Tender For Maintenance Of Electrical Installation In Non-Residential Building At Chandigarh (Replacement Of Defective Flood Lights & Other Electrical Accessories In The Garden Of Spring, Sector-53, Chandigarh)., Chandigarh-Chandigarh
TDR : 55122373
Tender Notice
BOQ
9 Days Left
Chandigarh
Chandigarh
Tender For Maintenance Of Electrical Installation In Non-Residential Building At Chandigarh (Replacement Of Defective Flood Lights & Other Electrical Accessories In The Garden Of Spring, Sector-53, Chandigarh).
Name of Work:- MAINTENANCE OF ELECTRICAL INSTALLATION IN NON-RESIDENTIAL BUILDING AT CHANDIGARH (REPLACEMENT OF DEFECTIVE FLOOD LIGHTS & OTHER ELECTRICAL ACCESSORIES IN THE GARDEN OF SPRING, SECTOR-53, CHANDIGARH).
Sl. No.
Item Description
1
DSR item No. 1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
2
6 x 2.5 sq. mm
3
DSR item No. 8.16 LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt). (Please refer DNIT for complete specification of item no.02)
4
250 watt
5
DSR item No. 7.4 Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.
6
3 output(1output per phase) and suitable for three phase supply
7
DSR item No. 11.4 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
8
4 X 16 sq. mm
9
DSR item No. 15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
10
63 mm dia (OD-63 mm & ID-51 mm nominal)
11
Supply, Erection, Testing and commissioning of the following items in existing LED fittings (Street light / flood light/ Post top lantern fitting) installed on wall/ existing pole upto 16 Mtr. Long in place of burnt out / defective material with the help of hydraulic ladder / Crain with bucket which shall be arranged by the firm at his own cost. The job includes cost of making connection with suitable rating copper wire and petty material required to complete the job to the entire satisfaction of Engineer-in-charge. The job also includes the cost of dismantling the burnt out / defective material.
12
S/E of Electronic Driver suitable for existing 150 watt LED fitting. The Driver should be same make of existing fitting i.e. Philips /Wipro /Bajaj / Havells /Crompton /Surya / Jaquar/ Lighting Technologies/ Trilux/ Panasonic make only.
13
Locating of fault of LT / HT cables laid in underground with the help of fault locating machine. It includes the cost of arrangement of power supply / generator required during the fault locating & digging the earth after found fault location & draw out the faulty cable from the ground and re-install the same after fault removal. The job also includes the cost of other petty materials required to complete the job to the entire satisfaction of Engineer-in-charge.
14
Supply and laying of XLPE insulated PVC sheathed Aluminum conductor armoured cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing Trench/Ducts/Cable Tray/ RCC/ HUME/ METAL/ DWC pipe / on surface with the help of MS clamps of suitable size/ as required at site to the entire satisfaction of Engineer-in-Charge. The job includes labour charges of laying the cable and making connections with suitable size aluminum lugs/thimbles etc. The cable shall be of Polycab / Havells / R.R. Kabel/ KEI/ Finolex make only.
15
16 sq. mm 4 core Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
