|
| 1 | SUBWORK NO 2 :- PUMPING MACHINERY Item No.1Providing erecting and giving test of Submersible Pumpsets conforming to is 8034 and motor conforming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene impeller. Motor suitable for working on 415 V + 10% .3 Ph., 50 Hz. A.C. supply Cable guard, thrust carbon/fibre beaning to accept entire hydraulic thrust, waterproof winding shall be Provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design antithrust stream lined non return valve shall be Provided with the pum. Suitable suction strainer shall also be provided. 3 core single / double run copper conductor submersuble type flat cable 3m and 2 pairs of erection clamps shall be provided along with the pump rates per pump upto 20 stages are as below.\\"Submersible Pump 150 mm dia (with Bronze /Stainless steel(CF8M) Impeller) up to 12 stages\\"7.50 B.H.P. |
| 2 | Item No. 2\\"Supplying and erecting Fully Automatic Star Deltastarter to operate squirrel cage induction motorworking on 380- 440 Volt, 3 phase, 50 Hz with novolt coil, over load element, and ON - OFF pushbuttons, with necessary material and connected tosupply, etc complete. Starter with original sheet steelencloser.\\"I.G.-4 with contractor rating 16 amp.7.50 B.H.P. |
| 3 | Item No. 3Supplying, erecting & terminating XLPE armoured cable 3 core 4sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG)G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CUCB 1-3 core 6 sq mm |
| 4 | Item No. 4Providing and fixing of steel clamp fabricated from M.S. flat 65 mm x 6 mm 1 m length including nut bolts and washers.M.S. Clamp. |
| 5 | Item No. 5\\"Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. completeas per IS-1239/2004.\\"80 mm dia. G.I. Heavy Class. |
| 6 | 50 mm dia. G.I. Heavy Class FOR TW. |
| 7 | Item No. 6Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge50 mm dia. G.I. Heavy Class FOR TW. |
| 8 | Item No. 7Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984Sluice valve 80 mm dia. |
| 9 | Non Return valve - 80 mm dia. |
| 10 | Item No. 8Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Sluice valve 80 mm dia. |
| 11 | Non Return valve - 80 mm dia. |
| 12 | Item No. 9Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB32 A/40-4Pole, 3 Phase. |
| 13 | Item No.10Supplying and erecting cupboard for enclosing switchgears or for any other purpose made from selected marine plywood planks 19 mm thick duly varnished/ painted from inside and from outside with brass hinges and locking arrangement with suitable lock with keys in duplicate. Cupboard shall be duly grouted with suitable size of iron work in wall at the bottom. (Size of cupboard shall be specified in the estimate) |
| 14 | Item No.11L.T. current transformer with wound/bar primary 10/5 Amp, ratio with 15 VA burden erected in provided M.S. box duly secured with inslulting materials and connected to the meter.L.T. Transformer |
| 15 | Item No. 12Providing and erecting main switch or ISI mark - Amp. |
| 16 | Item No. 13Providing and fixing frame work for pannel board near well with ISMC 100x50 and ISA 35x35x6 mm etc.complete.M.S.Frame pannel board |
| 17 | Item No. 14Supplying and erecting PVC pipe \\"B\\" class 25 mm to 40 mm for eneclosing PVC cable. PVC cable. |
| 18 | Item No. 15Supplying and erecting galvanised cast iron earth plate 60x60x0.6 cm buried in specifically prepared earth pit 1:5 m below ground level with 30 kg Charcoal and Salt in alternatre layers necessary length of double G.I. Earth wire 8 SWG connected to plate with cadmijm plate G.I. nut bolts 12 mm dia. with bituminous compound and run through 12 mm dia .G.I. pipe 3 m long remaining portion of G.I. wire from surface of earth to switch gear in PVC ippe upto accessible height duly sealed at both ends by bituminous compound complete connected to the nearest switch gear with end socket as per direction and duly tested by earth tester and recording the results. Earth Plate. |
| 19 | Item no 16Supplying and erecting 'B' class G.I. Bend in position with necessary material. PW1-4 80 mm dia G.I. Bend |
| 20 | PW 2-4 G.I. Tee 80 mm dia. |
| 21 | Item No. 17Making trenches of suitable width and 0.7 m deep and laying provided L.T. cable and refilling the same with screened sand bed of 0.2 m thick to embedded the cable and bricks placed on both sides length wise and top width wise all over the run and refilling the excavated earth without shone or hard material and making the surface proper with 0.15 m crown on the top. Trench……….. |
| 22 | Item No. 18Providing and errecting voltmeter A.C. 50 Cycles / Sec. With 0 to 500 v. range flush type errected on provided M.S. 60 and errected with necesssary PVC wire Voltmeter 144 x 144 Sq. mm. |
| 23 | Item No. 19Providing and errecting ammeter A.C. 50 0/5 450 v. or suitable range flush type complete errected in provided M.S. box connected to supply .Ammeter 96 x 96 Sqmm. |
| 24 | Item no 20Supplying and errecting set of 3 pilot lamp all back light with colour glasses with monitor lamp 230 volt / 250 volt errected on provided M.S. box with pannel type fuses and connected with PVC wire. |
| 25 | Item No. 21Supplying and errecting triple pole Iron clad/metal clad switch and fuse 415/500 v. of suitable rating as below or approved make errected on original frame.I)Incoming ICTPN-32 Amp/ |
| 26 | ii)out going ICTP-16 Amp. |
| 27 | iii)For lighting ICDP-16 Amp. |
| 28 | Item No. 22Providing and fixing M.S.E.B.kitkat set etc. complete |
| 29 | Item No. 23Operation of Pumping Machinary through mobile network system |
| 30 | SUBWORK NO 3 :- SWITCH CONTROLL ROOM (SIZE 3.00 x 3.00 x 3.00 M.) ITEM NO. 1 :- Excavation for foundation / pipe trenches in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding back filling, etc. complete.For Column |
| 31 | Item No. 2 :- Providing dry rubble stone soling 15 cm / 30 cm thick including hand packing finishing compaction etc. complete. |
| 32 | ITEM NO. 3 :- Providing & laying in situ cement concrete M-15 (1:2:4) with trap/granite/quartizite/ gneiss metal in face wall including plywood / steel formwork and steel centering, compaction by vibrator, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface, filling joints with bitumen, curing etc, complete. ( exculuding cost of reinforcement) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunney bag, plastic, tarpaulin etc. ( Wooden centering/ formwork will not be allowed)Bedding ( M - 15) |
| 33 | ITEM NO. 4 :- Providing and casting in situ C.C. of M - 20 trap/ granite/ quartzite / gneiss metal of approved quality for RCC work in foundation and footing of RCC column steel sanchion including normal dewatering, centring, form work compaction, finishing and curring etc. complete. (excluding M.S., or Tor reinforcement)R.C.C. M-20 Grade for footing |
| 34 | ITEM NO. 5 :- Providing and casting in situ M - 20 C.C. of trap/ granite/ quartzite / gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, formwork, compaction finishing the formed surface with C.M. 1:3 of sufficient mimimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curring, etc. complete. (By weigh betching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted (excluding M.S., or Tor reinforcement)Column |
| 35 | ITEM NO. 6 :- Providing and casting in situ M - 20 C.C. of trap/ granite/ quartzite / gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, formwork, compaction finishing the formed surface with C.M. 1:3 of sufficient mimimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curring, etc. complete. (By weigh betching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted (excluding M.S., or Tor reinforcement)Beam |
| 36 | ITEM NO. 7 :- Providing and casting in situ M - 20 C.C. of trap/ granite/ quartzite / gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, formwork, compaction finishing the formed surface with C.M. 1:3 of sufficient mimimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curring, etc. complete. (By weigh betching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted (excluding M.S., or Tor reinforcement)Chajja |
| 37 | ITEM NO. 8 :- Providing and casting in situ M - 20 C.C. of trap/ granite/ quartzite / gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, formwork, compaction finishing the formed surface with C.M. 1:3 of sufficient mimimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curring, etc. complete. (By weigh betching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted (excluding M.S., or Tor reinforcement)Top Slab |
| 38 | ITEM NO. 9 :- Providing & Fixing in position Steel bar reinforcement of various diameters for RCC pipes caps footing foundations slabs beams, columns, canopies stair cases, newels, chajjas lintels pardies copings, fins, arches, etc, as per detailed design, drawings, and schedules including cutting, bending, hoking the bars binding with wires or tack welding and supporting as required etc. complete. |
| 39 | ITEM NO. 10 :- Providing II nd class burnt bricks masonery with conuentional IS type brick in cement mortor 1:6 including scaffolding racking out joints and watering in superstructure etc. complete. |
| 40 | \\"ITEM NO. 11 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.\\" |
| 41 | ITEM NO. 12 :- Providing and laying cement conrete flooring 40 mm thick 1:2:4 cement concrete laid to proper level and slope in alternate bays including compcting PVC/Glass/ Aluminium strip at joint marking lines to give appearance to tiles at 3cm x 30 cm or other sizes laid diagonally / square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete.Flooring |
| 42 | ITEM NO. 13 :- Providing and fixing steel windows of various sizes as per detailed drawing with welded square bars 12mm at in 10cm centre to center with out ho dip zinc coating without / with ventilators including baricating glazing with non - acetinic / plain / obscued glass panned at approved type and quantity all fixluces and bastening without teak wood, boxing and architravesand finishing with one coat of primer complete and 2 coats of oil paint etc. complete. Steel Window |
| 43 | \\"ITEM NO. 14 :- Providing and fixing factory made panelled door shutter in single leaf 35 mm thick style and rail without ventilator with CCTW panels 12 mm thick including wrought iron hold fast and stainless steel fixtures withoil painting 3 coats etc. complete.\\" |
| 44 | ITEM NO. 15 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete |
| 45 | ITEM NO. 16 :- Filling in plinth and floors / trenches with available excavated stuff for bedding in 15 cm layer including watering and compaction etc. complete. |
| 46 | ITEM NO. 17 :- Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete |
| 47 | ITEM NO. 18 :- Providing and fixing chicken mesh of 22 guage with about 30 cm width at the junction of RCC members and bricks work of approved including fixing mesh in position by necessary drilling in concrete or / B.B. masonery and or tying by binding wire etc. complete. |
| 48 | ITEM NO. 19 :- Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layer including watering and compaction etc. complete. |
| 49 | ITEM NO. 20 :- Electrification to switch control room including electric fitting with tube rod and other miscellanous items.Electrification |
| 50 | SUBWORK NO 4 :- RISING MAIN 90 MM Dia HDPE. 6 kg/Sqcm. Length=1120 M Item No. 1Excavation for pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Total |
| 51 | Item No. 2Excavation for pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Total |
| 52 | Item No. 3Excavation for foundation/ pipe trenches in soft rock and old cement & lime masonry foundation, asphalt road including removing the excavated material upto a distance of 50 meters beyond the area & lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation excluding backfilling etc. complete. |
| 53 | Item No. 4Excavation for pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. |
| 54 | Item No. 5\\"Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread /insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges,conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GSTlevied by GI & GOM in all respect etc. complete.\\"90 mm 6 kg/Sqcm HDPE |
| 55 | Item No. 6\\"Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent ISCode complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II\\"90 mm 6 kg/Sqcm HDPE |
| 56 | Item No. 7Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)80 mm dia. Score valve. PN-1.6 with out byepass arrangement |
| 57 | Item No. 8Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete50 mm Dia Air Valve Double Ball Flanged Type - PN -1 |
| 58 | Item No. 9Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).50 mm Dia Air Valve Double Ball Flanged Type - PN -1 |
| 59 | Item No. 10Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.,80 mm dia. Sluice valve P.No. -1.6 |
| 60 | Item No. 11Lowering, laying and jointing in position following C.I.DIF Reflex valves,and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)i) 80 mm dia. Sluice valve. |
| 61 | ii) 80 mm dia. Score valve. |
| 62 | Item No. 12Providing and lyaing in situ, following grades of P.C.C. (M-150) of trap/granite/ quartzite/ gneiss metal for foundation and bedding including normal dewatering, formwork, compacting and curing, finishing, etc. complete. |
| 63 | Item No. 13Providing and fixing in position air valve shaft Including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M- 150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.)Upto 150 mm Dia |
| 64 | Item No. 14Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masomy in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.Size 90 x 45 cm |
| 65 | Item No. 15Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 66 | Item No. 16\\"Hydraulic testing of H. D. P. E./ M. D. P. E.pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour,operation charges, etc. required for testing. The rate under this item shall also include cost ofretesting, if necessary and reinstating to original position..\\"90 mm PVC. Pipe |
| 67 | SUBWORK NO 5 :- Construction of R.C.C. E.S.R.'s capacity 20000 Litr Item No. 1Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for ESR having Capacity upto 500 Cum. and not more than 6 m c/c for ESRs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder out side, stainless steel Ladder in container, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staire case from ground level to roof level,M.S.grill gate of 2 mtr.height with locking arrangement of approved design. B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of Acrylie emulsion with silicon additives paint to the structure including roof slab epoxy painting to internal surface & anti termite treatment for underground parts of the structure. and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge.Capacity 20000 litres, St. Ht.12 m. |
| 68 | Item No. 2Providing and supplying ISI standard welded CI/DF double flanged pipe including GST levied by GOI & GOM in all respect but including railway freight, insurance, unloading from railway wagon, loading into truck transport to store, unloading, stacking etc. complete as directed by Engineer -in- charge. (for 2.75 m bare pipe80 mm dia inlet pipe |
| 69 | 100 mm dia outlet pipe |
| 70 | 80 mm dia overflow pipe |
| 71 | Item No. 3Providing double flange sluice valve confirming for IS- 2906/14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking 80 mm dia PN 1 |
| 72 | 100 mm dia PN 1 |
| 73 | 80 mm dia PN 1 |
| 74 | Item No. 4Providing and supplying ISI standard DI. specials & fitting with sealing rubber gasket of S.B.R,complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour, materials, and transportation to stores, loading and unloading including GST levied by GOI & GOM in all respect etc. complete as per IS-9523.80 to 300 mm dia |
| 75 | Item No. 5Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. completeDeduct For MS Gate(3m x 1.6m )Total |
| 76 | Item No. 6Providing and fixing M.S. gate 2.5 M wide for compound with 40 mm dia G.I. pipe, approved grill work, RCC M-150 side pillars of 25 cm x 40 cm x 2.5 M height, its foundation, finishing, painting, etc.complete |
| 77 | Item No. 7Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 78 | SUBWORK NO 6 :- DISTRIBUTION SYSTEM of 75 mm ,Total Length is 1710 m. Item No. 1 :Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M for 75 mm dia PVC 4 kg per sqcmfor 90 mm dia PVC 4 kg per sqcmfor 110 mm dia PVC 4 kg per sqcm |
| 79 | Item No. 2 :Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M for 75 mm dia PVC 4 kg per sqcmfor 90 mm dia PVC 4 kg per sqcmfor 110 mm dia PVC 4 kg per sqcm |
| 80 | Item No. 4 :Excavation for foundation / pipe trenches in hard rock by chiselling, wedging, line drilling by any other mechanical means other rthan blasting including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. Lift 0 to 1.5 Mfor 75 mm dia PVC 4 kg per sqcmfor 90 mm dia PVC 4 kg per sqcmfor 110 mm dia PVC 4 kg per sqcm |
| 81 | Item No. 6 :Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).for 75 mm dia PVC 4 kg per sqcm |
| 82 | for 90 mm dia PVC 4 kg per sqcm |
| 83 | for 110 mm dia PVC 4 kg per sqcm |
| 84 | Item No. 7:Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring,as perIS code,etc. complete (with cement solvent joint / ring fit joint). for 75 mm dia PVC 4 kg per sqcm |
| 85 | for 90 mm dia PVC 4 kg per sqcm |
| 86 | for 110 mm dia PVC 4 kg per sqcm |
| 87 | Item No. 8 :Providing PVC specials @10% cost of pipe |
| 88 | Item No. 9 :Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve PN-165 mm dia |
| 89 | 80 mm dia |
| 90 | Item No. 10 :Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.)Sluice Valve PN-1.665 mm dia |
| 91 | 80 mm dia |
| 92 | Item No. 11 :Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing,etc.complete.. WT 40 KG |
| 93 | Item No. 12 :Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.Total Pipe Volume to be deducted |
| 94 | Item No. 13 :Providing and lyaing in situ, following grades of P.C.C. (M-150) of trap/granite/ quartzite/ gneiss metal for foundation and bedding including normal dewatering, formwork, compacting and curing, finishing, etc. complete. |
| 95 | Item No. 14 :Hydraulic testing of PVC. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. for 75 mm dia PVC 4 kg per sqcm |
| 96 | for 90 mm dia PVC 4 kg per sqcm |
| 97 | for 110 mm dia PVC 4 kg per sqcm |
| 98 | Item No.15 :Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. |
| 99 | Item No 16 :Providing & making solid support for FHTC ( Functional Household Tap Connection ) withc.c stand in c.c 1:3:6 mix base platform size 1.10m x 0.95 m + width 0.20m + depth below gl 0.10 x 0.20 deep wailing with 110 mm dia x 0.65m+deep stand in c.c 1:3:6 as per drawing including centering, curring, finishing etc. Completed painting in oil paint in various colours as per directed by engineer incharge. |
| 100 | SUBWORK NO 7 :- CATTLE TROUGH QTY FOR 2 NOS ITEM NO :1Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) Excavation for cattle trough |
| 101 | Excavation for connecting pipe |
| 102 | ITEM NO :2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) |
| 103 | ITEM NO : 3Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) |
| 104 | ITEM NO:4Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)PCC M-150 |
| 105 | ITEM NO :5Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work,bully/steel propups propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree etc. cement is permitted.) (excluding M.S. or Tor reinforcement) |
| 106 | ITEM NO. 6Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)In RCC M-150Long Wall for cattle trough |
| 107 | Long Wall |
| 108 | Cross Wall |
| 109 | Guard Ward to cattle trough platform |
| 110 | Cross Guard Wall |
| 111 | Back Guard Wall |
| 112 | ITEM NO.7Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F- 17/306) b) To r Steelb) Tor Steel |
| 113 | ITEM NO:8Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality 3assurance certificate from quality agencies like WRC / CIPET (India) / DVGM / KIWA / SPGN etc. for usage in Drinking Water system. The cost shall include testing of all materials, Inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete as specified and directed.32mm dia MDPE Pipe for water supply to cattle trough |
| 114 | ITEM NO.9Providing, lowering, laying MDPE specials Including tap connection etc. complete as directed. Specials required for making connctions and fittings including tap, drainage arrangement |
| 115 | SUBWORK NO 8 :- FHTC Item No. 1Item No. 1 :Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour, UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed )Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap,GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing,including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc.complete as directed by Engineer in Charge.A) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul) for HDPE & PVC pipe For MDPE/UPVC Pipe Service Connection on Disribution main(As per Rate Analysis)No of households connections provided A) (With Road Crossing) For 15 mm Service connection |
| 116 | B) (Without Road Crossing) For 15 mm Service connection Please Enable Macros to View BoQ information |
