|
| 1 | PROVIDING AND FIXING ARM WHEEL DOUBLE BIG TURNING |
| 2 | PROVIDING AND FIXING ARM WHEEL SINGLE BIG TURNING |
| 3 | PROVIDING AND FIXING CROSS WALKER DUAL SKYER G.I. PIPE MATE |
| 4 | SEE-SAW:- Providing and fixing sea saw equipment for children embaded in cement concrete .minimum length should be 3.0 Meter. Main structure pipe should be of minimum 4mm thick , seat should be made by FRP fitted on 4 mm plate. Post and all structure should be strong enough to prevent any harmfull enjury. |
| 5 | Marry go round Providing and fixing marry go round equipment for children embaded in cement concrete jhual should be strong enough to prevent any enjury all work done as per engineer in charge |
| 6 | SLIDE :- Providing and fixing slide equipment for children embaded in cement concrete . Post and all structure should be strong enough to prevent any harmfull enjury. FRP based equipments |
| 7 | Repairing of playing and gym equipment |
| 8 | Provision for water fountain of required size and shape i/c all necessary fitings,nozzel, water pump flood light etc complete |
| 9 | Dismantling stone slab flooring laid in cement mortar includingstacking of serviceable material and disposal of unserviceablematerial within 50 meters lead. |
| 10 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 meters lead as per direction of Engineer-in- In cement mortar |
| 11 | Demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of Engineer-in-charge. 1:3:6 or richer mix |
| 12 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means /manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be leveled and neatly dressed. neatly dressed. All kinds of soil |
| 13 | Supplying and filling in plinth under floors including,watering, ramming consolidating and dressing complete. |
| 14 | Cement concrete grade M-10 (Nominal Mix) with 20 mm maximumsize of stone aggregate |
| 15 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. completeMild steel and Medium Tensile steel bars. Thermo-Mechanically Treated bars. |
| 16 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level : Cement concrete grade M-20 (Nominal Mix) with 20 mm maximumsize of stone aggregate. Plinth beam bottom slab |
| 17 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc columns walls |
| 18 | Centering and shuttering including strutting, propping etc.and removalof form for : Foundations, footings, bases of columns, etc. For mass concrete. |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 20 | Walls (any thickness) including attached pilasters, butteresses, plinthand string courses etc |
| 21 | Providing and laying 60mm thick factory made cement concreteinterlocking paver block of M-30 grade reflective type rubber moduldedglossy colour paving block made by block making machine with strongvibratory compaction and of approved size and shape laid in requiredcolour and pattern over and including 50mm thick compacted bed of stonedust/sand |
| 22 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 50 (average compressive strength) insuperstructure above plinth level up to floor 2 level including the cost ofscaffolding |
| 23 | 15 mm cement plaster on rough side of single or half brick wall finishedwith a floating coat of neat cement of mix 1:4 (1 cement: 4 sand) |
| 24 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade |
| 25 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 26 | Steel work in built up M.S. tubular section (round, square orrectangular Hollow tube etc.) trusses/frame work etc./ railing work etc.including cutting, hoisting fixing in position and applying a priming coatof approved steel primer, welded and bolted including special shapedwashers etc. complete Hot finished welded type tubes. |
| 27 | Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required |
| 28 | Supplying and installing Double wall corrugated pipes (DWC) ofHDPE ( IS 14930 Part II -marked ) for cable laid under ground withnecessary connecting sockets/ couplings,tees of same materialand at required depth upto 90cm. below road/groundsurface,including excavation, back filling with excavated materialwith ramming and making the surface good. |
| 29 | Supply of XLPE Insulated power cable (conforming IS-7098) 1100 Volt grade/Heavy duty power cable conforming to IS1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKEDwith Alu. Stranded /solid conductor UNARMOURED 4 CORE 10 Sq.mm.(XLPE) |
| 30 | upplying of flood light with high power LED of 1 to3 W each assembled onsingle MCPCB, system lumens output with efficacy>110 lm/W. luminiarehaving color temp 6500K & 50000 burning hrs life with minimum @ L 70,The colour rendering index of LED light should be more than 70. Luminiarecomprises of driver, PF 0.95 & surge protection 4 KV. Housing made ofpressure die castaluminium with heat resistant flat glass, IP66protection.Submission LM 80-08 Form LED Source Manufacturer & LM79-08/ IS16106 from NABL approved lab. Manufacturer manadatory i/cconnection lead, testing etc to complete the job. 2 Yrs Guarantee certificatefrom manufacture |
| 31 | Supplyingof ISIMarkedandacceptedstandardofMiniatureCircuit Breaker(MCB)of 'C'seriessuitablefor 240/415Volts,50Cycle,10 kAValue ACsupplyconfirming to IS: 8828 : 1996, IEC: 60898 :2002 but without enclosures : |
| 32 | Supply of steel tubular pole swaged type as per IS:2713-1980 Complete with baseplateand top Canopy |
| 33 | Supplying, stacking and spreading of good earth forplantation at site including royalty and carriage earthmeasured in stacks will be reduced by 20% for payment. |
| 34 | Planting permanent hedges including digging oftrenches, 60 cm wide and 45 cm deep, refilling theexcavated earth mixed with compost/manure,(compost/manure will be paid separately) and supplyingand planting hedge plants (duranta, Clerodendrum,pedilanthus etc. at 30 cm apart including watering andmaintenance for 3 months). |
| 35 | Grassing with ‘Doob’ grass including watering andmaintenance of the lawn for 30 days or more till the grassforms a thick lawn free from weeds and fit for mowing. (ifneeded the good earth shall be paid separately Please Enable Macros to View BoQ information |
