|
| 1 | M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed. |
| 2 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) including dismantling complete all as directed and specified. |
| 3 | M&L for Glazed coloured ceramic tiles of size 450x300X7 mm thick set and jointed in neat cement slurry including matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado including and over 10 mm thick rendering in CM 1:4 finished fair to receive tiles complete all as specified and directed. |
| 4 | M&L for 18mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, cooking platforms and including 20mm thick cement mortar (1:4) including pointing in white cement (tiles 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone using marble dust with admixture of pigment to match including rounding and polishing to edges of granite slab complete all as specified and directed. |
| 5 | M&L for hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 6 | M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 7 | M&L for 25 mm thick sand filling in bedding layer for laying floor finished complete all as specified and directed. |
| 8 | M&L for Machine pressed precast rubbed moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade jointed with grey cement and pigments complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper with smooth roller finish, complete all as specified and directed. |
| 10 | M&L for preparing old plastered / decorated surface of wall including cornices etc by washing, rubbing down and applying one coat of oil bound distemper with smooth roller finish, complete all as specified and directed. |
| 11 | M&L for preparing old plastered / decorated surface of ceiling surface, including cornices etc by brooming down and applying one coat of oil bound distemper with smooth roller finish, complete all as specified and directed. |
| 12 | M&L for Complete removal of existing surface finish and applying 3 mm thick wall care putty and applying two coat of oil bound distemper over a coat of primer at wall surfaces complete all as specified and directed. |
| 13 | M&L for preparation of old wall surface and applying two coats of White wash complete all as specified and directed. |
| 14 | M&L for one coat of white washing on old decorated ceiling surfaces incl preparation of surfaces complete all as specified and directed. |
| 15 | M&L for preparation of old painted wooden surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel Painting complete all as specified and directed. |
| 16 | M&L for preparation of old painted steel surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel Painting complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment of wall and applying two coat of cement base paint complete all as specified and as directed. |
| 18 | M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion paint complete all as specified and directed. |
| 19 | Demolition of plain cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 20 | M&L for 75 mm thick plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) for plinth protection complete all as specified and directed. |
| 21 | Demolition of brick work or stone masonry built in CM including all quoins complete all as specified and directed. |
| 22 | Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description complete all as specified and directed. |
| 23 | M&L for precast cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 24 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed. |
| 25 | M&L for preparation of newly plastered surfaces of wall of any description and applying two coats of Oil bound distemper over a coat of chalk whiting on plastered surfaces complete all as specified and directed. |
| 26 | S&F in repairs 1mm thick, stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed. |
| 27 | M&L for Removal and cleaning of vegetation, fungus, moss small trees etc from the roof top, chajja and removing spoils to a distance n.exc 100 m from the periphery of the single/Double story building complete all as specified and directed. |
| 28 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. |
| 29 | S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chromium plated hanging type device complete all as specified and directed. |
| 30 | S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe complete all as specified and as directed. |
| 31 | S&F in repairs vitreous China wash basin, white or coloured of size 550 x 400 mm including brackets complete all as specified and directed. |
| 32 | S&F in repairs Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts, screwed for iron pipe and fixed completed all as specified. |
| 33 | S&F in repairs Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 34 | S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. |
| 35 | S&F in repairs Brass CP centre hole Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm Dia complete all as specified and directed.Make :- Cera model F-2008461 or equivalent as approved by GE. |
| 36 | S&F in repairs Wall mixer with non telephonic Shower arrangement with connecting legs & Wall flanges complete all as specified and directed. Make - Jaguar, Cat Part No - CON-219KN or equivalent as approved by GE. |
| 37 | S&F in repairs sink cock fancy type and (table mounted) with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302) or equivalent as approved by GE. |
| 38 | S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore complete all as specified and directed. Make: Cera Model F2002161 or equivalent as approved by GE. |
| 39 | S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 40 | S&F in repairs Towel Rack with lower hanger(stainless steel), fixed with screws, complete all as specified and directed. Note: Make Jaguar (Code No AHS-1581H) or Equivalent make in PS. |
| 41 | S& in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 42 | S&F in repair PVC bathroom Cabinet mirror of size 500x400mm complete all as specified and directed. Make- Prayag Cat No-556 or equivalent as approved by GE. |
| 43 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. |
| 44 | S&F of 32mm waste pipe for wash hand basin complete all as specified and as directed. |
| 45 | S&F in repairs Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed |
| 46 | S&F in repairs CP Shower arm 15 mm size,195 mm long with bend of 45 degree with flange as specified and as directed. |
| 47 | S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and directed. |
| 48 | S&F in repairs Paper holder with Flap Recessed Type (Stainless steel), complete all as specified and directed. Make : Jaguar (Code No AQN-CHR-7753) or equivalent as approved by GE. |
| 49 | S&F in repairs Corner Glass shelf of size 225x225mm including necessary holding arrangements with screws etc complete all as specified and directed. Make: Cera Model F-5005102 or equivalent as approved by GE. |
| 50 | S&F PVC floor trap 110mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 51 | S&F 110 mm dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed. |
| 52 | S&F PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed. |
| 53 | S&F PVC (SWR) bends 75 mm Dia in any radius with access door etc. complete all as specified and directed. |
| 54 | S&F PVC (SWR) 75mm Dia junction (single 'T') equal or unequal with access door etc. complete all as specified and directed. |
| 55 | S&F PVC (SWR) 75mm dia branch piece single (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste including jointing with rubber washer and solvent clamps etc. complete all as specified and directed. |
| 56 | S&F CP grating size 100mm fixed with white cement all as specified and directed. |
| 57 | S&F in repairs of CP health faucet including necessary holding arrangements with screws etc all as specified and directed. Make-Cera F-8030103 or equivalent as approved by GE. |
| 58 | S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of over all size 915x460mm and bowl size 410x330x160mm complete all as specified and directed. |
| 59 | Taking down door chowkhats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 60 | Taking down door chowkhats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 61 | Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm, complete all as specified and directed. |
| 62 | M&L for taking down shutters of any description exc 2sqm each and refixing in the same opening complete all as specified and directed. |
| 63 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet complete all as specified and directed. |
| 64 | M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete all as specified and directed. |
| 65 | M&L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and prelaminated side with different design and other side plain white of density not less than 600kg/cum, should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity and complete all as specified and directed. |
| 66 | M&L in repairs 12mm thick Plywood grade BWP, type BB fixed with Screw or timber frame work complete all as specified and directed. |
| 67 | S&F 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 68 | S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 69 | S&F for Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, with lock rail. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 70 | S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats complete all as specified and directed. |
| 71 | M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 72 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 73 | S&F for aluminium alloy anodised, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 74 | S&F for aluminium alloy anodised, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified and directed. |
| 75 | S&F for aluminium handle 150mm cast type anodised complete all as specified and directed. |
| 76 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 77 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beads complete all as specified and directed. |
| 78 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 79 | S&F figured glass pin head type 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 80 | S&F sheet glass ordinary quality 4.8mm thick as in doors, showcase aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket complete all as specified and directed. |
| 81 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 82 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 83 | S&F in repairs decorative wooden finished curtain rod, mild steel, chromium plated of 20 mm dia complete all as specified and directed. |
| 84 | S&F decorative wooden finished type, chromium plated brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete all as specified and directed. |
| 85 | M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble masonry complete all as specified and directed. |
| 86 | Taking up or down 15mm size steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 87 | S&F 20mm Dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 88 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 89 | S&F of Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 90 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 91 | S&F Steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, complete all as specified and directed. |
| 92 | Removing existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, cleaning the surface & removing the debries to a distance exc 250m and n.exc 500m from the starting point complete all as specified and directed. |
| 93 | M&L for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed.Note:- water proofing compound will be measured and paid separately. |
| 94 | Supply only approved integral water proofing compound complete all as specified and directed. Make: conplast x 421 IC of M/s Fosroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd. |
| 95 | M&L for laying /fixing TPO(ThermoplasticPoly Olefin) membrane of non flammable water proofing of roof which shall be a 1.5mm thick loose laid membrane in layers overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the roll's either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non woven geotextile fibre. The separation layer provided to prevent the mechanical abrasion and cushioning between the Membranes and the concrete sub structure. The termination by aluminum strip anchoring complete all as specified and directed. Make :- Fosroc/STP / CIPY / SIKA / Pidilite Dr Fixit. Note:- Work shall be executed by authorized applicators only. |
| 96 | S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron complete all as specified and directed. |
| 97 | S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement , glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. |
| 98 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges powder coated aluminium snap beading screws etc complete all as specified and directed. |
| 99 | S&F sheet black tinted glass ordinary quality 4mm thick as in doors, window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket complete all as specified and directed. |
| 100 | S&F Door closer hydraulically regulated, aluminium body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified and directed. |
| 101 | S&F Mortice lock, aluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified and directed. |
| 102 | S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium beads complete all as specified and directed. |
| 103 | S&F of pully operated clothes drying system pully it 6 feet (with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of delrin with rope guide mounted on channel pair of length 24\\"(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyester braided undyed of 3.5+0.50 mm dia complete all as specified and directed. |
| 104 | S & F Wall mounted stand consisting of four anodized, aluminium pipes, each of outer dia 22mm and inner dia 19.8mm, mounted on anodized aluminium angle of size 30 x 30x3 mm, Model- Mount it 20-4 pipes, 5 ft each complete all as specified and directed. |
| 105 | Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0) using 12.5 mm graded aggregate, depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. Please Enable Macros to View BoQ information |
