|
| 1 | Supply and laying / clamping of 25 sq.mm X 3.5 core, 1.1 KV grade LT Cable XLPE insulated & PVC sheathed, armoured, PVC overall sheathed multi stranded aluminum conductor Cable conforming to IS 7048 / Part-I through existing trench / to the pole / wall with existing clamps as directed by Engineer-in-charge. Brands: Finolex / Gloster / RPG / Polycab / Torrent / KEI / RR Kable / GEMSCAB. |
| 2 | Supply, laying / Clamping of 50 mm double walled corrugated HDPE duct made as per specification BSEN-500 86/IS 14930 Par-II to the pole with existing clamps / in existing trench as directed by Engineer-in-Charge complete with all labour tools, tackles and materials.MAKES: KSP/ SUDHAKAR / NANDI. |
| 3 | Excavation of trenches in Hard/dense soil of required width for laying of GI pipes, cables and retrieving the existing cables etc., including dressing of sides, ramming of bottoms, suitable depth including getting out the excavated soil and the returning the soil including consolidating each deposit layer by ramming, watering etc., and disposing of surplus excavated soil as directed by engineer in charge and complete all labour and material. |
| 4 | Supply and fabrication of steel by using suitable flats, angles, channels of required sizes to provide required cross arms, back clamps, support clamps, frames including cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer complete as directed by Engineer in charge. |
| 5 | Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base/pole concreting, road cutting etc. as directed by engineer in charge including all labour and tools. |
| 6 | Providing, earth station using 2.5 meters long, 40 mm medium grade G.I. pipe in a masonry enclosure duly filling with alternate layers of salt and charcoal complete with GI funnel and covering with RCC cover conforming to IS as directed by Engineer in charge including all labour and material. |
| 7 | Supplying, fixing, connecting and commissioning of 25 X 5 MM GI earth strip in recess/surface/clamped to wall/through PCC etc., from earth to switch gear/equipment including connecting the same at both ends as directed by engineer in charge including all labour and material. |
| 8 | Supply, Fixing, Testing & Commissioning of 4 pole, 63A, MCCB with enclosure and operating handle, voltage indicated LED lamps 440V, 50 Hz, 25KA, as directed by engineer in charge including all labour and tools & tackles.Make: L&S/ Havells/ Siemens/ABB. |
| 9 | Auguring (Horizontal directional drilling (HDD) for Road for drawing of 25 sq.mm X 3.5 Core Cable approx. 6feet depth as directed by Engineer-in-Charge. |
| 10 | Supply, Installation, Testing and commissioning of 100A, 4 Pole, Automatic Transfer Switch (ATS) with enclosure, rated operating Voltage 415V AC supply, frequency 50Hz, motor operating voltage 230V AC, operating cycle 10000, confirms to IEC60947-6-1Makes: L&K / Schneider // Siemens / ABB |
| 11 | Removal of existing B.G. rail pole/ Tubular pole / spun pole duly breaking the coping and base PCC, excavating the earth upto 0.5mts depth from the ground level cutting the pole refilling the excavated earth and making the surface good to match the surroundings, returning the removed pole to E/M section stores /general stores as directed by Engineer in charge including all labour and material. Please Enable Macros to View BoQ information |
