|
| 1 | M&L for Servicing of Automatic Power Factor Correction (APFC) Panel, LT Distribution system, 3 Phase, 415 volt, 50 Hz, including taking shut down and cleaning of all the parts by air blower, applying suitable chemical (CRC), greasing of all moving parts, checking resistance of all the contact points and refixing the same in original position complete all as specified and as directed. |
| 2 | S&F in repairs including testing of APFC Controller 14 Stage complete all as specified and as directed. |
| 3 | S&F in repairs 600/5A Current Transformer Tape Wonde complete all as specified and as directed. |
| 4 | S&F in repairs 300/5A Current Transformer Tape Wonde complete all as specified and as directed. |
| 5 | S&F in repairs 200/5A Current Transformer Tape Wonde complete all as specified and as directed. |
| 6 | S&F in repairs 4 Pole 2 Way Selector Switch with off complete all as specified and as directed. |
| 7 | S&F in repairs 0-300 Amp Digital Analog Ammeter complete all as specified and as directed. |
| 8 | S&F in repairs 0-500 Volt Digital Volt complete all as specified and as directed. |
| 9 | S&F in repairs Illuminated Green push button with elements complete all as specified and as directed. |
| 10 | S&F in repairs Illuminated Red push button with elements complete all as specified and as directed. |
| 11 | S&F in repairs including testing of 25 KVAr Heavy Duty Capacitor Box series complete all as specified and as directed. |
| 12 | S&F in repairs including testing of 10 KVAr Heavy Duty Capacitor Box series complete all as specified and as directed. |
| 13 | S&F in repairs including testing of 5 KVAr Heavy Duty Capacitor Box series complete all as specified and as directed. |
| 14 | S&F in repairs Capacitor duty power contractor suitable for capacity 25 KVAr (Model MOC 25) with add on complete all as specified and as directed. |
| 15 | S&F in repairs Capacitor duty power contractor suitable for capacity 10 KVAr (Model MOC 10) with add on complete all as specified and as directed. |
| 16 | S&F in repairs Capacitor duty power contractor suitable for capacity 5 KVAr (Model MOC 5) with add on complete all as specified and as directed. |
| 17 | S&F in repairs indicating lamp (Red, Green & Yellow) complete all as specified and as directed. |
| 18 | S&F in repairs MCCB 4 pole, 415 V, 63 Amp, 25 kA complete all as specified and as directed. |
| 19 | S&F in repairs MCCB 4 pole, 415 V, 100 Amp, 25 kA complete all as specified and as directed. |
| 20 | S&F in repairs MCCB 4 pole, 415 V, 125 Amp, 25 kA complete all as specified and as directed. |
| 21 | S&F in repairs MCCB 4 pole, 415 V, 160 Amp, 25 kA complete all as specified and as directed. |
| 22 | S&F in repairs MCCB 4 pole, 415 V, 200 Amp, 25 kA complete all as specified and as directed. |
| 23 | S&F in repairs MCCB 4 pole, 415 V, 250 Amp, 36 kA complete all as specified and as directed. |
| 24 | S&F in repairs MCCB 4 pole, 415 V, 315 Amp, 36 kA complete all as specified and as directed. |
| 25 | S&F in repairs MCCB 4 pole, 415 V, 400 Amp, 36 kA complete all as specified and as directed. |
| 26 | S&F in repairs MCCB Spreader Terminals 2 Pole complete all as specified and as directed. |
| 27 | S&F in repairs MCCB Spreader Terminals 3 Pole complete all as specified and as directed. |
| 28 | S&F in repairs MCCB Spreader Terminals 4 Pole complete all as specified and as directed. |
| 29 | S&F Cable jointing kit for LT XLPE Cable (Earthed) grade cable for indoor termination heat shrink type joint with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size upto 90 sqmm complete all as specified and as directed. |
| 30 | S&F Cable jointing kit for LT XLPE Cable (Earthed) grade cable for indoor termination heat shrink type joint with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 120 sqmm to 240 sqmm complete all as specified and as directed. |
| 31 | S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes for use as duct covers as per existing size including taking out of old plates, any type complete all as specified and as directed. |
| 32 | M&L for Servicing of Air Circuit Breaker AC three phase 415 volt, 50 Hz, 800 Amp to 1600 Amp including taking shut down and racking out the complete assembly, cleaning of all the parts by air blower, applying suitable chemical (CRC), greasing of all moving parts, checking resistance of all the contact points and refixing the same in original position complete all as specified and as directed. |
| 33 | Taking out of old LT UG cable 1100 volts grade complete all as specified and as directed for the following size of cables:- |
| 34 | 240 sqmm 3.5 core |
| 35 | 185 sqmm 3.5 core |
| 36 | 95 to 120 sqmm 3.5 core |
| 37 | 50 sqmm 3.5 core |
| 38 | 25 to 35 sqmm 3.5 core |
| 39 | 10 to 16 sqmm 2/4 core |
| 40 | Supply and Laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed for the following size of cables: - |
| 41 | 240 sqmm 3.5 core |
| 42 | 185 sqmm 3.5 core |
| 43 | 120 sqmm 3.5 core |
| 44 | 95 sqmm 3.5 core |
| 45 | 50 sqmm 3.5 core |
| 46 | 35 sqmm 3.5 core |
| 47 | 25 sqmm 4 core |
| 48 | 16 sqmm 4 core |
| 49 | 10 sqmm 4 core |
| 50 | 10 sqmm 2 core |
| 51 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. area n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specifed and directed. |
| 52 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in any type of soil complete all as specifed and directed. |
| 53 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil complete all as specifed and directed. |
| 54 | M&L for dry river Sand filling in trenches including punning down consolidation in any type of soil complete all as specifed and directed. NOTE: Punned thickness shall be measured for payement purpose. |
| 55 | Supply and laying of DWC Pipe of 40mm dia including taking out old pipe, any type complete all as specified and as directed. |
| 56 | M&L for tubes, 'light grade', galvanised, with all fitting; laid in trenches for cable/ earth lead protection including taking out old pipe, any type complete all as specified and as directed of the following sizes: - |
| 57 | 100 mm dia nominal bore |
| 58 | 80 mm dia nominal bore |
| 59 | 50 mm dia nominal bore |
| 60 | 40 mm dia nominal bore |
| 61 | M&L for brick protection of cables in trenches with old size sub-class 'B' bricks complete all as specifed and directed. |
| 62 | M&L for cutting of existing bituminous metal road for laying of cables including demolition of road surface, excavation from bottom level of road upto a depth of 0.55 m from road surface and returning filling of excavated earth and making good the road surface with & including PCC type C2 (1:3:6) with 40 mm graded aggregate upto a depth of 10 cm from road surface and removing of excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil complete all as specifed and directed. Note: Laying of cable/ protection pipe will be measured and paid separately. |
| 63 | M&L for Servicing of Air Circuit Breaker AC three phase 415 volt, 50 Hz, 800 Amp to 1600 Amp including taking shut down and racking out the complete assembly, cleaning of all the parts by air blower, applying suitable chemical (CRC), greasing of all moving parts, checking resistance of all the contact points and refixing the same in original position complete all as specifed and directed. |
| 64 | M&L for Maintenance of LT distribution panel after taking proper shutdown including cleaning of enclosure with dry cloth and cleaning of contact points with suitable electrical contact cleaning agent and clean dry cloth, checking of tightness of all the contact points, replacement of defective/ burnt out lugs and bolts & nuts and reporting of major defects if any found during maintenence complete all as specifed and directed for the following: - |
| 65 | LT panel with Incoming ACB upto 1600 Amp 1 No and outgoing MCCBs upto 630 Amp 4 pole upto 8 Nos and Changeover if any |
| 66 | LT panel with Incoming MCCB upto 800 Amp 1 No and outgoing MCCBs upto 400 Amp 4 pole upto 8 Nos, all MCBs, Changeover if any |
| 67 | LT feeder pillar box with Incoming MCCB upto 400 Amp 1 No and outgoing MCCBs upto 250 Amp 4 pole upto 8 Nos and all MCBs |
| 68 | M&L for Painting of LT Panel / MES equipment after preparation of old painted surface and M&L for painting with two coats synthetic enamel paint with spray painting (of approved colour) including taking proper precautionary measures by disconnecting electric supply complete all as specifed and directed. |
| 69 | S&F in replacement insulating LT synthetic rubber mat of size 1 m x 2 m x 2 mm thick class A as per IS: 15652 (2006) complete all as specified and directed. |
| 70 | Taking out cable loop after cable ends from panels, cutting/removing heated cable ends with burnt lugs and inserting new lugs after cutting opening of fresh cable end complete including earth work and relaying cable around for cable size 70 to 185 sqmm complete all as specifed and directed. |
| 71 | Expertise and labour only for load balancing of feeder complete after removing all service cables connected to all three phase , checking these for ohmic value, leakage if any and connecting to all the three phases in such a sequence so that is nearly balanced in all the three phase complete all as specifed and directed. |
| 72 | Taking out old LT Panel from one location and shifting to new location including diconnecting the cables from old location and connecting the cables at new location, also including cost of transportation to new site and necessary PCC work complete all as specifed and directed. |
| 73 | M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32x6mm galvanised iron strip including taking out of old strip complete all as specifed and directed. |
| 74 | M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screw including taking out of old one complete all as specifed and directed. |
| 75 | Supply, fixing & testing in repairs changeover switch-disconnector (as per existing) of capacity 400 Amps, 415 Volts, AC 23A, 4P, enclosure version does not require separate cable gland box, terminal shrouds, source separator and phase barries included, staggered terminals make cable termination easy, suitable for horizontal as well as vertical mounting, padlocking in OFF position complete all as specifed and directed. Please Enable Macros to View BoQ information |
| 76 | Supply, fixing & testing in repairs changeover switch-disconnector (as per existing) of capacity 400 Amps, 415 Volts, AC 23A, 4P, enclosure version does not require separate cable gland box, terminal shrouds, source separator and phase barries included, staggered terminals make cable termination easy, suitable for horizontal as well as vertical mounting, padlocking in OFF position complete all as specifed and directed. Please Enable Macros to View BoQ information |
