|
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). (Excluding Cost of GST) |
| 2 | Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). As Per SOR Ch. 17 (694)(Excluding Cost of GST) |
| 3 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. As per Morth Specification No.-15.01, 304(B)(Excluding Cost of GST) |
| 4 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.PCC Grade M15 PCC Grade M15 using batching plant & Concrete pump.(Excluding Cost of GST) |
| 5 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M20 using batching plant transit mixer & Concrete pump(Excluding Cost of GST) |
| 6 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. 1500, 1700 & 2100 Sr 12.08 (R.C.C. Grade M-30)(Excluding Cost of GST) |
| 7 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications 1500, 1700 & 2200 sr no. 13.05. (RCC Grade M-30)(Excluding Cost of GST) |
| 8 | R.C.C. M-30 :- Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications clauses 800, 1205.4 and 1205.5(Excluding Cost of GST) |
| 9 | Providing and laying cement concrete wearing coat M-30 grade excluding reinforcement complete as per drawing and technical specification clause 800 and 1206.3 (Excluding Cost of GST) |
| 10 | Supplying, fitting and placing HYSD (Fe-500) bar reinforcement in foundation complete as per drawings and technical specification clauses 1000 and 1202.(Excluding Cost of GST) |
| 11 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications(Excluding Cost of GST) |
| 12 | Drainage Spouts complete as per drawing and Technical specification. As per MORT&H Specification No. 14.9(Excluding Cost of GST) |
| 13 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401(Excluding Cost of GST) |
| 14 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(Excluding Cost of GST) |
| 15 | Providing and applying primer coat with SS grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MORD specification No. 502 MORTH(Including Cost of Bitumen/Emulsion But Excluding Cost of GST) |
| 16 | Providing and applying Tack coat with bitumen VG-10 on prepared bituminous surface including cleaning of road surface and spraying tack coat at the rate of 0.25 kg sqm using mechincal means. (MoRT&H Specification No. 503)(Including Cost of Bitumen/Emulsion But Excluding Cost of GST) |
| 17 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(Including Cost of Bitumen/Emulsion But Excluding Cost of GST) |
| 18 | Providing and applying Tack coat with bitumen VG-10 on prepared bituminous surface including cleaning of road surface and spraying tack coat at the rate of 0.20 kg sqm using mechincal means. (MoRT&H Specification No. 503)(Including Cost of Bitumen/Emulsion But Excluding Cost of GST) |
| 19 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects(Including Cost of Bitumen/Emulsion But Excluding Cost of GST) |
| 20 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.(Excluding Cost of GST) |
| 21 | Back Filling behind abutment, wing Wall & Return wall Complet as per Drawing and Technical Specification.(Excluding Cost of GST) |
| 22 | Providing and laying filter media undermeath pitching in slopes completer as drawing and technical specification cl. 1302(Excluding Cost of GST) |
| 23 | Construction of Embankment with Material obtained from Borrowpits (Lead 2Km.) :-Construction of embankment with approved material obtained from borrow pits with all lifts and leads with 1 Km, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2(Excluding Cost of GST) |
| 24 | Supply and Laying Hume Pipe 1000 mm Dia incluidng all material, labour T&P etc. complete as per direction of E/I(Excluding Cost of GST) |
| 25 | Brick soling with straight overburnt bricks laid on edge including preparation of subgrade to required camber and including supply of bricks, filling joints with local earth spreading a blind coat of 1cm(3/8\\") depth of local earth P.I. 5 to 7 or sand over the entire surface and including labours, T&P etc. required for proper completion of work.(Excluding Cost of GST) |
| 26 | Supply and Filling of Gunny begss with local earth including placing as per requirement of site and as direction of E/I(Excluding Cost of GST) |
| 27 | Providing and laying of Hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free from streaks and holes.(Excluding Cost of GST) Please Enable Macros to View BoQ information |
