|
| 1 | Taking down chowkhat or frame(wooden/steel) exc 1.5 Sqm but n.exc 4.00 Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and as directed. |
| 2 | Taking down shutters (wooden/steel) exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. |
| 3 | S&F 105x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed |
| 4 | M & L for cement concrete 1:3:6 type C-1, using 20mm graded stone aggregates as in filling in back of Pressed steel frames and hold fast block complete all as specified and directed |
| 5 | S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 6 | S & F 12mm thickness Plywood, grade BWR, type BB, fixed with screws to timber/aluminium frame work complete all as specified and directed |
| 7 | S & F butt hinges 125 mm long medium weight, cold rolled mild steel complete all as specified and as directed |
| 8 | S&F etxtruted aluminium alloy handles,fabricated type anodised 150mm long complete all as specified and as directed. |
| 9 | S&F aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and as directed. |
| 10 | M&L floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm long all as specified and directed. |
| 11 | S&F aluminium alloy sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast of extruded section 250 mm long complete all as specified and as directed. |
| 12 | M&L mild steel framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed |
| 13 | S & F 18mm thickness Plywood, grade BWR, type BB, fixed with screws to timber/aluminium frame work complete all as specified and directed |
| 14 | S&F decorative laminate type -1, 0.90mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and directed |
| 15 | Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, fixed to wooden frame/welded to metal frame complete all as specified and as directed. |
| 16 | S & F 100mm long stainless steel handle complete all as specified and as directed |
| 17 | Taking down steel window/ventilators shutters area n.exc 1.0 sqm each including all fittings,cutting and grinding the surface attached with iron grill (without taking out grill) and S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement, etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 18 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50 sqm each pane complete all as specified and directed. |
| 19 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 20 | M&L for cement plaster rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth without using extra cement and taking down old cement plaster on brick or stone walls, or concrete walls etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. |
| 21 | M & L for preparation of new plastered surfaces of walls applying wall care putty of one coat over plastered surface to prepare the surface even and smooth finish and applying two finishing coat of oil bound distemper over a coat of primer complete all as specified and directed. |
| 22 | M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink wood primer all as specified and directed. |
| 23 | M&L One coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed. |
| 24 | M&L providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces all as specified and as directed. |
| 25 | Note :- An amount of Rs 1,30,300.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
