|
| 1 | Supply, installation, testing and commissioning of pre-wired LED street light with pressure die cast housing and secondary lens delivering lumen level not less than 3600lumens and not more than 30W power, IP66 protection and 4kV inbuilt surge protection, THD<10%, PF>=0.95, 5700K pure white, conforms to IS 10322 Part 5 complete, including necessary interconnections and Earthing as required. (Approved makes: Bajaj/Philips/Havells/Crompton) |
| 2 | On Octagonal Pole |
| 3 | On a steel structure with necessary welding and complete in all respects |
| 4 | Supply and installation of a 3-meter-high Hot Dip Galvanized (HDG) octagonal pole made out of 3 mm thick hot rolled steel sheet having 130 mm bottom A/F and 70 mm top A/F, provided complete with a base plate of size 200 mm × 200 mm × 16 mm thick. The pole shall be erected on RCC foundation of mix 1:1.5:3 (1 cement : 1.5 coarse sand Zone-III : 3 graded stone aggregate of 20 mm nominal size) including necessary foundation bolts, excavation, centering, shuttering, strutting, propping, placing in position and curing etc. complete. The work includes providing and placing Thermo-Mechanically Treated (TMT) reinforcement bars of grade Fe-500D or higher, including straightening, cutting, bending, binding and placing in position for RCC work upto plinth level, as per the pole manufacturer’s recommendations.The item shall also include:1. Excavation and refilling of foundation pit2. Finishing of foundation3. Providing and fixing 6A DP MCB inside suitable enclosure4. Providing 3 Core × 1.5 sq.mm flexible PVC insulated copper cable for interconnection between luminaire and MCB.5. GI sheet for cable gland mounting6. Proper earthing arrangement7. Two coats of epoxy primer and epoxy paint (Aluminium grey)All necessary civil and electrical accessories to complete the work in all respects as per pole manufacturer’s recommendation and as directed by Engineer-in-Charge.(Approved makes: Pole: Bajaj/RR Ispat/CromptonMCB: Legrand/L&TCable: Polycab/RR Kabel/Finolex/Havells) |
| 5 | With 0.5mtr long hot dip galvanised standard type Single armbracket made up of 40NB dia GI pipe suitable to mount on polehaving top 70mm A/F.(Approved makes: Bajaj/RR Ispat/Crompton) |
| 6 | With 1mtr long hot dip galvanised standard type Double armbracket made up of 40NB dia GI pipe suitable to mount on pole having top 70mm A/F.(Approved makes: Bajaj/RR Ispat/Crompton) |
| 7 | Supply of FRLS XLPE power cable of 1.1 kV grade of following size as required.(Approved makes: Polycab/RR Kabel/Finolex/Havells) |
| 8 | 3C x 2.5 sqmm copper unarmoured cable |
| 9 | Supplying and fixing the following sizes of medium class PVC conduit, along with accessories in surface/recess, including cutting the wall and making good the same in case of recessed conduit asrequired.(Approved makes: Precision/Polycab/AKG/Finolex/Avon plast) |
| 10 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 11 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 12 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC HUME/ METAL/DWC/ HDPE pipe as required. |
| 13 | Upto 35 sq. mm |
| 14 | Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE Ar. copper conductor cable of 1.1kV grade as requiredApproved Makes: Dowells/Jainson/Raychem/Commet |
| 15 | 3core X 2.5 sq. mm(19mm) Please Enable Macros to View BoQ information |
