|
| 1 | Disconnecting all electrical connections from electric motor 120 HP installed at Sector 'C' and decoupling from pump assembly and dismantling from foundation and transporting to local workshop approved by Accepting Officer for opening the motor taking out of burnt winding and thorough cleaning of the slotes, rewinding the complete motor with supper enamaled copper wire of same size and provn of supper quality insulating materials, varnishing, replacing the bearing sets and cooling fans if required and drying and taking back from wksp including laths and other any type of machine work such as rotor work, welding, metalling, machining and grinding for bearing sheet etc and mounting, connecting all electrical connections alongwith reassembling pump set and testing complete all as specified & directed. Note:- Rewinding amount of motor will be paid to the contractor once only irrespective of how many number of times motor rewinded . |
| 2 | All as per Srl Item No. 1.00 here in before but 100 HP motor . |
| 3 | All as per Srl Item No. 1.00 here in before but 75 HP motor . |
| 4 | All as per Srl Item No. 1.00 here in before but 60 HP motor . |
| 5 | All as per Srl Item No. 1.00 here in before but 50 HP motor including 03 Nos vertical turbine motor . |
| 6 | All as per Srl Item No. 1.00 here in before but 40 HP motor . |
| 7 | All as per Srl Item No. 1.00 here in before but 30 HP motor . |
| 8 | All as per Srl Item No. 1.00 here in before but 25 HP motor . |
| 9 | All as per Srl Item No. 1.00 here in before but 12.5 HP motor . |
| 10 | All as per Srl Item No. 1.00 here in before but 10 HP motor . |
| 11 | All as per Srl Item No. 1.00 here in before but 10 HP sludge motor . |
| 12 | All as per Srl Item No. 1.00 here in before but 7.5 HP sludge motor . |
| 13 | All as per Srl Item No. 1.00 here in before but 5 HP motor . |
| 14 | Decoupling of centrifugal pump/Raw water turbine pump from electric motor, dismantling from the foundation and shifting to local workshop approved by Accpeting Officer for opening the pumps for checking and rectification of defects by welding/threading/cutting/replacing defective parts which shall be measured and paid separately as supply only herein after including transporting back and refixing and testing for Model No : DSM 125/40 Make: Kirloskar complete all as specified & directed. |
| 15 | All as per Srl Item No. 2.00 here in before but for Model No : DSM 100/36 Make: Kirloskar . |
| 16 | All as per Srl Item No. 2.00 here in before but for Model No : DB 125/26 Make: Kirloskar . |
| 17 | All as per Srl Item No. 2.00 here in before but for Model No : UP 80/38 Make: Kirloskar or Raw water turbine pump . |
| 18 | All as per Srl Item No. 2.00 here in before but for Model No : SCT 80/38 Make: Kirloskar . |
| 19 | All as per Srl Item No. 2.00 here in before but for Model No : SP4LA Make: Kirloskar . |
| 20 | All as per Srl Item No. 2.00 here in before but for Model No : 4/5 2STGMEDIMKI . Make: Mather Platt/Vacuum Centrifugal Pump |
| 21 | All as per Srl Item No. 2.00 here in before but for Model No : A20AVA000092 . |
| 22 | All as per Srl Item No. 2.00 here in before but motor cooling fan and its connected item. |
| 23 | All as per Srl Item No. 2.00 here in before but replacement of vent valve of pump set |
| 24 | Dismantling of upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc complete all as specified & directed. Model No : DSM 125/40 Make: Kirloskar. |
| 25 | All as per Srl Item No. 3.00 here in before but CI impeller with bush bed . |
| 26 | All as per Srl Item No. 3.00 here in before but Pump Shaft . |
| 27 | All as per Srl Item No. 3.00 here in before but Wear Ring . |
| 28 | All as per Srl Item No. 3.00 here in before but Shaft Sleeve . |
| 29 | All as per Srl Item No. 3.00 here in before but Lentern Rung, Oil seal & O Ring . |
| 30 | All as per Srl Item No. 3.00 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple, Gland packing with its studs and Hexa nuts and all its connected items. |
| 31 | All as per Srl Item No. 3.00 here in before but Impeller Key and its connected item . |
| 32 | All as per Srl Item No. 3.00 here in before but motor cooling fan and its connected item. |
| 33 | All as per Srl Item No. 3.00 here in before but replacement of vent valve of pump set . |
| 34 | Dismantling of upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc complete all as specified & directed Model No : DSM 100/36, make: Kirloskar. |
| 35 | All as per Srl Item No. 4.00 here in before but CI impeller with bush bed . |
| 36 | All as per Srl Item No. 4.00 here in before but Pump Shaft . |
| 37 | All as per Srl Item No. 4.00 here in before but Wear Ring . |
| 38 | All as per Srl Item No. 4.00 here in before but Shaft Sleeve . |
| 39 | All as per Srl Item No. 4.00 here in before but Lentern Ring, Oil seal & O Ring . |
| 40 | All as per Srl Item No. 4.00 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple, gland packing with its nuts and all its connected items. |
| 41 | All as per Srl Item No. 4.00 here in before but Impeller Key . |
| 42 | All as per Srl Item No. 4.00 here in before but motor cooling fan and its connected item. |
| 43 | Dismantling of upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc complete all as specified & directed. Model No : DSM 125/26, make: Kirloskar. |
| 44 | All as per Srl Item No. 5.00 here in before but CI impeller with bush bed . |
| 45 | All as per Srl Item No. 5.00 here in before but Pump Shaft. |
| 46 | All as per Srl Item No. 5.00 here in before but Wear Ring . |
| 47 | All as per Srl Item No. 5.00 here in before but Shaft Sleeve . |
| 48 | All as per Srl Item No. 5.00 here in before but Lentern Rung, Oil seal & O Ring . |
| 49 | All as per Srl Item No. 5.00 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple ,Gland packing with its studs and Hexa nuts and all its connected items |
| 50 | All as per Srl Item No. 5.00 here in before but Impeller Key. |
| 51 | All as per Srl Item No. 5.00 here in before but motor cooling fan and its connected item. |
| 52 | Dismantling upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : UP 80/38 complete all as specified & directed. Make: Kirloskar or Raw water turbine pump. |
| 53 | All as per Srl Item No. 6.00 here in before but CI impeller with bush bed . |
| 54 | All as per Srl Item No. 6.00 here in before but Pump Shaft . |
| 55 | All as per Srl Item No. 6.00 here in before but Wear Ring. |
| 56 | All as per Srl Item No. 6.00 here in before but Shaft Sleeve . |
| 57 | All as per Srl Item No. 6.00 here in before but Lentern Rung, Oil seal & O Ring . |
| 58 | All as per Srl Item No. 6.00 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple, Gland packing with its studs and Hexa nuts and all its connected items. |
| 59 | All as per Srl Item No. 6.00 here in before but Impeller Key and its connected item. |
| 60 | All as per Srl Item No. 6.00 here in before but collets and column . |
| 61 | All as per Srl Item No. 6.00 here in before but motor cooling fan and its connected item. |
| 62 | Dismantling of upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc complete all as specified & directed. Model No : SCT 80/38, Make: Kirloskar. |
| 63 | All as per Srl Item No. 7.00 here in before but CI impeller with bush bed . |
| 64 | All as per Srl Item No. 7.00 here in before but Pump Shaft. |
| 65 | All as per Srl Item No. 7.00 here in before but Wear Ring . |
| 66 | All as per Srl Item No. 7.00 here in before but Shaft Sleeve DE/NDE and its O Ring . |
| 67 | All as per Srl Item No. 7.00 here in before but Lentern Rung, Oil seal & O Ring . |
| 68 | All as per Srl Item No. 7.00 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple , Gland packing with its studs and Hexa nuts and all its connected items . |
| 69 | All as per Srl Item No. 7.00 here in before but Impeller Key and its connected item. |
| 70 | Dismantling of upper half & Lower half casting with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc complete all as specified & directed. Model No : SP4LA, Make: Kirloskar. |
| 71 | All as per Srl Item No. 8.00 here in before but CI impeller with bush bed . |
| 72 | All as per Srl Item No. 8.00 here in before but Pump Shaft |
| 73 | All as per Srl Item No. 8.00 here in before but Wear Ring . |
| 74 | All as per Srl Item No. 8.00 here in before but Shaft Sleeve DE/NDE and its O Ring. |
| 75 | All as per Srl Item No. 8.00 here in before but Lentern Rung, Oil seal & O Ring . |
| 76 | All as per Srl Item No. 8.00 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple , Gland packing with its studs and Hexa nuts and all its connected items . |
| 77 | All as per Srl Item No. 8.00 here in before but Impeller Key and its connected item. |
| 78 | Dismantling of upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc complete all as specified & directed. Model No : 4/5 2STGMEDIMK , Make: Kirloskar. |
| 79 | All as per Srl Item No. 9.00 here in before but CI impeller with bush bed . |
| 80 | All as per Srl Item No. 9.00 here in before but Pump Shaft . |
| 81 | All as per Srl Item No. 9.00 here in before but Wear Ring . |
| 82 | All as per Srl Item No. 9.00 here in before but Shaft Sleeve DE/NDE and its O Ring . |
| 83 | All as per Srl Item No. 9.00 here in before but Lentern Rung, Oil seal & O Ring . |
| 84 | All as per Srl Item No. 9.00 here in before but complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple , Gland packing with its studs and Hexa nuts and all its connected items . |
| 85 | All as per Srl Item No. 9.00 here in before but Impeller Key and its connected item . |
| 86 | Scraping old existing paint from Pump Set of cap. 5 to 120 HP, motor and channel including making smooth surface by filling putty and applying two coat of synthetic enamel paint of approved colour complete all as specified & directed. |
| 87 | Scraping old existing paint from pipe of any dia installation including making smooth surface by filling putty and applying two coats of synthetic enamel paint of approved blue colour incl marking of inlet/outlet etc with the help of white colour complete all as specified & directed. |
| 88 | Supply & fixing in replacement of electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 1A to 5A through CT adjustable Trip suitable for upto 120 HP motor starter complete all as specified & directed. |
| 89 | Supply & fixing in replacement of electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 63 to 100 amp through CT adjustable Trip complete all as specified & directed. |
| 90 | Supply & fixing in replacement of electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 30 to 50 amp through CT adjustable Trip complete all as specified & directed. |
| 91 | Supply & fixing in replacement of electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 20 to 25 amp through CT adjustable Trip complete all as specified & directed. |
| 92 | Supply & fixing in replacement of electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 14 to 23 amp through CT adjustable Trip complete all as specified & directed. |
| 93 | Supply & fixing in replacement of electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 13 to 21 amp through CT adjustable Trip complete all as specified & directed. |
| 94 | Supply & fixing of rubber coupling TC-13, TC-14, TC-19, TC-22 and as per existing required for centrifugal pump sets complete all as specified & directed |
| 95 | Supply and fixing of metal coupling for centrifugal pump sets suitable for existing pump sets complete all as specified & directed. |
| 96 | Repairing the LT control starter panel/AMF panel of the centrifugal pump and motor by disconnecting the cable, removing u/s parts of the panel, wiring and replacement of u/s wiring and parts under respective items including cleaning by vacuum cleaner, thimble, testing the panels on load complete all as specified & directed. |
| 97 | Supply, fixing and replacement of Power contactor 3 pole MNX 25 or MC10DN, series A1, AC3,40A, for 25HP/30HP AC rating 40 Amp, 220 V suitable for existing starter complete all as specified & directed. |
| 98 | Supply, fixing and replacement of Power contactor 3 pole, MNX A1-A2, 30 KW and 40 KW AC rating upto 80 Amp, 220 V suitable for existing starter complete all as specified & directed. |
| 99 | Supply, fixing and replacement of Power contactor 3 pole, MNX 70, 45 KW AC rating upto 80 Amp, 220 V suitable for existing starter complete all as specified & directed. |
| 100 | Supply, fixing and replacement of Power contactor 3 pole, BCH MCE15M, series A1, 75 HP AC rating upto 100 Amp, 220 V suitable for existing starter complete all as specified & directed. |
| 101 | Supply, fixing and replacement of Power contactor 3 pole, BCH MCE15M series A1, AC3,110A 120 HP AC rating upto 150 Amp, 220 V suitable for existing starter complete all as specified & directed. |
| 102 | Replacement of the unserviceable timer switch type ST 100 suitable for 240 Volts with mounting kit of capacity 3-30Sec, 50 Hz complete all as specified & directed. |
| 103 | Supply, fixing and replacement of Single phase preventor/Phase sequence corrector for upto 120 HP motor or AC rating upto 160 Amp, 415 VAC, 50 Hz (VSP2) suitable for existing starters complete all as specified & directed. |
| 104 | Supplying, laying, jointing and testing in replacement of existing size with pre-insulated multi standard copper conductor flat of size 25 sqmm, 3 core submersible cable and connected with suitable and required thimbles and nut bolts to panels complete all as specified & directed. |
| 105 | All as per Srl Item No. 28.00 here in before but 16 Sqmm, 3 core . |
| 106 | All as per Srl Item No. 28.00 here in before but 10 Sqmm 3 core . |
| 107 | All as per Srl Item No. 28.00 here in before but 6 Sqmm 3 core . |
| 108 | Rewinding of submersible motor of 20 HP capacity with super enameled insulated copper wire as per existing gauge with other winding material including cleaning of stator, slots replacement of defective components and parts including taking out and placing back complete all as specified & directed.Note : Spare parts required shall be measured and paid separately as supply only under the respective items |
| 109 | Supply only Gun metal impeller with key and distance bushes complete all as specified & directed. |
| 110 | Supply only Pump shaft of stain less steel complete all as specified & directed |
| 111 | Supply only Motor bush of gun metal upper & lower for complete all as specified & directed |
| 112 | Supply only Rotar bearing stainless steel sleeve upper & lower complete all as specified & directed |
| 113 | Supply only Coupling arrangement with key complete all as specified & directed |
| 114 | Supply only Sand guard for submersible pump set complete all as specified & directed |
| 115 | Supply only Thrust bearing assembly for submersible pump set motor cap 20 HP complete all as specified & directed |
| 116 | Supply only Lower, housing for submersible pump set complete all as specified & directed |
| 117 | Supply only Neck ring for submersible pump set complete all as specified & directed |
| 118 | Supply only Bowl bush of gun metal complete all as specified & directed |
| 119 | Material & Labour for replacement of old U/S base frame of centifugal pump set made out of angle iron of size 50x50x6mm or medium channels of size MC-100 including cutting, drilling hole or welding work required to make desired shape or existing size duly painted with one coat of primer red oxide and two coat of enamel paint complete all as specified & directed.Note: The base frame should be grouted complete in PCC foundation and should be taken necessary bearing strength before the installation of induction motor. |
| 120 | Taking down & opening booster pump for repairing, making the same functional including installation & testing, complete all as specified & directedNote : (a) Spare parts required shall be measured and paid separately as supply only under the respective items (b) Make of spare parts shall be same as of booster pump. |
| 121 | Supply only shaft bush of booster pump suitable upto 5 HP complete all as specified & directed |
| 122 | Supply only ball bearing suitable for pump upto 5 HP complete all as specified & directed |
| 123 | Supply only impeller complete all as specified & directed |
| 124 | Supply only stainless steel shaft keys complete all as specified & directed |
| 125 | Supply and fix non return value with flanged ends with nut-bolts and rubber gasket suitable for pipe of size 250 mm bore including taking out the unserviceable non return valve from the pipe complete all as specified & directed. |
| 126 | All as per Srl Item No. 46.00 here in before but 200 mm bore . |
| 127 | All as per Srl Item No. 46.00 here in before but 150 mm bore . |
| 128 | All as per Srl Item No. 46.00 here in before but 100 mm bore. |
| 129 | Material & Labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate for foundation of suitable size or as per site requirement including demolition of old PCC foundation complete all as specified & directed.Note : The debris after demolition of PCC should be removed complete and spread to area where directed by Engineer-in-Charge. |
| 130 | Supply and fixing MCCB TPN 36KA breaking capacity 500Amp, 415 V adjustable type complete all as specified & directed. |
| 131 | All as per Srl Item No. 51.00 here in before but 320 Amp . |
| 132 | All as per Srl Item No. 51.00 here in before but 250 Amp . |
| 133 | All as per Srl Item No. 51.00 here in before but 200 Amp . |
| 134 | All as per Srl Item No. 51.00 here in before but 160 Amp . |
| 135 | All as per Srl Item No. 51.00 here in before but 125 Amp . |
| 136 | All as per Srl Item No. 51.00 here in before but 100 Amp . |
| 137 | Supply, Installation, commissioning and testing automatic star Delta starter, suitable for capacity 120HP/90KW, 3 phase covered with thick sheet metal cover including all fixing arrangements on wall with nuts, bolts electrical connection and testing etc including taking down complete all as specified & directed. |
| 138 | All as per Srl Item No. 58.00 here in before but suitable for capacity 100HP/74.6KW . |
| 139 | All as per Srl Item No. 58.00 here in before but suitable for capacity 50HP/37.5KW . |
| 140 | All as per Srl Item No. 58.00 here in before but suitable for capacity 30HP/22.5KW . |
| 141 | All as per Srl Item No. 58.00 here in before but suitable for capacity 25HP/18.5KW . |
| 142 | All as per Srl Item No. 58.00 here in before but suitable for capacity 12.5HP/9.3KW . |
| 143 | Taking down the Air scour Rotary twin-lobe blower/compressor 1000cum/hr @ 4000mmWC from the foundation and shifting it to local workshop approved by Accepting Officer and filling the lub oil of Servo system 320 of IOC and ENCLO-320 of HPCL-03 ltrs and transporting back to SYL plant and refixing at the same place including connecting all electrical connections and testing complete all as specified & directed. Note:- Spare parts required shall be measured and paid separately as supply only under the respective items |
| 144 | Supply only pressure relief valve and pressure gauge complete all as specified & directed |
| 145 | Supply only suction filters complete all as specified & directed |
| 146 | Supply only suction silencer complete all as specified & directed |
| 147 | Supply only discharge silencer complete all as specified & directed |
| 148 | Supply only V belts complete all as specified & directed |
| 149 | Supply only coupling complete all as specified & directed |
| 150 | Supply only pulley complete all as specified & directed |
| 151 | Supply only anti vibration pad complete all as specified & directed |
| 152 | Supply only shaft complete all as specified & directed |
| 153 | Supply only bearings complete all as specified & directed |
| 154 | Supply only gear drive complete all as specified & directed |
| 155 | Supply only DOL starter for motor pump set upto 5HP complete all as specified & directed. Please Enable Macros to View BoQ information |
| 156 | Supply only DOL starter for motor pump set upto 5HP complete all as specified & directed. Please Enable Macros to View BoQ information |
