cutting etc complete all as specified and directed. |
| 13 | Taking up/down steel tubing 80mm dia GI/CI/PCC pipelines/connection from trenches incl connected fittings/accessories complete all as specified and directed. |
| 14 | All as per Ser item No. 13.00 here in before but of 50 mm bore. |
| 15 | All as per Ser item No. 13.00 here in before but of 40 mm bore. |
| 16 | All as per Ser item No. 13.00 here in before but of 25 mm bore. |
| 17 | All as per Ser item No. 13.00 here in before but of 20 mm bore. |
| 18 | Supply and laying in trenches GI pipe 80 mm bore medium grade ISI marked with all fittings complete all as specified and directed. |
| 19 | All as per Ser item No. 18.00 here in before but of 50 mm bore. |
| 20 | All as per Ser item No. 18.00 here in before but of 40 mm bore. |
| 21 | All as per Ser item No. 18.00 here in before but of 25 mm bore. |
| 22 | All as per Ser item No. 18.00 here in before but of 20 mm bore. |
| 23 | Supply and fix gun metal globe or gate valve of size 50 mm bore ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe complete all as specified and directed. |
| 24 | All as per Ser item No. 23.00 here in before but 25 mm bore. |
| 25 | All as per Ser item No. 23.00 here in before but 20 mm bore. |
| 26 | Supply and fix in replacement of Ball valves (Float valves) of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 27 | Material and labour for vibratory compacted, precast cement concrete rubber moulded, colored (except grey color), interlocking designer paver blocks in Milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. including surface excavation over area n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removing excavated soil exc 50 mtr but not exceeding 250mtr, earth work is also includes in this item rate complete all as specified and directed. |
| 28 | Material and labour for cement concrete 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and directed. |
| 29 | Material and labour for sand cushioning 25mm compacted complete all as specified and directed. |
| 30 | Note:- Amount of credit of Rs. 4750.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in PDF form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
