|
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 2 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate) |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Non SCADA Item) |
| 4 | Providing and laying in situ cement concrete M -20 with tremix treatment for 200 mm thickness forConcrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( NaturalSand /VSI grade finely washed crushed sand) etc. complete -- M30 Item Converted to M20 Item. DIfference in Costof Cement 0.40 MT - 0.35 MT = 0.05 MT at Rs 6000 is 0.05 x 6000 = Rs 300, hence Final Rate = Basic Rate for M30Item - Rs 3000 - Rs 126 for NON SCADA i.e. (8446 - 300 - 126 = 8020 Final Rate = 8020.00 |
| 5 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete |
| 6 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complet |
| 7 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diaMetre in proper line, level and slope including providing and fixing collars in cement mortar 1:2and curing etc. complete. |
| 8 | Providing and fixing board displaying information, such as 'Name of work, Tender cost,Name of Contractor, Work completion and liability period etc', having rectangular shapeof 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted withone coat of Zinc chromate stoving primer and two coats of enamel paint on front side andgrey stove enamel on back side and border / messages / symbols etc. with approved colourshade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly crossbraced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angleiron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black andwhite bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling,transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 9 | Providing and fixing cautionary / warning sign board of size 60 cm. having shape ofequilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet includingpainting with one coat of zinc cromate stoving primer and two coats each of white background, red border and backside gray stove enamelled, bonded with cut out of Retroreflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coatedwith non pealable crystal clear protective transparent coat retaining 100% reflectionincluding one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m.long inflated at bottom drilled on top in one piece without joint painted with white andblack bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nutsof size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground withcement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm.equilateral triangle M.S. sheet with Engineering grade, |
| 10 | Providing and fixing sign boards of size 90cm having shape of an equilateral trianglemade out of 14 gauge sheet with retro reflective sheeting of Engineering Grade as perM.O.T. specification No. 801-3(1993) white reflective back ground, lettering symbolbordering of black non reflective paint including M. S. angle iron back frame of size 35mm X 35 mm X 5 mm & M.S.angle one post of 50mm x 50mm x 5mm size 3.45 metrelong duly painted with white and black bands including fixing M.S. angle of the boardswith galvanised nuts and bolts and washers. The Board shall be as per IRC-67-1977including conveying fixing in ground with C.C. 1:4:8 block of size 0.60 x 0.60 x 0.75 m,with 7 year guarantee for the sheeting etc. complete. Mild Steel Board with EngineeringGrade Please Enable Macros to View BoQ information |
