|
| 1 | Providing and fixing decorative lighting work all complete as per direction of engg in charge |
| 2 | Fixing existing water fountain all complete upto workable condition as per direction Of eng in charge. |
| 3 | Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 meters lead as per direction of Engineer-in-charge. |
| 4 | Earth work in excavation for foundation, trenches forpipes / cables or drains etc. by mechanical means /manual means (exceeding 30cm in depth.) includingramming of bottom, dressing of sides, disposal of excavatedearth including of all lift and lead upto 50m. Disposed earthto be levelled and neatly dressed.All kinds of soil |
| 5 | Supplying and filling in plinth under floors including,watering, ramming consolidating and dressing complete. Moorum/Hard copra |
| 6 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering All work up to plinthlevel. Cement concrete grade M-10 (Nominal Mix) with 20 mm maximumsize of stone aggregate |
| 7 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate. |
| 8 | Centering and shuttering including strutting, propping stretching etc.complete for and removal of form work by sheet plate or ply woodshuttering for : Walls (any thickness) including attached pilasters, butteresses, plinthand string courses etc |
| 9 | Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and string courses,fillets, columns, pillars, piers, abutments, posts and struts etc.aboveplinth level and up to floor two level excluding cost of centering,shuttering and reinforcement etc.Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate |
| 10 | Providingandfixing40mmthickredstoneslaboverdrainsincludingPointingin cement mortar 1:3 (1 cement : 3 sand) |
| 11 | Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works. |
| 12 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding upto floor level including costof binding wire, wastage and over laps upto 12mm horizontal/ inclinedposition of reinforcement bars in slab and beams, plinth, chajjas,lintels, upto 4.5m vertical length of reinforcement in wall columns (overlaps shall be provided as per requirement of IS : 13920; IS 456 & SP :34) etc. complete.Mild steel and Medium Tensile steel bars. |
| 13 | Providing and fixing stainless steel ( Grade 304) railing made ofHollow tubes, channels, plates etc. including welding, grinding,buffing, polishing and making curvature (wherever required) andfitting the same with necessary stainless steel nuts and boltscomplete i/c fixing the railing with necessary accessories and stainlesssteel dash fasteners , stainless steel bolts etc., of required size, onthe top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge. ( forpayment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fastenersetc.) |
| 14 | Granite of any colour and shade Area of slab upto 0.50 sqm |
| 15 | Providing and fixing stone jali 40mm thick in cement mortar1:3(1cement : 3 coarse sand) including pointing in white cementmortar 1:2 (1white cement : 2 Marble dust) with an admixture ofpigment, matching the stone shade, jali slab without any chamfersetc. Red sand stone: |
| 16 | Stone work (machine cut edges) for wall lining etc. (veneer work)backing filled with a grout of 12mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar1:2 (1 white cement : 2 Marble dust) with an admixture of pigmentmatching the stone shade : (To be secured to the backing bymeans of cramps which shall be paid separately) : 60 mm thick |
| 17 | Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm ormore (8mm to 10mm thick) of 1st quality conforming to IS : 15622 ofapproved make in all colours, laid on 12 mm thick Cement Mortar1:3 (1 Cement : 3 Coarse sand) including grauting the joints with whitecement and matching pigments etc., complete. Please Enable Macros to View BoQ information |
