|
| 1 | Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion in natural ground and making good disturbed ground |
| 2 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out and removing surplus soil to a distance n exc 50 m and making good surface filling with PCC complete all as specified and directed. (Note : PCC will be measured and paid seperately). |
| 3 | M & L cement concrete type C2 1:3:6 (40 mm graded stone Aggregate) as in embedding of post. |
| 4 | S&F angle iron as in posts and struts in fencing/ in Y-Shape angle iron incl cutting top to shape as directed, drilling holes, notching for wire etc and flat iron fillets Fe 410 -W (GdeE- 250) qualityA for securing chain link fencing all as specified and directed. |
| 5 | S & F MS flat iron for fixing chain link fencing with necessary nut and bolt complete all as specified |
| 6 | S/F mild steel round bar / TMT bars 10 mm dia cut to length bend to shape required including cranking binding hooking as required for chain link fencing , for tie bar strenghting and fixing with nut bolt in fencing post all as specified. |
| 7 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts, etc. including provn of galvanised mild steel binding wire of 0.9mm dia annealed complete all as specified and directed. |
| 8 | Dismantling fencing wire mesh any type |
| 9 | Supply only chain link MS galvanised fencing any size or type complete all as specified and directed. |
| 10 | M&L applying two coats of synthetic enamel paint on steel and iron surfaces incl necessary preparation of surfaces and one coat of red oxide primer |
| 11 | Demolition of brick work built in cement mortar in any description and position complete all as specified and directed. |
| 12 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 |
| 13 | Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. |
| 14 | M&L for Rendering 15mm thick on stone masonary surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint over one coat of primer complete all as specified and directed. |
| 16 | M & L for PCC 1:2:4, type B0 (using 12.5 mm graded stone aggrgate) as in coping. |
| 17 | M&L for preparation of surfaces of old plaster surface of wall and applying two coat of cement base paint over one coat of primer complete all as specified and directed. |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for |
| 19 | M&L for Framed work as in doors or gates of angle or other section 410-W(Gde E- 250) qualityAwith gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 20 | Supply and fix in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any tupe of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, all as specified and as directed.Note : Each line of wire will be measured. Please Enable Macros to View BoQ information |
