|
| 1 | SITC of High Centre Jet (a water jet system designed to create a strong, focused stream of water. This type of jet is often used in various applications, including irrigation, fountains, or industrial cleaning, where a powerful, concentrated flow is required to achieve efficient results.), brass constructionhaving 20 mm outlet with jet height of 14m having provision for slow rise and fall of jets. Proper Completion of work as per direction of E/Ic. |
| 2 | SITC of Two Tier Box Ring (a design concept often used in display settings or jewelry design. It consists of two stacked rings or tiers, typically with a box-like structure. This design can be functional for showcasing items, such as in retail or exhibitions, allowing for more vertical space and making the display more visually appealing. In jewelry design, it can refer to a ring that combines two distinct bands, providing depth and sophistication.), made of extruded aluminium pipe, having diameters 1.1 m & 1.5 m, having total 56 numbers chromium plated, brass, aluminium alloy nozzles.Proper Completion of work as per direction of E/Ic. |
| 3 | SITC of Central Outside Drop Ring ( a component that allows liquids or gases to drop or flow through at a controlled rate. This can be particularly relevant in systems involving water drainage or other fluid management systems. it typically pertains to a component used in constructions, drainage systems, or piping networks.) , made of extruded aluminium pipe, having a diameter of 1.8 m and consisting of 36 numbers chromium plated, brass, aluminium alloy nozzles. (make: premierworld/water works/wet design) as per direction of E/Ic. |
| 4 | SITC of Peripheral Inside Drop Ring ( a component used within plumbing, drainage, or fluid management systems.) , 1.16 m diameter, made of extruded aluminium pipe, each having 24 numbers chromium plated, brass, aluminium alloy nozzles.Proper Completion of work as per direction of E/Ic.. |
| 5 | SITC of Peripheral Outside Drop Ring , 1.5 m diameter, made of extruded aluminium pipe, each having 30 numbers chromium plated, brass, aluminium alloy nozzles.Proper Completion of work as per direction of E/Ic.. |
| 6 | SITC of Single Oscillating Jet (a specific type of fluid jet that oscillates (or vibrates) to create a pulsating flow pattern. This concept is used in various applications, including fluid dynamics, mechanical engineering, and industrial processes.).Proper Completion of work as per direction of E/Ic. |
| 7 | SITC of Straight Jet ( a fluid jet that flows in a straight line, maintaining a uniform direction and area without significant deviation or oscillation. ) , 10 mm outlet, brass construction.Proper Completion of work as per direction of E/Ic. |
| 8 | SITC of Supporting frame (Aluminium Extruded Channel) work with GI (Galvanized Iron) supporting stands for Two Tier Box (a design or container with two distinct levels or tiers. This concept is used across various contexts, including packaging, storage, furniture design, and more.) & Outside Drop Ring .Proper Completion of work as per direction of E/Ic. |
| 9 | SITC of Supporting frame (Aluminium Extruded Channel) and GI supporting stands made of galvanized steel (Medium Class) for peripheral Inside Drop & Outside Drop.Proper Completion of work as per direction of E/Ic. |
| 10 | SITC of Header for Straight Jets, made of extruded aluminium pipe with GI supporting stands made of galvanized steel (Medium Class).Proper Completion of work as per direction of E/Ic. |
| 11 | SITC of Mono submersible pump (A Mono Submersible Pump is a type of pump designed to operate underwater or in submerged conditions. These pumps are typically used for pumping water, sewage, or other fluids. ) (Make: Duke / Sona/Kirloskar/KSB/Eq.) with suction strainer: 3 hp – 5 nos, 5 hp – 1 nos.Proper Completion of work as per direction of E/Ic. 3HP |
| 12 | SITC of Mono submersible pump (A Mono Submersible Pump is a type of pump designed to operate underwater or in submerged conditions. These pumps are typically used for pumping water, sewage, or other fluids. ) (Make: Duke / Sona/Kirloskar/KSB/Eq.) with suction strainer: 3 hp – 5 nos, 5 hp – 1 nos.Proper Completion of work as per direction of E/Ic. 5HP |
| 13 | SITC of Solenoid valves (electromechanically operated valve that controls the flow of fluids (liquids or gases) in a system using an electric current to activate it. ) with 24 V DC coil (make: premierworld/water works/wet design)Proper Completion of work as per direction of E/Ic. |
| 14 | SITC of GI manifolds (a plumbing component made from galvanized iron that distributes fluids (liquids or gases) to several outlets from a single inlet. Manifolds are used in various applications, including water supply systems, irrigation, and industrial processes.) & connecting pipelines.Proper Completion of work as per direction of E/Ic. |
| 15 | SITC of GM Gate valves and NRV (essential components in fluid and gas control systems.) .Proper Completion of work as per direction of E/Ic. |
| 16 | SITC of LED light RGB, 36 W, 24 v DC, SS construction. Output: RGB and white. Body, top ring, mounting bracket. Fasteners: stainless steel AISI 304 Gland: Polymide Gasket: Elastomer Glass: Toughened Adjustable angle mounting bracket Professional grade electronic components Rating As per IP68 tested from a Govt of India Test Laboratory. (make: premierworld/water works/wet design) |
| 17 | Solenoid valve panel: 1 Sol valve panel made of 2mm thick sheet steel enclosure, foot mounted type, epoxy powder coated (Siemen’s grey). Front doors are hingeable & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5) Panel should have the main incoming feeder, bus bar chamber, instrument and component chamber and transformer chamber. a) Main incoming chamber consist of one number rated TP MCCB or MCB, ( make: MDS / Schneider/ L&T / Siemens / GE / Equivalent ). b) Bus bar Chamber consisting of rated current aluminium bus, with heat sink. c) Instrument Chamber consisting of digital / analogue Ammeter & Voltmeter with selector switches and phase indication lamp and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. d) Component chamber should have every channel protected by SP MCB, make – MDS / Siemens / Schneider/ L&T and every channel operated by the mini contactor (Make: Moeller / Schneider / GE) or PLA relay, 2 CO / 3 CO. Terminals (Elmex) are provided for every channel and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. |
| 18 | LED Ligh Panel 1. Panel made of 2mm thick sheet steel enclosure, foot mounted type, epoxy powder coated (Siemen’s grey). Front doors are hingeable & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5) Panel should have the rated main incoming TPN MCB (Make- MDS/ Siemens, L&T, Schneider), rated aluminium bus bar, digital/analogue ammeter and voltmeter with selector switch and every LED light channel protected by SP MCB (Make- MDS/ Siemens, L&T, Schneider) and operate through mini contactor (Make: Moeller / Schneider / GE) or PLA relay, 2 CO / 3 CO. Terminals (Elmex) and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. 6) Transformer Chamber – It consists of step down rated KVA air cooled transformer (Make – Reputed) suitable for LED light. |
| 19 | PMCC (Power &Motion Control) Panels: 1) Made of 2 mm thick sheet steel enclosure, foot mounted cubicle type, epoxy powder coated (Siemens grey). Front doors are hingeable & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5) Panels should have the main incoming feeder, bus bar chamber, instrument chamber, pump feeder chamber and cable ally chamber. a) Main incoming chamber consist of one number rated TP MCCB, make Schneider/ L&T / Siemens / GE / Equivalent. b) Bus bar Chamber consisting of rated current. 415 V 50 Hz, with heat sink and rated CT, Make Kappa / AEE / Equivalent. c) Instrument Chamber consisting of digital / analogue Ammeter & Voltmeter with selector switches and phase indication lamp and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. d) Every pump feeder consisting of short circuit protection through HRC TPN Main Switch (GE/ L&T/ Siemens/ Schneider) , overload protected through thermal overload relay (GE/ Schneider/ L&T/ Siemens), Single Phasing protected by single phase preventor (Make: Minilec), star & delta contactors and star delta timer (GE/ L&T/ Schneider / Siemens), ammeter, voltmeter, selector switches, rated CT, overload indication & pump OFF-ON push button and necessary rated SP MCB, make MDS/ GE/Equal for control circuit. 6) Cable ally consisting of rated terminals (Elmex / Phonix). |
| 20 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal 4 sqmm 3.0 core |
| 21 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal 2.5 sqmm 3.0 core |
| 22 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal. 1.5 sqmm 2.0 core |
| 23 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal 1.5 sqmm 4.0 core |
| 24 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal. for speaker cable 10 sqmm 4.0 core |
| 25 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 35 sq. mm (32 mm) |
| 26 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 35 sq. mm (58 mm) |
| 27 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 16 sq. mm (22 mm) |
| 28 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. . 2 X 35 sq. mm (25 mm) |
| 29 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 50 sq. mm (28 mm) |
| 30 | SITC of Control system: Programmed control with Sunlite software and computer & UPS. (licensed software for lifetime validity to run the complete show). Proper Completion of work as per irection of E/Ic. |
| 31 | SITC of All Weather Compact 2- way Speaker (a type of loudspeaker that includes two separate drivers: a woofer for low frequencies and a tweeter for high frequencies. This configuration allows the speaker to reproduce a wider range of audio frequencies and is often used in various audio applications, including home audio systems, portable speakers, and professional sound reinforcement.) with 15” LF, system power rating 500 W(2000 W peak, nominal impedance 8 ohm, JBL AWC 159 .Proper Completion of work as per direction of E/Ic. |
| 32 | SITC of All Weather Compact subwoofer(a specialized type of subwoofer designed to deliver deep bass sound in outdoor environments while being resistant to various weather conditions. These subwoofers are commonly used in a range of applications, from residential patio systems to large outdoor events.) with 15” LF, system power rating 1000 W (2000 W peak, nominal impedance 8 ohm. JBL AWC 15 LF .Proper Completion of work as per direction of E/Ic. |
| 33 | SITC of Analog input 4 channel amplifier, 300 W per output channel, on board digital signal processor, Crown CDI 4/300 .Proper Completion of work as per direction of E/Ic. |
| 34 | SITC of 12 x 8 Signal processor with BLU Link (an audio signal processing device that utilizes BLU Link technology for high-quality digital audio distribution. This technology is commonly used in professional audio systems, particularly in installations requiring reliable, long-distance audio transmission with minimal latency.) , 12 Analog inputs – BLU 100 |
| 35 | SITC of 12 channel mixing console with 8 mic/line mono inputs, 3 stereo inputs , Nano M12 BT.Proper Completion of work as per direction of E/Ic. |
| 36 | SITC of Audio Rack, made of steel cabinet, epoxy powder coated.Proper Completion of work as per direction of E/Ic. |
| 37 | SITC of Programmed music: Programmed music of duration 15 minutes .Proper Completion of work as per direction of E/Ic. |
| 38 | Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects. |
| 39 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 40 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 41 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 42 | Installation and freight |
| 43 | SITC of columner jet, brass ball joint nozzles with gate valves. ( a fluid jet that flows in a straight line, maintaining a uniform direction and area without significant deviation or oscillation. ) , 10 mm outlet, brass construction.Proper Completion of work as per direction of E/Ic. |
| 44 | SITC of cinger jet , brass ball joint nozzles with gate valves ( a fluid jet that flows in a straight line, maintaining a uniform direction and area without significant deviation or oscillation. ) , 10 mm outlet, brass construction.Proper Completion of work as per direction of E/Ic. |
| 45 | SITC of GI manifolds & connecting pipelines, Supporting frame work with GI supporting stands (a plumbing component made from galvanized iron that distributes fluids (liquids or gases) to several outlets from a single inlet. Manifolds are used in various applications, including water supply systems, irrigation, and industrial processes.) & connecting pipelines.Proper Completion of work as per direction of E/Ic. |
| 46 | pump power-10hp(2x5hp) |
| 47 | 2x5hp Panel with outdoor enclosure |
| 48 | Led lights 21w |
| 49 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal 4 sqmm 3.0 core |
| 50 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal 2.5 sqmm 3.0 core |
| 51 | Installation and frieght charges Water Bodies for Fountain |
| 52 | Operation & Maintenance of 1st year @ 0.50% of Estimated Value 41196118.00 |
| 53 | Operation & Maintenance of 2nd year @ 1.00 % of Estimated Value 41196118 |
| 54 | Operation & Maintenance of 3rd year @ 1.25 % of Estimated Value 41196118 Please Enable Macros to View BoQ information |
