|
| 1 | Providingand Fixing Geared Sluice Valve (with Cap) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (500 mm i/d) |
| 2 | Providing and Fixing Geared Sluice Valve (with Cap) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion in all respect as per stisfaction of Engineer-in-charge (400mm i/d) |
| 3 | Providing and Fixing Geared Sluice Valve (with Cap) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (300 mm i/d) |
| 4 | Providing and Fixing Geared Sluice Valve (with Cap) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (250 mm i/d) |
| 5 | Providing and Fixing Geared Sluice Valve (with Cap) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (200 mm i/d) |
| 6 | Providing and Fixing Geared Sluice Valve (with Cap) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (150 mm i/d) |
| 7 | Providing and Fixing Geared Sluice Valve (with Cap) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (100 mm i/d) |
| 8 | Providing and Fixing Dual plate check valve of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (500 mm i/d) |
| 9 | Providing and Fixing Dual plate check valve of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (400 mm i/d) |
| 10 | Providing and Fixing Dual plate check valve of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (300 mm i/d) |
| 11 | Providing and Fixing Dual plate check valve of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (250 mm i/d) |
| 12 | Providing and Fixing Dual plate check valve of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (200 mm i/d) |
| 13 | Providing and Fixing Dual plate check valve of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (150 mm i/d) |
| 14 | Providing and Fixing Dual plate check valve of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (100 mm i/d) |
| 15 | Providing and Fixing Air Valve (Standard CI) of make IVC/VAG including cost of bolts, nuts, rubberrings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (100 mm i/d) |
| 16 | Providing and Fixing Air Valve (Standard CI) of make IVC/VAG including cost of bolts, nuts, rubberrings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (80 mm i/d) |
| 17 | Providing and Fixing Dismantling joint 500mm i/d including cost of bolts, nuts, rubber rings, insertioncomplete in all respect as per satisfaction of Engineer-in-Charge (500 mm i/d) |
| 18 | Providing and Fixing Dismantling joint 400mm i/d including cost of bolts, nuts, rubber rings, insertioncomplete in all respect as per satisfaction of Engineer-in-Charge (400 mm i/d) |
| 19 | Providing and Fixing Dismantling joint 300mm i/d including cost of bolts, nuts, rubber rings, insertioncomplete in all respect as per satisfaction of Engineer-in-Charge (300 mm i/d) |
| 20 | Providing and Fixing Dismantling joint 250mm i/d including cost of bolts, nuts, rubber rings, insertioncomplete in all respect as per satisfaction of Engineer-in-Charge (250 mm i/d) |
| 21 | Providing and Fixing Dismantling joint 200mm i/d including cost of bolts, nuts, rubber rings, insertioncomplete in all respect as per satisfaction of Engineer-in-Charge (200 mm i/d) |
| 22 | Providing and Fixing Dismantling joint 150mm i/d including cost of bolts, nuts, rubber rings, insertioncomplete in all respect as per satisfaction of Engineer-in-Charge (150 mm i/d) |
| 23 | Providing and Fixing Dismantling joint 100mm i/d including cost of bolts, nuts, rubber rings, insertioncomplete in all respect as per satisfaction of Engineer-in-Charge (100 mm i/d) |
| 24 | Providing and Fixing Mechnical joint 500mm i/d including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (500 mm i/d) |
| 25 | Providing and Fixing Mechnical joint 400mm i/d including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (400 mm i/d) |
| 26 | Supply, erection, testing and commissioning of horizontal spindle split casing type pumping sets of followingduties directly coupled to AC Squirrel cage induction type motor with starter and acessoried etc. complete in allrespects all priming arrangement (Raw water horizontal Split casing pumps 215 BHP of water at 108 mtr. Head, 5050 LPM) |
| 27 | Supply, erection, testing and commissioning of horizontal spindle split casing type pumping sets of followingduties directly coupled to AC Squirrel cage induction type motor with starter and acessoried etc. complete in allrespects all priming arrangement (Raw water horizontal Split casing pumps 100 BHP of water at 50 mtr. Head, 6200 LPM) |
| 28 | Supply, erection, testing and commissioning of centrifugal Submerged pumpset including end suctionenclosed impeller and volute casing etc. complete in all respects all priming arrangement (Raw Water Centrifugal Submerged Pumpset 25 BHP of water at 20 mtr. Head, 2200 LPM) |
| 29 | Supply and erection of Stranded, XLPE Insulated LT ALUMINIUM CONDUCTOR armound cable withgalvanised steel strip Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988\ complete in all respect as per satisfaction of Engineer-in-Charge (500sqmx3.5core Aluminium Armored Cable) |
| 30 | Supply and erection of Stranded, XLPE Insulated LT ALUMINIUM CONDUCTOR armound cable with\galvanised complete in steel all strip Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 respect as per satisfaction of Engincer-in-Charge (95sqmx3core Copper Armored Cable) |
| 31 | Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes ofClass K - 9 conforming to IS : 8329 : DI D/F Pipe 500mm |
| 32 | Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes ofClass K - 9 conforming to IS : 8329 : DI D/F Pipe 400mm |
| 33 | Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes ofClass K - 9 conforming to IS : 8329 : DI D/F Pipe 350mm |
| 34 | Supply, erection, testing and commissioning of monoblock vacuum pump with starter, acessories, Panel, Cableand Pipe and Firttings etc. complete in all respects all priming arrangement : Dewatering Pump 5 HP |
| 35 | Providing Fixing Led light of 50watt (Syska, Havells, Philips make) |
| 36 | Providing Fixing Led light of 9watt (Syska, Havells, Philips make) |
| 37 | wall fan of size Sweep 40 cm (400 mm) Speed 1280 rpmPower Input 55 W |
| 38 | Providing and construction of steel fabricated Truss Bridge of 1.8M carriageway of 4.0 M clear height, pipe supporting structure with RCC abutments, wing wall, approach, RCC piers, saddle support, cheqerred plates on River Krishnavati for carrying 500mm i/d DI Raw water supply main as per details in DNIT. |
| 39 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length fixed on existing angle iron `Y` shaped placed 2.4 m or 3.00 m apart with 5 horizontal R.B.T. reinforced barbed wire, studtied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) |
| 40 | Provision for probe radar survey to check any underground obstruction before finalizing the alignment complete in all respect as per approved. |
| 41 | Providing concrete block 1:1-1/2:3 on both ends to plug the annular space between casing and carrier pipe complete in all respect |
| 42 | Providing and Fixing Air Valve (Standard Cl) of make IVC/VAG including cost of bolts, nuts, rubber rings, insertion complete in all respect as per satisfaction of Engineer-in-Charge (150 mm i/d) |
| 43 | WTP: Design and construction of 3.5 MLD capacity automated PLC controlled water treatment plantincluding providing and laying the DI/CI pipes, specials,sluice valves from inlet chamber of WTP to inter connecting piping network in WTP (The cost of these DI/CI pipes, valves and specials shall also be included in the rates quoted by the contractor) along with inlet chamber, Alum dozing, Flash mixing, Clariflocculator, filter box, over head Reservoir for back wash and waste water tank with suitable size pumping sets and panel boards, air scour equipment, chemical house with chlorination equipments, all other civil, mechanical,electric installations complete in all respects as perspecifications (make of Sluice valves /NRV: IVC/VAG/ Kirlosker) : 3.5 MLD |
| 44 | Supply, erection, testing and commissioning of Dewatering pump with starter and acessoriee, Panel, Cable andPipe and Fittings etc. complete in all respects allpriming arrangement : Dewatering Pump 3 HP |
| 45 | Supply, erection, testing and commissioning of Dewatering pump with starter and acessoriee, Panel, Cable andPipe and Fittings etc. complete in all respects all priming arrangement : Dewatering Pump 5 HP |
| 46 | Supply and erection of Stranded , XLPE Insulated LT COPPER CONDUCTOR armound cable with galvanisedsteel strip Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 \ completein all respect as per satisfaction of Engineer-in-Charge (400sqmx3core Copper Armored Cable) |
| 47 | NS Item -Designing, Supply and erection of DG set of eapacity complying to CPCBIV plus norms with noise controlled devices acoustic enclosure of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator close coupled on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF/ Sync panel, making 2nd incoming cable connection from transformer, outgoing outgoing cable cable connection connection from changeover/ standard panel, making second incoming cable connection from transformer, DG sets complete as per following from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for The rating should be at 1500 RPM. detailed scope and specifications and directions of Engineer-in-charge. a) Diesel Engine b) Alternator c) Battery 12/24 V. d) Base Plate. e) suitable sq mm suitable core copper cable upto 40 metres. f) Tools, standard panel frequency g) Metering meter 415 VAC-1 Indications set in build in Microprocessor with Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, with suitable CT`s) h) Metering set 60/5A/110V (Amp. Meter, Volt Meter) in Microprocessor i) Overload protection for DC-1 No.j) Battery Charger 12/24V DC k)Copper bus bar of suitable sizeI) KWH meter m) Starting fuse button and switch on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge. (1010 KVA.) |
| 48 | NS Item -Designing, Supply and erection of DG set of eapacity complying to CPCBIV plus norms with noise controlled devices acoustic enclosure of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator close coupled on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF/ Sync panel, making 2nd incoming cable connection from transformer, outgoing outgoing cable cable connection connection from changeover/ standard panel, making second incoming cable connection from transformer, DG sets complete as per following from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for The rating should be at 1500 RPM. detailed scope and specifications and directions of Engineer-in-charge. a) Diesel Engine b) Alternator c) Battery 12/24 V. d) Base Plate. e) suitable sq mm suitable core copper cable upto 40 metres. f) Tools, standard panel frequency g) Metering meter 415 VAC-1 Indications set in build in Microprocessor with Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, with suitable CT`s) h) Metering set 60/5A/110V (Amp. Meter, Volt Meter) in Microprocessor i) Overload protection for DC-1 No.j) Battery Charger 12/24V DC k)Copper bus bar of suitable sizeI) KWH meter m) Starting fuse button and switch on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge. (320 KVA.) |
| 49 | Providing and fixing of suitable floating arm of Fibre metalled and all nuts and bolt SS 304 along with swing bend as per required specifications approved by Engineer-in-charge. (400 MM) complete in all respects |
| 50 | Supply, erection, testing and commissioning of monoblock vacuum pump with starter, accessories including Panel, Cable ,Pipe etc complete fittng in all respects to fullfill the site requirement Vacuum Pumps 3 HP. |
| 51 | NS Item -AUTOMETIC POWER FACTOR CONTROL PANEL Supply erection testing and commissioning of Automatic Power Factor control panel as per required capacitor complete with digital screen and including Distribution Panel, ACB as required as per site Condition, Coupler, DG Change over specification mentioned in the as per approved DNIT. |
| 52 | Providing and fixing pressure gauge 6` dia 0-20 kg/sqcm as per site required complete in all respect. |
| 53 | HT Panel -Supply Indoor Type 11KV VCB Control Cubical Panel with vertical Isolation Type Breaker as per Relevant IS as amended up to Date and Additional Specifications, having Capacities as Mentioned Below, Single break trip free mechanism, manually charged and Auto/Manually closing breaker suitable for use on 11kv, 3 phase 50hz AC, Supply with short circuit fault level of 800 Amps Capacity, breaker featured with local ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 2NO plus 2NC and equipped with following switchgears and accessories including making suitable structure (such as G.O switch, H Pole and HT cable of required capacity etc. complete in all respect as per site requirement arrangement for installation, control wiring and connections etc. as reqd. (1 IC plus 2 OG) a). VCB, 11KV, 800Amp, 50KA. b). 1ph 11KV/110 Volts PT (indoor type) Class 0.2 Accuracy and 100 VA burden -3 no`s. c). 33KV indoor dead type dual core dual ratio 3CTs of ratio 200-100/5-5 A of 15 VA burden, PS 5 P10 and accuracy class 0.2. d). Control panel- Cubicle type control panel suitable for floor mounting made out of 1.63 mm CR sheet duly powder coated and with following relays. e). Microprocessor based numerical relay for O/L, E/F and SC Protection suitable for above. f). Master trip relay -2 no`s. g). Indicator type Annunciator panel with buzzer. h). Digital Volt Meter-0-11 KV. 1). Digital Amp Meter-0-100 Amp. j). RYB/ Trip/Closing/Spring charged indicator lamp. k). Fault Annunciator panel for O/L, WTI, OTI and Buchhloz Relay Alarm And Trip Auxiliary relay. 1) TNC Switch for Operation. m) Multifunction Meter EM6400NG. n) TCS Relay for Safety..... |
| 54 | ELECTROMAGNETIC FLOW METER AS PER VENDOR LIST and SPECIFICATION AS DEFINE UNDER APPROVED NIT: LINE SIZE : 150 MM LINE: PTFE DISPLAY: DIGITAL MOUNTING: INTEGRAL MEDIUM: WATER TEMPERATURE RANGE: plus 5°C to plus 35°C OPERATING PRESSURE: 0.1 TO 15 BAR PROCESS TEMPERATURE: -40°C TO plus 120°C (PTFE/PFA, COMPACT VERSION) MEASUREMENT PRINCIPLE: ELECTROMAGNETIC MATERIAL: DIE-CAST ALUMINUM (STANDARD), STAINLESS STEEL (OPTIONAL) CONNECTION BOX: ONLY FOR REMOTE VERSIONS PRODUCT FAMILY: OPTIFLUX FOR USE WITH: IFC 050, IFC 100, and including inbuilt dual Sim (4G/5G), LCD display with flow direction, forward and reverse flow rate, cumulative forward flow, device name etc, accuracy shall be as per ISO 4064, class private access on desktop and mobile, secure cloud (Cloud based software comprising of Middle ware, Database and Front-end web interface through suitable Dashboards, Aggregation screens and GIS assisted drill-down from macro to micro to be provided. Application data hosting. Cloud services of Ministry of Electronics and Information Technology (Meity), Government of India empaneled cloud service providers shall be taken. Cloud service provider must adhere the security standards and guidelines issued by Meity from time-to-time. As the data belongs to the State Government of Haryana, therefore the application and data hosted on Cloud must be kept and stored in data centers located in India only. Any change in application requirement or infrastructure shall be borne by the Implementation agency. Implementation agency shall carry out the Application Security Audit from a Certified Auditor (CA). Application and data shall be kept confidential and only the authorized users shall have the access to it. Implementation Agency shall be responsible for any data theft or data leakages.) (INLINE FLANGE TYPE) |
| 55 | ELECTROMAGNETIC FLOW METER AS PER VENDOR LIST and SPECIFICATION AS DEFINE UNDER APPROVED NIT: LINE SIZE : 200 MM LINE: PTFE DISPLAY: DIGITAL MOUNTING: INTEGRAL MEDIUM: WATER TEMPERATURE RANGE: plus 5°C to plus 35°C OPERATING PRESSURE: 0.1 TO 15 BAR PROCESS TEMPERATURE: -40°C TO plus 120°C (PTFE/PFA, COMPACT VERSION) MEASUREMENT PRINCIPLE: ELECTROMAGNETIC MATERIAL: DIE-CAST ALUMINUM (STANDARD), STAINLESS STEEL (OPTIONAL) CONNECTION BOX: ONLY FOR REMOTE VERSIONS PRODUCT FAMILY: OPTIFLUX FOR USE WITH: IFC 050, IFC 100, and including inbuilt dual Sim (4G/5G), LCD display with flow direction, forward and reverse flow rate, cumulative forward flow, device name etc, accuracy shall be as per ISO 4064, class private access on desktop and mobile, secure cloud (Cloud based software comprising of Middle ware, Database and Front-end web interface through suitable Dashboards, Aggregation screens and GIS assisted drill-down from macro to micro to be provided. Application data hosting. Cloud services of Ministry of Electronics and Information Technology (Meity), Government of India empaneled cloud service providers shall be taken. Cloud service provider must adhere the security standards and guidelines issued by Meity from time-to-time. As the data belongs to the State Government of Haryana, therefore the application and data hosted on Cloud must be kept and stored in data centers located in India only. Any change in application requirement or infrastructure shall be borne by the Implementation agency. Implementation agency shall carry out the Application Security Audit from a Certified Auditor (CA). Application and data shall be kept confidential and only the authorized users shall have the access to it. Implementation Agency shall be responsible for any data theft or data leakages.) (INLINE FLANGE TYPE) |
| 56 | ELECTROMAGNETIC FLOW METER AS PER VENDOR LIST and SPECIFICATION AS DEFINE UNDER APPROVED NIT: LINE SIZE : 400 MM LINE: PTFE DISPLAY: DIGITAL MOUNTING: INTEGRAL MEDIUM: WATER TEMPERATURE RANGE: plus 5°C to plus 35°C OPERATING PRESSURE: 0.1 TO 15 BAR PROCESS TEMPERATURE: -40°C TO plus 120°C (PTFE/PFA, COMPACT VERSION) MEASUREMENT PRINCIPLE: ELECTROMAGNETIC MATERIAL: DIE-CAST ALUMINUM (STANDARD), STAINLESS STEEL (OPTIONAL) CONNECTION BOX: ONLY FOR REMOTE VERSIONS PRODUCT FAMILY: OPTIFLUX FOR USE WITH: IFC 050, IFC 100, and including inbuilt dual Sim (4G/5G), LCD display with flow direction, forward and reverse flow rate, cumulative forward flow, device name etc, accuracy shall be as per ISO 4064, class private access on desktop and mobile, secure cloud (Cloud based software comprising of Middle ware, Database and Front-end web interface through suitable Dashboards, Aggregation screens and GIS assisted drill-down from macro to micro to be provided. Application data hosting. Cloud services of Ministry of Electronics and Information Technology (Meity), Government of India empaneled cloud service providers shall be taken. Cloud service provider must adhere the security standards and guidelines issued by Meity from time-to-time. As the data belongs to the State Government of Haryana, therefore the application and data hosted on Cloud must be kept and stored in data centers located in India only. Any change in application requirement or infrastructure shall be borne by the Implementation agency. Implementation agency shall carry out the Application Security Audit from a Certified Auditor (CA). Application and data shall be kept confidential and only the authorized users shall have the access to it. Implementation Agency shall be responsible for any data theft or data leakages.) (INLINE FLANGE TYPE) |
| 57 | ELECTROMAGNETIC FLOW METER AS PER VENDOR LIST and SPECIFICATION AS DEFINE UNDER APPROVED NIT: LINE SIZE : 500 MM LINE: PTFE DISPLAY: DIGITAL MOUNTING: INTEGRAL MEDIUM: WATER TEMPERATURE RANGE: plus 5°C to plus 35°C OPERATING PRESSURE: 0.1 TO 15 BAR PROCESS TEMPERATURE: -40°C TO plus 120°C (PTFE/PFA, COMPACT VERSION) MEASUREMENT PRINCIPLE: ELECTROMAGNETIC MATERIAL: DIE-CAST ALUMINUM (STANDARD), STAINLESS STEEL (OPTIONAL) CONNECTION BOX: ONLY FOR REMOTE VERSIONS PRODUCT FAMILY: OPTIFLUX FOR USE WITH: IFC 050, IFC 100, and including inbuilt dual Sim (4G/5G), LCD display with flow direction, forward and reverse flow rate, cumulative forward flow, device name etc, accuracy shall be as per ISO 4064, class private access on desktop and mobile, secure cloud (Cloud based software comprising of Middle ware, Database and Front-end web interface through suitable Dashboards, Aggregation screens and GIS assisted drill-down from macro to micro to be provided. Application data hosting. Cloud services of Ministry of Electronics and Information Technology (Meity), Government of India empaneled cloud service providers shall be taken. Cloud service provider must adhere the security standards and guidelines issued by Meity from time-to-time. As the data belongs to the State Government of Haryana, therefore the application and data hosted on Cloud must be kept and stored in data centers located in India only. Any change in application requirement or infrastructure shall be borne by the Implementation agency. Implementation agency shall carry out the Application Security Audit from a Certified Auditor (CA). Application and data shall be kept confidential and only the authorized users shall have the access to it. Implementation Agency shall be responsible for any data theft or data leakages.) (INLINE FLANGE TYPE) |
| 58 | Providing, fixing and commissioning of LT Panel Board of 16 SWG CRCA sheet duly scouted with suitable angle iron frame work and completely powder coated of approximate size as per requirement:1.MCCB 320 amp TP 36 KA DN3 1no of make LandT 2 Spreader link TP DN3 1no of make LandT 3 Extended rotary handle DN3 1no of make LandT4 Volt meter digital 1 no of make Trinity 5 Volt selector switch 1 no of make LandT 6 Amp meter digital with 1 No. C.T 1 no of make Trinity 7 Phase Indication R,Y,B 3 no of make Essen 8 Auxilary contact 2 NO plus 2 NC 2no of make LandT 9 SPP 1 no of make LandT 10 Timer 1no of make EAPL 11 Control MCB 6 amp SP 1 no of make LandT 12 Contactor MNX 300 1 no of make LandT 13 Contactor MNX 185 1 no of make LandT 14 Contactor MNX 95 1no of make LandT 15 O/L relay 90 -_ -150 amp (MN12 C.T opreated) 1no of make LandT 16 ATS for (6200 LPM x 50 mtr Head x 100 BHP) 17 Pushbutton red plus green with element 2 no of make LandT 18 Indicator ON,OFF,TRIP 3no of make Essen Fabrication with Aluminum Bus bar power and Control wiring labour and margin |
| 59 | Providing, fixing and commissioning of LT Panel Board of 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size as per requirement: 1 MCCB 630 amp TP 36 KA DN3 1 no of make LandT 2 Spreader link TP DN3-630A 1 no of make LandT 3 Extended rotary handle DN3 1no of make LandT 4 Volt meter digital 1 no of make Trinity 5 Volt selector switch 1no of make LandT 6 Phase Indication R,Y,B 3 no of make Essen 7 Auxilary contact 2 NO plus 2 NC 1 no of make LandT 8 SPP 1no of make LandT 9 Timer 1no of make EAPL 10 Control MCB 6 amp SP 1 no of make LandT 11 Contactor MNX 550 1 no of make LandT 12 Contactor MNX 250 1 no of make LandT 4 13 Contactor MNX 140 1no of make LandT 14 O/L relay 270 -_ 450 amp (MN12 C.T opreated) 1no of make LandT 15 ATS for 5050 lpm x 108 mtr head x 215 BHP 16 Pushbutton red plus green with element 2 no of make LandT 17 Indicator ON, OFF,TRIP 3 no of make Essen 18 Control MCB SP 6 amp 1 no of make LandT 19 Amp meter digital with 1 No. C.T 1 no of make Trinity Fabrication with Aluminium Bus bar power and Control wiring labour and margin |
| 60 | Boaring by HDD: Horizontal boaring of size 800mm i/d of thickness 20mm by augar boaring machine by trenchless technology complete in all respect. MS PIPE: Providing, insertion, of 800 mm i/d MS Casing Pipe having thickness of 20 mm including cutting, joint including and radiographycally welding of MS pipe with coating on inner and outer side of pipe with built oxypaint of thickness 250 micron complete in all respect |
| 61 | Boaring by HDD: Horizontal boaring of size 500mm i/d of thickness 20mm by augar boaring machine by trenchless technology complete in all respect. MS PIPE: Providing, insertion, of 500 mm i/d MS Casing Pipe having thickness of 20 mm including cutting, joint including and radiographycally welding of MS pipe with coating on inner and outer side of pipe with built oxypaint of thickness 250 micron complete in all respect |
| 62 | Providing and insertion of 250 mm i/d MS Carrier Pipe having thickness of 12.5 mm including cutting, joint including and radiographycally welding of MS pipe with coating on inner and outer side of pipe with built oxypaint of thickness 250 micron and complete in all respect.Providing and fixing HDPE spacer to be fitted in MS casing pipe of size 500mm i/d and carrier pipe of size 250mm i/d complete job including labour charge of material to site of work complete in all respect as per satisfaction of Engineer-in -charge. |
| 63 | Providing and insertion of 500 mm i/d MS Carrier Pipe having thickness of 16 mm including cutting, joint including and radiographycally welding of MS pipe with coating on inner and outer side of pipe with built oxypaint of thickness 250 micron and complete in all respect.Providing and fixing HDPE spacer to be fitted in MS casing pipe of size 800mm i/d and carrier pipe of size 500mm i/d complete job including labour charge of material to site of work complete in all respect as per satisfaction of Engineer-in -charge. |
| 64 | Operation and maintenance for complete scope of work mentioned in DNIT i.e Design, construction, commissioning and testing Proposed water works Musnota (3.5 MLD WTP) complete in all respect, Construction of additional Structures at existing water works Nangal Dargu and Construction of Raw water lifting Pumping Stations at proposed W/W site at Nangal Choudhary and its Raw water Rising Mains etc. complete scope of work under this contract as per schedule –IV for a period of 06 Years defect liability cum Operation and Maintenance period (After Successful completion of 3 Months Trial run Period) on terms as per letter issued by Project Director Haryana (HEWP) vide memo no. 11296-11352/HEWP dated 10/02/2026 complete in all respect as per approved DNIT (Will be Charged to the A/Mtc estimate). |
| 65 | HSR Itmes(As per uploaded DNIT) Please Enable Macros to View BoQ information |
