|
| 1 | Repairing Public Hand Pumps |
| 2 | Repairing public hand pumps located within the pipeline area. |
| 3 | Repair of Submersible and Electric Pumps in Public Borewells |
| 4 | Construction of a new RCC platform for the hand pump |
| 5 | Complete Removing of 200 H.P. VHS Motor with dismentaling Cable connection and labour charges for repair |
| 6 | Complete dismentaling of 200 H.P. VHS Motor for Repairs. |
| 7 | Complete rewiding of 200 HP VHS motor with proper gauge of supper enameled copper wire F-Class insulation material, Dr. beck Varnishing, heating, backing loading unloading Transportation Complete. |
| 8 | Reassemble of motor after repair. |
| 9 | Providing and fixing Ball bearing No. 6316 SKF, ZKL, FAG |
| 10 | Providing and fixing Thrust bearing No. 7322 SKF, ZKL, FAG |
| 11 | Providing and fixing Motor connection Plate for 200 HP |
| 12 | Re-errection of motor after repair on discharge head stool with test and trial etc complete. |
| 13 | Transportation Charges from Site to Workshop with loading and unloading charges |
| 14 | Providing and fixing LC 1 FDP 400 A contactor |
| 15 | Providing and fixing LC 1 FDP 200 A contactor |
| 16 | Providing and fixing 150 Sq. mm 400/5 Ammeter |
| 17 | Providing and fixing 2 No. 2 NC element |
| 18 | Providing and fixing 150 Sq. mm 0-500 V. Voltmeter |
| 19 | Providing and fixing A.S.S. |
| 20 | Providing and fixing AV.S.S. |
| 21 | Providing and fixing indicating Lamp |
| 22 | Providing and fixing door lock |
| 23 | Providing and fixing ON Push button with Element with Element |
| 24 | Providing and fixing OFF Push button |
| 25 | Providing and fixing MPR D2 Menilec |
| 26 | Providing and fixing C.T. Menilec |
| 27 | Providing and fixing Timer |
| 28 | Providing and fixing No Load contactor |
| 29 | Providing and fixing M.C.B. 10 Amps. |
| 30 | Complete dismentaling of burnt wiring and New rewiring with 2.5 Sq. mm Multistand copper wire. |
| 31 | Providing and fixing PVC ducting chanell |
| 32 | Providing and fixing Buzbar Insulated Slive |
| 33 | Providing and fixing C.T. 400/5 |
| 34 | Providing and fixing C.T. /oprated Realaly suitable for 200 HP |
| 35 | Providing and fixing Transformer oil. |
| 36 | Testing Charges of Starter Repair |
| 37 | Transportation Charges |
| 38 | Rewinding of Auto Transformer including dismentlling, rewinding with new insulated copper wire/strip of proper size varnishing becking and filling with fresh transformer oil. |
| 39 | Providing and fixing brass stud with 4 nut & bolt |
| 40 | Providing and fixing Insulating Bushes male and female |
| 41 | Providing and fixing 50 Sq. mm multistand copper wire |
| 42 | Comlete opening cleaning, che gwiring of main panell wiring and servicing of all switch gear complete job. |
| 43 | Providing and fixing 0-500 Volt Voltmeter on main panel board |
| 44 | Providing and fixing 0-400 amps Ammeter |
| 45 | Providing and fixing 630 Amps ACB Male Contact |
| 46 | Providing and fixing 630 Amps ACB Female Contact |
| 47 | Providing and fixing overload coil |
| 48 | Complete Reparis of ACB 630 Amps C & S make, over halving of mechanizium complete Job. |
| 49 | Providing and fixing New capacitor Bank in main panell for maintain power factor. |
| 50 | Providing and fixing ASS |
| 51 | Providing and fixing VSS |
| 52 | complete Removing of 200 HP water lubricated V.T. Pump with all labour charges. |
| 53 | Complete dismentlling of bowl Assembly for Repairs. |
| 54 | Providing and fixing bowl Assembly bushes turning cutting on lath machine. |
| 55 | Providing and fixing top and bottom bowl bush (GM) with furning cutting on lath machine |
| 56 | Providing and fixing Empeller Neck Ring (GM) with furning cutting on lath machine. |
| 57 | Providing and fixing Empeller qualit |
| 58 | Providing and fixing Bowl Assembly shaft S.S. 60 mm x 2100 mm with turning cutting threading polishing on lath machine complete. |
| 59 | Providing and fixing line shaft with threading polishing on lath machine complete 42 mm x 1.5 Mtr. |
| 60 | Providing and fixing line shaft slive (S.S.) |
| 61 | Providing and fixing top shaft with threading Key way complete as per sample. |
| 62 | Providing and fixing 300 mm dia C.I. Spider as per sample. |
| 63 | Providing and fixing Rubber bushes as per line shaft sleeve. |
| 64 | Providing and fixing gland bush (GM) |
| 65 | Providing and fixing Nut bolt to colum pipe as per sample |
| 66 | Providing and fixing New Empeller (Steel) as per sample |
| 67 | Reassemble fo bowl assembly after repair. |
| 68 | Providing and fixing New rubber packing. |
| 69 | Providing making and fixing line shaft coupling. |
| 70 | Re-errection of repaired 200 HP V.T. Pumping on Jack Well with all labour charges with test and trial on full load. |
| 71 | Providing and fixing Pressure gauge 0 to 14 Kg/cm2 150 mm dia. |
| 72 | Complete Removing of 40 HP Centrifugal Pump |
| 73 | Providing and fixing Empeller neck ring (GM) |
| 74 | Providing and fixing Shaft Sleeve (GM) |
| 75 | Providing and fixing Shaft check nut |
| 76 | Providing and fixing water ring |
| 77 | Providing and fixing New Empeller (S.S.) shaft with threading, cutting as per sample. |
| 78 | Providing and fixing Empeller (SS) |
| 79 | Providing and fixing Ball bearing No. 6307 |
| 80 | Providing and fixing bearing housing |
| 81 | Re-assemble of C./F Pump with test and trial. |
| 82 | Providing and fixing Motor Pump couple set |
| 83 | Providing and fixing couple loyjoy rubber. |
| 84 | Complete Removing dismantling of 40 HP Motor for repair |
| 85 | Complete Rewinding of 40 HP Motor with F class insulation material. |
| 86 | Providing and fixing Motor bearing No. 6308 SKF, ZKL, FAG |
| 87 | Re-errection of motor with test and trial repair |
| 88 | Complete Rewiring of 40 H.P. ATS Assembeled Starter with 2.5 Multistand copper wire ferul, lugs etc complete. |
| 89 | Providing and fixing timer |
| 90 | Providing and fixing MPRD2 (Minilec) |
| 91 | Providing and fixing C.T. Oprated Realy |
| 92 | Providing and fixing 185 Amps contactor |
| 93 | Providing and fixing 185 Amps Spare contact kit of contactor. |
| 94 | Providing and fixing 100 amps contactor |
| 95 | Providing and fixing 100 Amp Spare contact kit of contactor. |
| 96 | Providing and fixing 2 No. 2 NC element |
| 97 | D Providing and fixing R-Y-B indicating lamp complete set. |
| 98 | Providing and fixing No Load contactor |
| 99 | Providing and fixing 0-500 Volt Voltmeter on ATS Starter panel. |
| 100 | Providing and fixing 0-100 Ammeter |
| 101 | Providing and fixing 100/5 Amps CT Coil |
| 102 | Providing and fixing 16 Amps MCB |
| 103 | Providing and fixing 200 Amps MCCB |
| 104 | Complete Rewinding of 40 HP ATS with supper enameled copper strip and F-Class insulation material complete three coil of taping 0%, 50%, 65%, 85%, 100% and filling new fresh oil 35 Liter. |
| 105 | Providing and filling new fresh transformer oil. |
| 106 | Complete repairs Removing, Dismantling and re erection and rewinding 10 HP Submursible Motor with PVC insulated copper wire providing and fixing motor housing bushes, thrust bearing, complete job |
| 107 | Removing of gear box. |
| 108 | Providing and fixing gear box bearing No. 2905 |
| 109 | Providing and fixing oil seal |
| 110 | Providing and fixing split gear (Bronz) |
| 111 | Providing and fixing waram gear |
| 112 | Providing and fixing gear oil |
| 113 | Providing and fixing bearing plate. |
| 114 | Providing and fixing bridge wheel bearing No. NU-318 |
| 115 | Repairs to bridge wheel. |
| 116 | Providing and fixing peditation bearing |
| 117 | Removing of Motor. |
| 118 | Rewinding of 2 H.P: Motor RPM 900 |
| 119 | Providing and fixing Motor bearing No. 6203 |
| 120 | Errection of Motor with test and trial. |
| 121 | Providing and fixing Motor and gear box couple |
| 122 | Providing and fixing couple loyjoy rubber. |
| 123 | Providing and fixing DOL Stater |
| 124 | Providing and fixing 18 Amps MCB 3 Pole |
| 125 | Providing and fixing 32 Amps M/CB 4 Pole |
| 126 | Removing of 50 H.P. V.T. Pump Oil lubricated from jack well with all labour charges. |
| 127 | Dismentaling of Bowl Assembly |
| 128 | Providing and fixing bowl bushes (GM) |
| 129 | Providing and fixing Top & Bottom bush (GM) |
| 130 | Providing and fixing Adopter bearing (GM) |
| 131 | Providing and fixing oil tube screw bearing (GM) |
| 132 | Providing and fixing empeller shaft S.S. 42 mm x 1200 mm |
| 133 | Providing and fixing oil tube 72 mm x 1.5 Mtr. With threading both end. |
| 134 | Providing and fixing Rubber Spider 72 mm x 200 mm. |
| 135 | Providing and fixing line shaft 40 mm x 1.5 Mtr. ENP with threading both end. |
| 136 | Providing and fixing line shaft coupling. |
| 137 | Providing and fixing Empeller Neck Ring. |
| 138 | Providing and fixing Empeller qualit as per sample |
| 139 | Providing and fixing Gland bush nut (GM) |
| 140 | Providing and fixing Nut Bolt. |
| 141 | Reassemble of Bowl Assembly. |
| 142 | Errection of V.T. Pump with all albour charges with test and trial. |
| 143 | Complete Rewiring of 50 H.P. ATS Assembeled Starter with 2.5 Multistand copper wire ferul, lugs etc complete. |
| 144 | Providing and fixing timer |
| 145 | Providing and fixing MPRD2 (Minilec) |
| 146 | Providing and fixing C.T. Oprated Realy |
| 147 | Providing and fixing 200 Amps contactor |
| 148 | Providing and fixing 200 Amp Spare contact kit of contactor |
| 149 | Providing and fixing 100 amps contactor |
| 150 | Providing and fixing 2 No. 2 NC element |
| 151 | Providing and fixing 100 Amp Spare contact kit of contactor. |
| 152 | Providing and fixing R-Y-B indicating lamp complete set. |
| 153 | Providing and fixing No Load contactor |
| 154 | Providing and fixing 0-500 Volt Voltmeter |
| 155 | Providing and fixing 0-100 Ammeter |
| 156 | Providing and fixing 100/5 Amps CT Coil |
| 157 | Providing and fixing 16 Amps MCB |
| 158 | Complete Rewinding of 50 HP ATS with supper enameled copper strip and F-Class insulation material complete three coil of taping 0%, 50%, 65%, 85%, 100% and filling new fresh oil 35 Liter. |
| 159 | Providing and filling new fresh transformer oil. |
| 160 | Providing and fixing 125 Amps C-O-S. |
| 161 | Providing and fixing 125 Amps SFU |
| 162 | Providing and fixing fuse link 100 Amps. |
| 163 | Providing and fixing Volt meter 0-500 Volt. |
| 164 | Providing and fixing Ameter 100/5 |
| 165 | Providing and fixing A.S.S. |
| 166 | Providing and fixing V.S.S. |
| 167 | Providing and fixing indicating Lamp Set. |
| 168 | Removing of 50 HP Kirloskar Make VHS Motor for Repair |
| 169 | Dismentaling of 50 H.P. Motor for Repair. |
| 170 | Complete Rewiding of 50 H.P. Motor with Supper enameled copper wire \\"F\\" Class Insulation material with heating beacking varnishing etc. complete. |
| 171 | Re-assemble of Motor after Rewinding. |
| 172 | Re-errection of motor with test and trial. |
| 173 | Providing and fixing Ball bearing No. 6311 Make SKF, ZKL, FAG |
| 174 | Providing and fixing thrust bearing No. 7220 SKF, ZKL, FAG |
| 175 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 80 MM |
| 176 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 100 MM |
| 177 | Providing and fixing New Sluce Valve spilndle rod S.S. on lath machine threading as per sample 150 MM |
| 178 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 200 MM |
| 179 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 250 MM |
| 180 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 300 MM |
| 181 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 350 MM |
| 182 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 400 MM |
| 183 | Providing and fixing New Sluce Valve spindle rod S.S. on lath machine threading as per sample 450 MM |
| 184 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 80 MM |
| 185 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 100 MM |
| 186 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 150 MM |
| 187 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 200 MM |
| 188 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 250 MM |
| 189 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 300 MM |
| 190 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 350 MM |
| 191 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 400 MM |
| 192 | Providing and making new sluce valve checknut (GM) moulding threading on lath machine as per sample 450 MM |
| 193 | Providing and fixing casting new NRV Flap 250 MM |
| 194 | Providing and fixing casting new NRV Flap 450 MM |
| 195 | Providing and fixing Flap shaft SS 250 MM |
| 196 | Providing and fixing Flap shaft SS 450 MM |
| 197 | Providing and fixing shaft bushes 250 MM |
| 198 | Providing and fixing shaft bushes 450 MM |
| 199 | Providing and fixing Air Valve Bowl 80 MM |
| 200 | Providing and fixing Air Valve Plate without bolt |
| 201 | Repairs to Air Valve at site |
| 202 | Excavation work at site by JCB |
| 203 | Making new clamp 450 mm with drilling new nut bolt and rubber packing complete |
| 204 | Fixing of clamp at site with all labour charges |
| 205 | Complete Removing of 50 HP Centrifugal Pump |
| 206 | Providing and fixing Empeller neck ring (GM) |
| 207 | Providing and fixing Shaft Sleeve (GM) |
| 208 | Providing and fixing Shaft check nut |
| 209 | Providing and fixing water ring |
| 210 | Providing and fixing New Empeller (S.S.) shaft with threading, cutting as per sample. |
| 211 | Providing and fixing Empeller (SS) |
| 212 | Providing and fixing Ball bearing No. 6307 |
| 213 | Providing and fixing bearing housing |
| 214 | Re-assemble of C./F Pump with test and trial. |
| 215 | Providing and fixing Motor Pump couple set |
| 216 | Providing and fixing couple loyjoy rubber. |
| 217 | Complete Removing dismantling of 50 HP Motor for repair |
| 218 | Complete Rewinding of 50 HP Motor with F class insulation material. |
| 219 | Providing and fixing Motor bearing No. 6308 SKF, ZKL, FAG |
| 220 | Re-errection of motor with test and trial after repair |
| 221 | Complete Rewiring of 50 H.P. ATS Assembeled Starter with 2.5 Multistand copper wire ferul, lugs etc complete. |
| 222 | Providing and fixing timer |
| 223 | Providing and fixing MPRD2 (Minilec) |
| 224 | Providing and fixing C.T. Oprated Realy |
| 225 | Providing and fixing 185 Amps contactor |
| 226 | Providing and fixing 185 Amps Spare contact kit of contactor. |
| 227 | Providing and fixing 100 amps contactor |
| 228 | Providing and fixing 100 Amp Spare contact kit of contactor. |
| 229 | Providing and fixing 2 No. 2 NC element |
| 230 | Providing and fixing R-Y-B indicating lamp complete set. |
| 231 | Providing and fixing No Load contactor |
| 232 | Providing and fixing 0-500 Volt Voltmeter on ATS Starter panel. |
| 233 | Providing and fixing 0-100 Ammeter |
| 234 | Providing and fixing 100/5 Amps CT Coil |
| 235 | Providing and fixing 16 Amps MCB |
| 236 | Providing and fixing 200 Amps MCCB |
| 237 | Complete Rewinding of 50 HP ATS with supper enameled copper strip and F-Class insulation material complete three coil of taping 0%, 50%, 65%, 85%, 100% and filling new fresh oil 35 Liter. |
| 238 | Providing and filling new fresh transformer oil. |
| 239 | Providing and fixing change over switch 250 Amps |
| 240 | Providing and fixing 200 Amps MCCB |
| 241 | Complete re-wiring of main panel |
| 242 | Supplying and making sheet metal plate work of 150 mm Kinetic Airvalve safty box cutting MS Sheet by Gas cutter and drilling and pipe size hole sheet size 14 mm 210 mm and box size height 30\\" x length 30\\" x width 13\\" (Per Job 120 Kg.) |
| 243 | Fixing of safty air valve box welding at site Siddeshver to Basmat 400 mm pipe line welding at site by generator at Rent. |
| 244 | Vehicle transportation by loading & unloading of Generator & material. |
| 245 | Kinetic double bowl Air valve only Bowl Price Big Size |
| 246 | Kinetic double bowl Air valve only Bowl Price Small Size |
| 247 | Air Valve Repairing Charges |
| 248 | Providing supplying of 150 mm new Kinetic Air Valve |
| 249 | Welding to 450 mm Pipe line Hole Patch by MS Plate Welding by Generator at Rent and with whicle Rent and excavation work by JCB 3 Hour Please Enable Macros to View BoQ information |
