|
| 1 | S&F 20mm thick boarding clean sawn as in eaves board fixed with nails including dismantling old wooden boarding fixed in any position, complete all as specified and directed. |
| 2 | S&F 15 mm thick 2nd class soft wood clean sawn boards or planks, width n.exc. 25cm as in wall boarding including dismantling old wooden boarding fixed in any position, complete all as specified and directed. |
| 3 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall including dismantling old wooden boarding fixed in any position, complete all as specified and directed. |
| 4 | M&L for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work including dismantling old wooden boarding fixed in any position, complete all as specified and directed. |
| 5 | M&L for Australlian wood panelling 10mm thick including 6mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed including dismantling old wooden boarding fixed in any position, complete all as apecified and directed. |
| 6 | S&F in repair laminated wooden flooring of interlocking system plank size 1200x190x8 to 10 mm thick AC-4 Grade fixed over foam sheet 3 to 4mm thick as specified by manufacturer instruction, including dismantling old wooden floring planks complete all as apecified and directed. |
| 7 | M&L for Khatamband pattern false ceiling ,design as approved by GE with ornamental wood work made out of stainless including 12mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats ) and fixed including dismantling old false ceiling boards, complete all as apecified and directed. |
| 8 | M&L 2nd class soft wood (kail) as in scantling clean sawn including dismantling old timber scantling 40 sqm and over in section in any position as in unframed/framed work, complete all as specified and directed. |
| 9 | S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc., complete all as specified and directed. |
| 10 | S&F 2nd class soft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & n.exc 13 sqcm secured with nails or brads, complete all as specified and directed. |
| 11 | M&L for 6mm thick Veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work®, fixed in ceiling incl dismantling of old ceiling boards (fiber pulp, insulation, etc.) or unsulation boards/slabs, any thickness, including cover fillets, complete all as specified and directed. |
| 12 | S&F Plantex Louvers PVC 3D wall panelling of any colour consisting of 10mm thick and 300mm wide fixed on wall/ceiling, installation with U bedding & clips fixing with screw in all corners/sides as per manufacturer instruction dismantling of old boarding/paneling (fiber pulp, insulation, etc.) of any thickness, including cover fillets, complete all as specified and directed. |
| 13 | S&F aluminium anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions incl dismantling of old ceiling boards (fiber pulp, insulation, etc.) or unsulation boards/slabs, any thickness, including cover fillets, complete, all as specified and as directed. |
| 14 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating wall cladding over fixing of Aluminium /MS frame work with GI brackets, ACP fixed on the frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges,complete all as specified and directed.Note : Mode of payment is on finished surface area of ACP sheet. |
| 15 | S&F Venetian Blinds in vinyl material multicolour for windows of any size including required necessary complete fittings complete all as specified and directed. |
| 16 | S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers or 'J' hooks incl dismantling old plain or corrugated steel sheeting, any gauge thickness, complete all as specified and directed |
| 17 | M&L for plain cement concrete 1:2:4 type C-2 (using 40mm graded crushed stone aggregete as in foundation and mass concrete of fixing steel posts or other similar works including demolition of old cement concrete in any description and in any position including removing debries out side MD land, complete all as specified and directed. |
| 18 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in wall, fixed with self tapping screws and washers or 'J' hooks incl dismantling old plain or corrugated steel sheeting, any gauge thickness, complete all as specified and as directed |
| 19 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling old plain sheet of any gauge or thickness, complete all as specified and directed |
| 20 | S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0 or Fe 310-0 including dismantling wrought iron or mild steel work of any position and description, complete all as specified and directed |
| 21 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated in Fe-290 (Gde E165) etc including dismantling wrought iron or mild steel work of any position and description, complete all as specified and directed |
| 22 | S&F Rolled sections or tubular sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Steel Fe 410 -W(Gde-E- 250) quality-A etc incl dismantling wrought iron or mild steel work of any position & description, complete all as specified and directed |
| 23 | M & L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 24 | M&L PBS roll 20 mtr long and 100 cm wide type-III weight 40 Kg per roll (As per sample), complete all as specified and directed. |
| 25 | M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floors finished even and fair, complete all as specified and directed |
| 26 | M&L for Vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors etc. set and jointed in neat cement slury and pointed in white or coloured to match the shade of tiles laid over and including15 mm thick screed bed or bedding layer of cement mortar 1:4 for layig floor finish including dismantling old tiles, complete all as specified and directed. |
| 27 | M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm,as in vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured to match the shade of tilesincluding 10mm thick backing coat 1:3 and including dismantling floor, hearth or wall tiling (but not backing), removing rubbish off the premises, complete all as specified and directed. |
| 28 | M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone slab & tiles, complete all as specified and directed. |
| 29 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation, complete all as specified and directed. |
| 30 | M & L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and fair and applying two coat of distemper oil emulsion, white or tinted over a coat of primer incl taking down old cement plaster on brick or stone walls complete all as specified and directed. |
| 31 | Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed. |
| 32 | Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed. |
| 33 | Taking down shutters of any description n exc 1sqm each, complete all as specified and directed. |
| 34 | Taking down shutters of any description exc 1sqm but n. exc 2 sqm each, complete all as specified and directed. |
| 35 | S&F 2nd class soft wood plain, solid chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and as directed. |
| 36 | S&F 35 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed. |
| 37 | S&F 30mm Flush shutters, factory made with, solid core construction, with block board core and plywood face panels, both faces is covered with decorative faces veneer with lipping/frame to match complete all as specified in SSR Part I, complete all as specified and directed. |
| 38 | S&F 30 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a), complete all as specified and directed . |
| 39 | S&F 25 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and directed . |
| 40 | Taking down wooden panel or gauged shutter of any thickness and size and refixing in same opening after repairing/replacing stile and rails any type and size refixing the iron mongry and steel wire cloth any type etc including painting complete door with one coat of synthetic enamel paint on old surfaces, complete all as specified and directed. |
| 41 | S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 42 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specfied and as directed |
| 43 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 44 | S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and directed |
| 45 | S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm, complete all as specified and directed |
| 46 | S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 47 | S&F 125 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 48 | S&F 150 mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 49 | S&F 125 mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 50 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixin glips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed |
| 51 | S&F in repair Brass Mortice lock 4 levers with handle set, vertical type, size 138mm x 55 mm, complete all as specified and directed. |
| 52 | S&F in repair Aluminium, anodised body Mortice latch 100mm with two levers (vertical type), mild steel body and fixed, complete all as specified and directed. |
| 53 | S&F in repair Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 54 | S & F in repair 140mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring ,fixed in floor, complete as all as specified and directed. |
| 55 | S&F in repair Glass door consisting 10 mm thick toughened glass and mounted on heavy duty floor spring incl all necessary fixing arrangement such as two pair of premium quality stainless steel 450 mm D haped handle (with making holes in the glass before toughening ), Heavy duty stainless steel door lock premium quality incl all necessary required for door fittings & fixtures, complete all as specified and directed. |
| 56 | S & F 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face and other face is white laminated, fixed with screws to timber frame work and wooden leaping alround the shutter. including dismantling old u/s boards of any type complete all as specified and as directed. |
| 57 | S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm, complete all as specified and directed. |
| 58 | S&F magnet catcher for cub board with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 59 | S&F in repair peg set of five stainless steel fixed on CP steel plate including fixing screw as per approved sample, complete all as specified and directed. |
| 60 | Servicing to rooling shutters of size n exc 10 Sqm Each by taking down the rolling shutter cleaning, greesing ,tightening of springs checking all accessories and welding work where ever needed and refixing the rolling shuter to its position and painting complete shutter with one coat of synthetic enamel paint on old surfaces complete all as specified and directed. |
| 61 | S&F in repair Steel rolling shutters 1.25mm thickness of laths with gear operated type with bevel gear box and crank handle and ball bearing, safety lever locks as specified including top cover, anchoring rod, hasp and staple, and painting complete shutter with two coat of synthetic enamel paint oover a coat of primer; erected in position as indicated, complete: push pull or manual type , complete all as specified and directed. |
| 62 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane, complete all as specified and directed |
| 63 | S & F 4 mm thick sheet glass ordinary quality and glazed with oil putty or fixed with beads complete in squares n.exc 0.50 sqm in each pane complete including hacking out old broken glass (any thickness size, quality or description) complete all as specified and directed |
| 64 | S & F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete including hacking out old broken glass (any thickness size, quality or description) complete all as specified and directed |
| 65 | M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 66 | M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
