|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER CHILKA, INS CHILKA, KHURDA, ODISHA - 752 037 NAME OF WORK : SPECIAL REPAIR OF E/M INSTALLATION AT INS CHILKA & PROVISION OF DEFICIENT PARKING SHED NEAR OFFICER'S MESS AT INS CHILKA Contract No : GE/CHL/8188 OF 2025-26 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil etc all complete. |
| 3 | M&L for Hardcore of gauge n exc. 63mm, with broken stone and boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surfaces etc all complete. |
| 4 | M&L for 150mm Plain Cement Concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement etc all complete. |
| 5 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'B' complete etc all as specified & directed. |
| 6 | Removing excavated soils exceeding 250m but not exceeding 500 and depositing where directed by E-in-Charge. |
| 7 | Dismantling wrought iron or mild steel work of any Description not otherwise provided for complete all as specified and as directed. |
| 8 | Demolition of brick works or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works and precast concrete article complete all as specified and as directed. |
| 9 | Dismantling of post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground post embedded in Concrete, brick work, masonry, etc. all as directed by Engr-in-Charge. |
| 10 | S&F Joist, channel, angle,MS Flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-410 Gde E-250 all as specified and as directed |
| 11 | S & F Framed work as in doors or gates of angle or other section conforming to Fe 410 -W (GdeE- 250) qualityA with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 12 | M&L for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed. |
| 13 | M&L for walling of random rubble masonry (Except Stone), uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. Note:- Serviceable stone obtained from demolition shall be reused under this item. The rate quoted under this item is inclusive of cleaning of stone for reusing as required. |
| 14 | M&L Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 15 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) |
| 16 | Excavating in trenches n.exc. 1.50m wide and n.exc. 1.50m in depth for foundation etc and getting out in soft/loose soil. |
| 17 | Demolition of RCC of any description , any thickness and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 18 | M&L for RCC type B1 1:2:4 using 20mm graded stone aggregate as in Foundations, including rafts, footing foundation beams plinth beams ; bases for coumns, etc basement slabs under reamed piles and mass concrete complete all as specified and as directed. |
| 19 | M&L for RCC , type B1 1:2:4 using 20mm graded stone aggregate as Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 20 | Formwork to rough finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits if any of foundation and plinth beams and similar works vertical or to batter of flat rough finished. |
| 21 | Formwork to rough finished surfaces of concrete to sides of pillars , posts, struts, piers, columns and stanchions of square, rectangular or polygonal of rough finished |
| 22 | S&F mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooking ends and binding with and including mild steel with (annealed) not less than 0.9mm dia. |
| 23 | Ditto all as per above items but 6mm to 8mm dia etc complete all as specified and directed. |
| 24 | Ditto all as per item No here-in-above but 5mm dia and over upto and including 10 mm dia in stirrups, spaces, binders nibs etc complete all as specified and directed. |
| 25 | M&L for RCC for Providing precast ce- ment concrete in CM 1:6 type B1 1:2:4 (20mm graded aggregate) win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed. |
| 26 | Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site complete all as specified and as directed. |
| 27 | Material and labour for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed. |
| 28 | S&F Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors Pattern, size and shade pointed with grey cement and pigment fixed over and including 15mm thick cm in 1:6 etc all as specified and as directed |
| 29 | S&F in repair for galvaniseed. 2 strand , steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and stranding and fixing to any type of slandered rails straining bolts, including, securing or tying at crossing with clips complete as specified and directed. |
| 30 | Taking down plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc (incluidng tiles racking out joint hacking for key scrubbning down with water etc incl patches of any size complete all as specified and as directed. |
| 31 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces finished even and smooth (without using extra cement)complete all as specified and as directed |
| 32 | M&L for preparation of newly plastered or unplastered surfaces of wall or concrete surface and applying two coat cement base paint over priming plastered and other surfaces with alkali resistant priming paint complete all as specifed and as directed. |
| 33 | M&L for preparing painting on steel surfaces of any description over 10cm in width or girth, on new surface over a coat of red oxide zin primer and two coat of synthetic enameled paint over it all as specified and directed. |
| 34 | M&L for complete removal of existing treatment of old decorated surfaces of wall surface applying two coat of exterior weather coat anti dust emulsion paint exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction , complete all as specified and directed. |
| 35 | M&L for preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 36 | M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint etc all as specified & directed. |
| 37 | M & L for preparing old distempered surfaces of walls by washing rubbing down and stopping and applying one coat of distemper oil emulsion of any colour all as specified and as directed |
| 38 | M & L for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, and applying one coat of white wash on ceiling complete all as specified and directed. |
| 39 | Returnig filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm of soft/loose soil |
| 40 | Removing excavating surplus soil, n.exc. 50.0 m and depositing where directed at a level n.exc. 1.50m above the starting point. |
| 41 | M&L for cutting the existing road / PCC / drain for taking out / laying of underground cable including necessary earthwork excavation and making good to match with the exisitng surface complete all as specified and with PCC 1:3:6 type C1 by (using 20 mm graded stone aggregate) 100mm thick complete all as specified and directed. |
| 42 | Material and Labour HDPE pipe of 63/50(OD/ID) mm dia, double wall corrugated,cut to Size all as required at Size including fixing arrangements and providing appropriate Size insulators to insulate pipe from foundation or air termination from pipe. |
| 43 | Material and Labour HDPE pipe of 90/76 (OD/ID) mm dia, double wall corrugated,cut to Size all as required at Size including fixing arrangements and providing appropriate Size insulators to insulate pipe from foundation or air termination from pipe. |
| 44 | Material and Labour HDPE pipe of 110/96 (OD/ID) mm dia, double wall corrugated,cut to Size all as required at Size including fixing arrangements and providing appropriate Size insulators to insulate pipe from foundation or air termination from pipe. |
| 45 | Material and Labour HDPE pipe of 160/136 (OD/ID) mm dia, double wall corrugated,cut to Size all as required at Size including fixing arrangements and providing appropriate Size insulators to insulate pipe from foundation or air termination from pipe. |
| 46 | Taking up/down existing cable of sizes 2/3/3.5/4 core 10 to 70sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station complete all as specified and as directed. |
| 47 | All as per above item No. 9 but 95 to 240 sqmm complete all as specified and as directed. |
| 48 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 16 sqmm 4 core etc complete all as specified and as directed. |
| 49 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 25 sqmm 4 core etc complete all as specified and as directed. |
| 50 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 35 sqmm 4 core etc complete all as specified and as directed. |
| 51 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 50 sqmm 3.5 core etc complete all as specified and as directed. |
| 52 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 70 sqmm 3.5 core etc complete all as specified and as directed. |
| 53 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 95 sqmm 3.5 core etc complete all as specified and as directed. |
| 54 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 120 sqmm 3.5 core etc complete all as specified and as directed. |
| 55 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 185 sqmm 3.5 core etc complete all as specified and as directed. |
| 56 | Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area including cable lugs, glands, insulation tape 240 sqmm 3.5 core etc complete all as specified and as directed. |
| 57 | M&L for straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 10 - 16 sqmm 3.5/4 core cables including testing complete all as specified and as directed. Make :- Densons / 3M / Raychem |
| 58 | M&L for straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 25 - 50 sqmm 3.5/4 core cables including testing complete all as specified and as directed. Make :- Densons / 3M / Raychem |
| 59 | M&L for straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 70 - 120 sqmm 3.5/4 core cables including testing complete all as specified and as directed. Make :- Densons / 3M / Raychem |
| 60 | M&L for straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 150 - 185 sqmm 3.5/4 core cables including testing complete all as specified and as directed. Make :- Densons / 3M / Raychem |
| 61 | M&L for straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 240- 300 sqmm 3.5/4 core cables including testing complete all as specified and as directed. Make :- Densons / 3M / Raychem |
| 62 | S&F in replacement for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 32x6mm GI strip as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 40 mm GI pipe (Medium grade) for protection of earth strip and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge |
| 63 | M&L for painting of LT panel by spraying two coats of Synthetic enammled paint of ivory colour over a coat of red oxide primer after cleaning of rusty panel surface of both inside/ outside by emery paper and necesary preparation of old steel surface complete all as specified and as directed. |
| 64 | S&F test point terminal block made of gun metal or phosphorus bronze size 75 mm x 75mm x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screen complete all as specified and directed. |
| 65 | S&F in replacement Earth continuity conductor or main earthing lead fixed to wall on batten or recess or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip complete all as specified and directed. |
| 66 | M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) kerbs etc including necessary formwork, concrete exposed surface shall be finished even and fair without using extra cement complete all as specified and directed. |
| 67 | M&L for structural steel work such as beams, angles, channels, flats etc., bent to shape and MS sheet for chamber/Trench covers including cutting,welding ,nuts, bolts and necessary including dismantling complete all as directed. |
| 68 | S&F glow sign board of white polished transparent acrylic cover of minimum 2mm thick, unbreakable,imported, Weather proof, heat resistive etc including M&L of stainless steel fabrication of angles of size 30 x 30 x 3 mm and supports of thickness not less than 3mm thick, rectangular box type of size minimum 90cm x 60cm x 15cm , computerised letter of blue colour of size as per site requirement having glue on backside to stick permanently, including all kind of securing, welding, assembling with proper allignment and height with fine look, including PCC, cement work, excavation if required, LED tube light fittings 1x 10Watt(2 NOS), connecting light point 1.5 sqmm suitable for exposing at all weathers including taking down of old UNSV sign board etc complete all as specified and as directed by Engineer-in-Charge. |
| 69 | M&L for preparation of old painted steel surfaces of substation door/pipes/ panels/MS Cover plate by scrapping old rusted paint by steel brush, cleaning and applying one coats of Synthetic enamel paint of approved colour etc complete all as specified and as directed. |
| 70 | M & L for filling of clean dry coarse sand all-round the transformer platform and cable duct after cleaning grass/small bushes, etc. including removal of old dirty sand complete all as specified and directed. |
| 71 | M & L in replacement for filling of new gravels of size 40 to 60mm all-round the transformer platform over sand filling complete all as specified and directed.[Note:- Sand filling shall be measured & paid separately here-in-before.] |
| 72 | Labour only for filling of old gravels of size 40 to 60mm all-round the transformer platform after taking out and cleaning the old gravels with water and removing the mud and external foreign partical all as specified and directed.[Note:- Sand filling shall be measured & paid separately here-in-before.] |
| 73 | Supply and fixing MS Chequered Plate of 6mm thickness, high quality high tenasil strength material SS304, for Covring Cable Duct of substation including cutting/welding as per duct complete all as specified and directed. Make: Tata/Jindal/Sail |
| 74 | M&L for vegetation/wild grass/bushes clearance in E/M installation area, around feeder pillar boxes, along the UG cables, street light/LT poles for prventive maintenance/break down attendance complete all as specified and directed. Note: (a) The contractor should provide sufficient manpower and machinery as required for immediate preventive/ breakdown services. (b) The contractor should provide all safety gears like helmet, gum boots/ apron etc and safety of the workmen will be responsibility of contractor. |
| 75 | Supply , installation, testing and commissioning in replacement of outdoor LT feeder pillar box panel board double door (1200 mm x1500mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 600 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with microprocessor release, 400 Amps with breaking capacity 36 KA 1 Nos (INCOMMING) OUT GOING(a) MCCB 4 Pole, 415 V, with adjustable type, 200 Amps with breaking capacity 36 KA 1 Nos (b) MCCB 4 Pole, 415 V, with adjustable type, 250 Amps with breaking capacity 36 KA 1 Nos (c) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA (d) MCCB 4 Pole, 415 V, Adjustable type,125 Amps with breaking capacity 16 KA 1 Nos (e) 09 Nos LED indication lamp |
| 76 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (1000 mm x1000mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 400 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with adjustable type, 250 Amps with breaking capacity 36 KA 1 Nos OUT GOING(a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 1 Nos (b) MCCB 4 Pole, 415 V, Adjustable type,125 Amps with breaking capacity 16 KA 2 Nos (c) 09 Nos LED indication lamp |
| 77 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (1500 mm x1800mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 600 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with microprocessor release, 400 Amps with breaking capacity 36 KA 1 Nos OUT GOING (a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 5 Nos (b) MCCB 4 Pole, 415 V, Adjustable type,63 Amps with breaking capacity 16 KA 3 Nos (c) 09 Nos LED indication lamp |
| 78 | Supply , installation, testing and commissioning in replacemnt of indoor LT feeder pillar box panel board (1500 mm x2000mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 600 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with microprocessor release, 400 Amps with breaking capacity 36 KA 1 Nos OUT GOING (a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 5 Nos (b) MCCB 4 Pole, 415 V, Adjustable type,63 Amps with breaking capacity 16 KA 3 Nos (c) 09 Nos LED indication lamp |
| 79 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (1200 mm x1000mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 400 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with adjustable type, 250 Amps with breaking capacity 36 KA 1 Nos OUT GOING(a) MCCB 4 Pole, 415 V, Adjustable type, 100Amps with breaking capacity 16 KA 2 Nos (b) MCCB 4 Pole, 415 V, Adjustable type,125Amps with breaking capacity 16 KA 1 Nos (c) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA 3 Nos (d) 09 Nos LED indication lamp |
| 80 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (1200 mm x1500mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 600 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with microprocessor release, 400Amps with breaking capacity 36 KA 1 Nos OUT GOING(a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 1 Nos (b) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA 2 Nos (c) MCCB 4 Pole, 415 V, with adjustable type, 350 Amps with breaking capacity 36 KA 1 Nos (d) 09 Nos LED indication lamp |
| 81 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (1200 mm x1500mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 600 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with microprocessor release, 400Amps with breaking capacity 36 KA 1 Nos OUT GOING(a) MCCB 4 Pole, 415 V, with adjustable type, 200 Amps with breaking capacity 36 KA 1 Nos (b) MCCB 4 Pole, 415 V, with adjustable type, 250 Amps with breaking capacity 36 KA 1 Nos (c) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 1 Nos (d) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA 2 Nos (e) 09 Nos LED indication lamp |
| 82 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (2000 mm x1500mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 600 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) MCCB 4 Pole, 415 V, with microprocessor release, 400Amps with breaking capacity 36 KA 1 Nos OUT GOING(a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 4 Nos (b) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA 5 Nos (c) 09 Nos LED indication lamp |
| 83 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (2000 mm x2200mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 1600 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (b) 1000 Amps ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Fixed type) OUT GOING(a)MCCB 4 Pole, 415 V, with microprocessor release, 400/320 Amps with breaking capacity 36 KA 2 Nos (b) MCCB 4 Pole, 415 V, with adjustable type, 200 Amps with breaking capacity 36 KA 4 Nos (c) MCCB 4 Pole, 415 V, with adjustable type, 250 Amps with breaking capacity 36 KA 2 Nos (d) MCCB 4 Pole, 415 V, with adjustable type, 160 Amps with breaking capacity 36 KA 3 Nos (e) MCCB 4 Pole, 415 V, Adjustable type,125 Amps with breaking capacity 16 KA 2 Nos (f) 09 Nos LED indication lamp |
| 84 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (1500 mm x1200mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 400 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job(b) MCCB 4 Pole, 415 V, with microprocessor release, 250 Amps with breaking capacity 36 KA 1 Nos OUT GOING(a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 2 Nos (b) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA 4 Nos (c) 09 Nos LED indication lamp |
| 85 | Supply , installation, testing and commissioning in replacement of indoor LT feeder pillar box panel board (1500 mm x1200mmx500 mm), CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made double door with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 400 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundatoin suitable to accommodate the following as specied and as directedINCOMING(a) Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp 03 nos(incoming) complete and all as per standard pratice -1 Job (a) MCCB 4 Pole, 415 V, with microprocessor release, 250 Amps with breaking capacity 36 KA 1 Nos OUT GOING(a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA 2 Nos (b) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA 2 Nos(c) MCCB 4 Pole, 415 V, Adjustable type,125Amps with breaking capacity 16 KA 2 Nos (d) 09 Nos LED indication lamp Note for Ser No 69 to 79 :- All MCCBs/ instruments/ MCBs/ Bus Bar shall be housed in separate housing wiht on-off latches in the housing and Digital Panel Meter Multifunctional tye for Amps, Volts, KWH, Power Factor (Incoming) and other parameters flush mounting with LED indication lamp for each outgoing complete and all as per standard pratice. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
