| 1 | School Bench for 1st to 4th SECTION A — PINE WOOD COMPONENTS (1\\" Thick, Natural Oil Finish) Writing Top — Pine Wood (1\\" thick)L36\\"×W12\\"×T1\\" | 915×305×25 mm, Seat Board — Pine Wood (1\\" thick) L36\\"×W10\\"×T1\\" | 915×254×25 mm , Backrest Board — Pine Wood (1\\" thick) L36\\"×W6\\"×T1\\" | 915×152×25 mm, Bookshelf Board — Pine Wood (1\\" thick) L36\\"×W10\\"×T1\\" | 915×254×25 mm, Natural Oil Finish (Linseed/Tung Oil) Applied on all wood surfaces, 2 coats, Sandpaper & surface prep materials 80/120/180 grit, all wood panels, SECTION B — M.S. STEEL FRAME COMPONENTS M.S. Square Hollow Section Pipe 18G -1\\"×1\\" (25×25mm), 18G — Legs, desk frame, back uprights, M.S. L-Angle 18 Gauge - 1\\"×1\\" (25×25mm), 18G — Shelf support, cross bracing, Welding Charges (MIG/Arc) - Full frame fabrication, all joints, grinding, Anti-Rust Primer (Red Oxide) - On all M.S. surfaces before oil paint, 1 coat Oil Paint — Enamel / Synthetic - On all M.S. frame, 2 finish coats, approved colour, Electrodes / welding consumables- As required for complete weldingSECTION C — HARDWARE, FITTINGS & ACCESSORIESM.S. Bolts, Nuts & Washers - M8×50mm ZP — for fixing wood to frame,Rubber Floor Caps / Foot Pads- On all 4 legs, anti-scratch, 1\\" sq.Wood Screws (SS / ZP) - For fixing wood panels to frame, 2\\" & 3\\"SECTION D — TransportationTransportation & Delivery - To project site, packing and unloading included Please Enable Macros to View BoQ information |
