|
| 1 | Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and as directed. |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. |
| 3 | Removing excavated soils bit exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed. |
| 4 | Supply and fixing pipe galvanised medium grade with all fittings such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc laid in trenches/or ground complete including all fittings and taking down old unserviceable pipe of following sizes : |
| 5 | 80mm bore |
| 6 | 50mm bore |
| 7 | 40mm bore |
| 8 | 25mm bore |
| 9 | 20mm bore |
| 10 | 15mm bore |
| 11 | Cutting the existing CI/DI pipes and reducing to required length for inserting of new CI specials complete for the following :-Note : Earth work will be measured and paid seperately. |
| 12 | 200mm bore alongwith supply and fixing CI tee of size 200mmx200mmx80mm |
| 13 | 150mm bore alongwith supply and fixing CI tee of size 150mmx150mmx80mm |
| 14 | Supply and fixing sluice valve PN 1.6 ISI marked with and including jointing material and taking out old unserviceable valves complete all as specified and directed of 80mm bore. |
| 15 | Supply and fixing of Gun metal globe/gate valve ISI marked with and including jointing material and taking out old unserviceable valves complete all as specified and directed of following sizes :- |
| 16 | 50mm bore |
| 17 | 40mm bore |
| 18 | 25mm bore |
| 19 | 20mm bore |
| 20 | 15mm bore |
| 21 | Construction of brick masonry valve pit in repairs of including excavation and earthwork in any type of soil, PCC 1:4:8 type D-2 in foundation, brickwork in cement mortar 1:4, 15mm thick cement mortar 1:4 and flush pointing externally in same mortar as the work proceeds, angle iron frame 40mm x 40mm x 6mm with 3mm thick MS sheet as top cover with 12mm thick thick MS handle, two hinges on one side of top cover and locking arrangement on other side (including lock and two keys) and two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | 600mm x 600m x600mm (Internal dimension of chamber) |
| 23 | Material and labour for lagging to pipes used in internal/external water supply pipe lines all round with 25mm thick bonded mineral wool performed \\"SNAPON\\" pipe sections of density 144 Kg/Cum conforming to IS 9842 complete all as specified and directed by Engr-in-Charge of following sizes :- |
| 24 | 80mm bore |
| 25 | 50mm bore |
| 26 | 40mm bore |
| 27 | 25mm bore |
| 28 | 20mm bore |
| 29 | 15mm bore |
| 30 | Material and labour for Aluminium cladding of 26 gauge over the insulation complete all as specified and directed by Engr-in-Charge of following sizes :- |
| 31 | 80mm bore |
| 32 | 50mm bore |
| 33 | 40mm bore |
| 34 | 25mm bore |
| 35 | 20mm bore |
| 36 | 15mm bore Please Enable Macros to View BoQ information |
| 37 | 15mm bore Please Enable Macros to View BoQ information |
