|
| 1 | Taking out defective pump set of any type, make and capacity by unscrewing the foundation bolts, disconnecting from water connection, and disconnecting from electric motor, opening for inspection in presence of Engr-in-Charge and carry out minor repair at site, in case major repair/replacement of parts not possible at site, the pump shall be shifted to contractor's workshop on his own cost, and re-fixing, re-connecting in position, testing and commissioning complete including replacement of nuts bolts, washers, gasket etc all as specified and as directed for the following sizes :-Note:- Replacement of defective part by new one shall be measured and paid separately under respective items. |
| 2 | 125 HP |
| 3 | 100 HP |
| 4 | 40/50/60 HP |
| 5 | 30/20 HP |
| 6 | Up to 15 HP |
| 7 | Supply only the following items as in repairs suits to the centerifugal pump set of capacity 125HP. |
| 8 | Impeller |
| 9 | Pump shaft |
| 10 | Wear ring S/side |
| 11 | Wear ring D/Side |
| 12 | Casing cover |
| 13 | Gland |
| 14 | Latern ring |
| 15 | Liquid deflector |
| 16 | Bearing Housing |
| 17 | Support foot |
| 18 | Bearing cover DE |
| 19 | Shaft sleeve |
| 20 | Supply only the following items as in repairs suits to the centerifugal pump set of capacity 100 HP. |
| 21 | Impeller |
| 22 | Pump shaft |
| 23 | Wear ring S/side |
| 24 | Wear ring D/Side |
| 25 | Casing cover |
| 26 | Gland |
| 27 | Latern ring |
| 28 | Liquid deflector |
| 29 | Bearing Housing |
| 30 | Support foot |
| 31 | Bearing cover DE |
| 32 | Shaft sleeve |
| 33 | Supply only the following items as in repairs suits to the centerifugal pump set of capacity 60 HP. |
| 34 | Impeller |
| 35 | Pump shaft |
| 36 | Wear ring S/side |
| 37 | Wear ring D/Side |
| 38 | Casing cover |
| 39 | Gland |
| 40 | Latern ring |
| 41 | Liquid deflector |
| 42 | Bearing Housing |
| 43 | Support foot |
| 44 | Bearing cover DE |
| 45 | Shaft sleeve |
| 46 | Supply only the following items as in repairs suits to the centerifugal pump set of capacity 20/30 HP. |
| 47 | Impeller |
| 48 | Pump shaft |
| 49 | Wear ring S/side |
| 50 | Wear ring D/Side |
| 51 | Casing cover |
| 52 | Gland |
| 53 | Latern ring |
| 54 | Liquid deflector |
| 55 | Bearing Housing |
| 56 | Support foot |
| 57 | Bearing cover DE |
| 58 | Shaft sleeve |
| 59 | Supply only the following spares as in repairs for centrifugal pump upto 15 HP :- |
| 60 | Bush bearing made out of bronze. |
| 61 | Shaft sleeve with nuts made out of stainless steel 410 grade. |
| 62 | Re-metaling of shaft by using brass material. |
| 63 | Set of pins and Gaskets made out of Mild Steel. |
| 64 | Coupling set made out of Cast Iron including bolts, nuts, washers & rubber bushes. |
| 65 | Gland box made out of Cast Iron including gland box studs with nuts and washers. |
| 66 | Eye of impeller. |
| 67 | Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions. Balancing the impeller by means of precision lathe machine. |
| 68 | Supply and fixing the following common spare parts suitable for 100/125 HP centrifugal pump set including removing of old unsericeable items :- |
| 69 | Pressure gauge of suitable size. |
| 70 | Vacuum Pressure guage |
| 71 | Air pipe of suitable size & model with copper with proper nut etc. |
| 72 | Air release cock 25mm dia brass. |
| 73 | Air release valve . |
| 74 | Coupling unit with suitable bolt, nuts,washer and rubber bushes. |
| 75 | Disconnectiong existing defective electric motor of any make from electric mains isolating the necked connections, removing from foundation by unscrewing the nuts, bolts etc, discouple from pump, opening of motor for inspection in presence of Engr-in-Charge & carry out minor repairs at site re-assembling the motor after repair, refixing in position re-connecting same as prior to removing from foundation including replacement of nuts, bolts washers of suitable size, testing and commissioning complete all as specified and directed for the following sizes :-.Note :- (a) Replacement of defective parts shall be measured and paid separately as S&F here after. (b) In case of major repairs not possible at site, the motor shall be shifted to contractor’s wksp, and cost of shifting to wksp and back to site included in the rates. |
| 76 | 125 HP |
| 77 | 100 HP |
| 78 | 60 HP |
| 79 | 40 HP |
| 80 | 30 HP |
| 81 | 20 HP |
| 82 | 12.5 HP |
| 83 | 10 HP |
| 84 | Upto 5 HP |
| 85 | Material, labour for rewinding of AC 3 phase/single phase squirriel cage induction motor 415 volt 50Hz of any make, type and capacity with super enameled copper winding wire of same size and guage of F Class/ first quality as per existing complete material like insulation material, fiber glass, fiber sheet, innsulation sheet, varnish, thinner, grease incl burining and removing out old material, cleaning complete and petty items required to make the motor functional as specified by the manufacturer and as directed for the following sizes :- |
| 86 | 1250 HP |
| 87 | 100 HP |
| 88 | 60 HP |
| 89 | 40 HP |
| 90 | 30 HP |
| 91 | 20 HP |
| 92 | 12.5 HP |
| 93 | 10 HP |
| 94 | Upto 5 HP |
| 95 | M & L for renewal of worn out/unserviceable ball bering from the induction motor/pump with same size and capacity complete all as specified and directed for the following :- |
| 96 | Bearing No 3309-A/C3 (Double row) |
| 97 | Bearing No 6309-2Z/C3 (Single row) |
| 98 | Bearing No 6315-2Z/C3 (Single row) |
| 99 | S & F in repair of iron rubber coupling set TC 17/16 (ISI marked) complete all as specified and directed for the follosing sizes:-. |
| 100 | Coupling No TC 15/14 |
| 101 | Coupling No TC 13 |
| 102 | Coupling No TC 11 |
| 103 | Supply only gland packing (ISI marked) complete all as specified and directed for the follwoing sizes :- |
| 104 | Size 8mm |
| 105 | Size 10mm |
| 106 | Size 12mm |
| 107 | Supply only bearing grease suitable for pumpset complete all as specified and directed. |
| 108 | S & F in repair industrial single core PVC insulated round sheathed copper conductor cabe (FRLS) drawn through suitable flexible PVC pipe including all fixing accessories complete all as specified and directed for following sizes :- |
| 109 | 16 Sqmm |
| 110 | 25 Sqmm |
| 111 | 35 Sqmm |
| 112 | 50 Sqmm |
| 113 | 90 Sqmm |
| 114 | M&L for taking out submersible pump set 60/35HP capacity with 100mm/80mm dia MS coloumn pipes from the bore well of depth upto 100 metres for carrying out repairs and lowering the same in position with new rubber washers, nut and bolts suitable for MS coloumn pipe 100mm/80mm dia after carrying out the repairs including testing and commissioning complete all as specified and directed. |
| 115 | Disconnecting electric connections from starter, disconnecting the water connections carefully by unscrewing the nuts, bolts and taking out from well the submersible pump set including column pipes, and submersible cable, disconnecting the pump and motor opening the pump and motor to locate the faults in presence of Engineer-in-Charge, and carry out necessary repairs as directed including transporting to workshop, re-assembling the same after repair, re-connecting all electrical and water connections as per existing complete testing and commissioning including new packing materials,nuts,bolts washers of suitable size, complete all as specified and as directed. Note:- The replacement of parts shall be measured and paid separately under respective items |
| 116 | Material, labour for rewinding of submersible pump with PVC insulated copper winding wire of same size and guage of F Class/ first quality as per existing complete material like insulation material, fiber glass, wooden strick, PVC tape and water proof joint incl burining and removing out old material, cleaning complete and petty items required to make the motor functional as specified by the manufacturer and as directed for the following capacity :- |
| 117 | 60 HP |
| 118 | 20/35 HP |
| 119 | S & F in repair following spare parts for submersible pump and motor upto and including 20/35/60 HP. |
| 120 | GM bearing bush |
| 121 | Rotar sleave |
| 122 | Water seal. |
| 123 | Thrust bearing. |
| 124 | Set of O ring |
| 125 | Cir clip |
| 126 | Connection piece |
| 127 | Sand guard |
| 128 | Sealing ring |
| 129 | Housing upper |
| 130 | Housing lower |
| 131 | Rotar sleave turning & grinding |
| 132 | Rotar end reparing & key way |
| 133 | Flange upper with stud 2 nut |
| 134 | Flange lower with stud 2 nut |
| 135 | Repairing of stamping |
| 136 | Rotar balancing and epoxy paint |
| 137 | Sal bush |
| 138 | Motor base |
| 139 | Cable seal |
| 140 | Thrust plate |
| 141 | Coupling SS |
| 142 | Key for coupling |
| 143 | T Nut |
| 144 | Stud & Nuts for connection piece |
| 145 | Balancing rotar |
| 146 | T bolt |
| 147 | LNK bolt SS |
| 148 | Drain plug |
| 149 | Cable jointing. |
| 150 | Supply, lowering and fixing GI column pipe heavy duty flanged & drilled ISI marked 100mm dia 3 mtr long, GI flanged 12mm thick, slots cutting in flanges for passing of submersible cable incl all jointing matrial such as bolts, nuts, washers & packing sheet and connecting complete all as specified and as diredted for the following sizes :- |
| 151 | 100 mm dia. |
| 152 | 80 mm dia. |
| 153 | Supply and lay submersible copper conductor cable 1100 volts grade PVC insulated flexible, PVC sheathed with multistranded copper conductor cutting to required length connecting with necessary end ferrules / water proof joints of following size including removing the existing unserviceable cable complete all as specified and directed. |
| 154 | 3 Core 16 Sqmm |
| 155 | 3 Core 25 Sqmm |
| 156 | 3 Core 35 Sqmm |
| 157 | S&F 3 pole power contactor confirming to IS, 150 Amps AC 3 rating, 415 volts, 3 pole, type ML-12/HGS-150 with necessary inter connections including removing of the unserviceable contactor, testing and commisioning complete all as specified and directed. |
| 158 | S&F 3 pole power contactor confirming to IS, 50 Amps AC 3 rating, 415 volts, 3 pole, type ML-4/HGS50 with necessary inter connections including removing of the unserviceable contactor, testing and commisioning complete all as specified and directed. |
| 159 | S&F 3 pole power contactor confirming to IS, 25 Amps AC 3 rating, 415 volts, 3 pole, type ML-2/HGS25 with necessary inter connections including removing of the unserviceable contactor, testing and commisioning complete all as specified and directed. |
| 160 | S&F 3 pole power contactor confirming to IS, 18 Amps AC 3 rating, 415 volts, 3 pole, type ML1.5/HGS18 with necessary inter connections including removing of the unserviceable contactor, testing and commisioning complete all as specified and directed. |
| 161 | S&F spare contact kit voltage of 440 volts, 50 cycle confirming to IS, 150 Amps, 3 pole, type ML-12/HGS150 with necessary inter connections suitable for 150 to 200 HP electric motor, testing and commisioning including removing the unserviceable one complete all as specified and directed. |
| 162 | S&F spare contact kit voltage of 440 volts, 50 cycle confirming to IS, 50 Amps, 3 pole, type ML-4/HGS50 with necessary inter connections suitable for 60 HP electric motor, testing and commisioning including removing the unserviceable one complete all as specified and directed. |
| 163 | S&F spare contact kit voltage of 440 volts, 50 cycle confirming to IS, 25 Amps, 3 pole, type ML-2/HGS25 with necessary inter connections suitable for 20 /10 HP electric motor, testing and commisioning including removing the unserviceable one complete all as specified and directed. |
| 164 | S&F mechanincal inter lock unit for voltage of 440 volts, 50 cycle confirming to IS, 150 Amps, 3 pole, type ML-12/HGS150 with necessary inter connections suitable for 150 HP electric motor, testing and commisioning including removing the unserviceable one complete all as specified and directed. |
| 165 | S&F mechanincal inter lock unit for voltage of 440 volts, 50 cycle confirming to IS, 50 Amps, 3 pole, type ML-4/HGS50 with necessary inter connections suitable for 60 HP electric motor, testing and commisioning including removing the unserviceable one complete all as specified and directed. |
| 166 | S&F mechanincal inter lock unit for voltage of 440 volts, 50 cycle confirming to IS, 50 Amps, 3 pole, type ML-2/HGS25-18 with necessary inter connections suitable for 10 to 20 HP electric motor, testing and commisioning including removing the unserviceable one complete all as specified and directed. |
| 167 | S&F for thermal overload relay (auto/manual reset) with built in single phasing prevention (CT Operated), 3 phase of capacity 135-225 Amps, suitable for 3 phase star delta starter, type HGST265, 440 volts with necessary fixing materials including disconnecting and removing the old unserviceable one complete all as specified and directed. |
| 168 | S&F for thermal overload relay (auto/manual reset) with built in single phasing prevention (CT Operated), 3 phase of capacity 52-75 Amps, suitable for 3 phase star delta starter, type HGST100, 440 volts with necessary fixing materials including disconnecting and removing the old unserviceable one complete all as specified and directed. |
| 169 | S&F for thermal overload relay (auto/manual reset) with built in single phasing prevention (CT Operated), 3 phase of capacity 28-40 Amps, suitable for 3 phase star delta starter, type HGST40, 440 volts with necessary fixing materials including disconnecting and removing the old unserviceable one complete all as specified and directed. |
| 170 | S&F for thermal overload relay (auto/manual reset) with built in single phasing prevention (CT Operated), 3 phase of capacity 15-22 Amps, suitable for 3 phase star delta starter, type HGST40, 440 volts with necessary fixing materials including disconnecting and removing the old unserviceable one complete all as specified and directed. |
| 171 | S&F for electronic timer switch ST 100, 240/360/415 volts, Range 3 to 30 sec with mounting kit suitable for old unserviceable ET 100 replacement one complete all as specified and directed. |
| 172 | S&F manually operated oil immersed star delta motor starter, three phase with heavy duty, double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed for the following capacity of motors :- |
| 173 | 41 to 60 HP |
| 174 | 21 to 30 HP |
| 175 | Supply, install, testing and commissioning fully automatic star delta starter, pneumatic timers, single phase preventor, overload relay of range 90 - 150 A for motor capcity 150HP including complete cabling for motors complete all as specified and directed. |
| 176 | Supply, install, testing and commissioning fully automatic star delta starter, pneumatic timers, single phase preventor, overload relay of range 70 - 110 A for for motor 40 to 75 HP motor including complete cabling for motors complete all as specified and directed. |
| 177 | S & F in repair DOL starter with relay range 13 - 20 Amps upto 10 HP motor with necessary connections including removing of the unserviceable contactor, testing and commisioning complete all as specified and directed. |
| 178 | Supply and filling of starter oil for oil immersed starter including draining out the old unserviceable oil complete all as specified and dlirected |
| 179 | Supply and fixing pressure booster pump 0.5 HP, Head range 35 - 60M, discharge range 900-4200LPH, 230V including taking down unserviceable pressure booster pump complete all as specified and directed. |
| 180 | S & F servo control PCB suitable for 500/250/100/50 KVA servo voltage stabilizer, 3 phase including taking down unserviceable servo control PCB complete all as specified and directed. |
| 181 | S & F in repair Digital voltmeter 0-500V complete all as specified and directed. |
| 182 | S & F in repair Digital ampere meter 0-200A complete all as specified and directed. |
| 183 | Supply and topping up of Servo voltage stabilizer oil grade IS : 335 - 2018 Type-II complete all as specified and directed. |
| 184 | DPD Testing Kit to measure residual free chlorine available in water sample, complete all as specified and directed. |
| 185 | Repair of the scrapper mechanism of the Clarifocculator tank of 1.5 lakh gallon capacity by changing coupling, bearing and gear reduction system including motors replacement of capacity from 1 to 5 HP /repairs including welding work to repair the channel of scrapper either the old or by new channel of required size there by making it operational to avoid settling of dust or floating particles on the floor of the tank and proper sturning action for alum mixing, complete all as specified and directed. |
| 186 | S&F MCCB 630 Amps, 4 pole, 415 Volts with rapturing capacity 50 KA with adjustable magnetic and adjustable thermal settings as in repairs, complete all as specified and directed. |
| 187 | S&F MCCB 400 Amps, 3 pole, 415 Volts with rapturing capacity 50 KA with adjustable magnetic and adjustable thermal settings as in repairs, complete all as specified and directed. |
| 188 | S&F MCCB 250 Amps, 4 pole, 415 Volts with rapturing capacity 50 KA with adjustable magnetic and adjustable thermal settings as in repairs complete all as specified and directed. |
| 189 | S&F MCCB 160 Amps, 4 pole, 415 Volts with rapturing capacity 50 KA with Microprocessor settings as in repairs, complete all as specified and directed. |
| 190 | S&F MCCB 125 Amps, 3 pole, 415 Volts with rapturing capacity 50 KA with Microprocessor settings as in repairs,complete all as specified and directed. |
| 191 | S&F MCCB 63 Amps to 100 Amps, 4 pole, 415 Volts with rapturing capacity 50 KA with Microprocessor settings as in repairs, complete all as specified and directed. |
| 192 | S & F in repair COPPER TUBE TERMINAL HEAVY DUTY long barrell for the following sizes :- |
| 193 | 25 sqmm |
| 194 | 50 sqmm |
| 195 | 70 sqmm |
| 196 | 95 Sqmm |
| 197 | Taking out unserviceable terminal plate ( 6 terminal) with connector and outer cover of elect motor of any make, type and supply & connect, testing terminal plate with connector same as per existing complete all as specified and as directed for the following :- |
| 198 | 125 HP |
| 199 | 100 HP |
| 200 | 40/60 HP |
| 201 | 30/20 HP |
| 202 | Upto 15 HP |
| 203 | S & F in repair Spares for Oil immersed star delta starter as per existing complete all as specified and as directed for the following :- |
| 204 | Kit Set Upto 15 HP (Type A) |
| 205 | Kit Set Upto 20 HP to 35 HP (Type B) |
| 206 | Extra Long Life Kit upto 40 HP (Type C |
| 207 | Kit Set BSA(H) |
| 208 | BCSA 50 HP Copper Kit Set |
| 209 | BMD Kit Set (4 X 5 X 3) |
| 210 | Supply and laying pipes ERW steel including specials, as per IS 3589 (1981) 6.00mm thick and including cutting work, welding work complete all as specified and directed for the following sizes :- |
| 211 | 80mm bore. |
| 212 | 100mm bore. |
| 213 | 150mm bore. |
| 214 | 200mm bore. |
| 215 | S & F heavy duty anti vibration pads to mount motor & pumps of various capacity complete all as specified and directed for the following sizes :- |
| 216 | 4 inch |
| 217 | 8 inch |
| 218 | Supply, Installation, Testing and Commissioning of Mechanical Seals by modifying the stuffing box in 100HP split casing pump set and retrofitting of mechanical seal (One seal) for ambient water application of bellow type with complete cartridge and seal faces of C/SIC face combination, secondary seal in viton along with gland plate incl taking down existing gland packing with stuffing box setup complete als as specified and directed. |
| 219 | Material and labour for fabrication of base frame with MS Chanel 60x60, 8mm thick for foundation of centrifugal pump set incl one coat of red oxide and two coat of black enamel paint and incl taking out old base frame and grouting new one existing with all nuts and bolts all as specified and as directed. |
| 220 | S&F in replacement of CI raising spindle type sluice valve both ends flanged with CI body, ISI marked, IS 14846, pressure PN 1.6 with SS spindle with clamps and check nuts, operating hand wheel complete all as specified and directed for the following sizes:- |
| 221 | 100 mm bore. |
| 222 | 150 mm bore. |
| 223 | M & L CI non return valve without by pass arrangement confirming to IS-5312 part-I, PN 1.6 including nuts, bolts, washers and gaskets including taking out old UNSV NRV complete all as specified for the following sizes :- |
| 224 | 80mm dia. |
| 225 | 100 mm dia |
| 226 | 150 mm dia |
| 227 | Supply and fix \\"MS flange as per ASA 150# \\" of thickness not less than 12mm inculding welding work as required at site complete all as required and as directed for the following sizes :- |
| 228 | 80 mm dia |
| 229 | 100 mm dia |
| 230 | 150 mm dia |
| 231 | 200 mm dia |
| 232 | Supply only Flange rubber gasket complete all as required and as directed for the following sizes :- |
| 233 | 80 mm dia |
| 234 | 100 mm dia |
| 235 | 150 mm dia |
| 236 | 200 mm dia |
| 237 | Supply only MS nut bolts as per site requirement complete all as specified and directed. |
| 238 | M&L for taking out water sample in clean container from variuos locations i.e Trated water from UG sumps /borewell /Raw water from Jhelum and getting the same tested from the Govt approved laboratory for bacteriological and chemical test complete all as specified and directed |
| 239 | M & L DI ball type foot valve flanged end confirming working pressure PN 1.6 MPa wih epoxy coating including nuts, bolts, washers and gaskets including taking out old UNSV foot valve complete all as specified for the following sizes :- |
| 240 | 100 mm dia |
| 241 | 150 mm dia |
| 242 | Notes :-An amount of Rs 1,90,605.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
