|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineerin-charge. |
| 2 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 3 | Providing and laying plain cement concrete of grade M10 (1:3:6) using 40 mm aggregate below foundations and floors including cost of centering, mixing, laying, curing, as directed by site in-charge etc. complete. |
| 4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with |
| 5 | Providing and laying cement concrete over the R.R Stone massonary of 1:2:4 using 20 mm aggregate below foundations and floors including cost of centering, mixing, laying, curing, as directed by site in-charge etc. complete. |
| 6 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand etc complete in all respect. |
| 7 | Providing & Laying of Sand Stone 10 Cm Thick fine dressed sand stone flooring over 20 mm average thick base of cement mortor 1:5 ( 1 Cement : 5 C.Sand ) Joing finished flush Pointing as per matching with original Taxture of Monument etc complete in all respect |
| 8 | Ruled / flush pointing on sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 ( 1 lime:1.5 surkhi:1:2 Dust) as per Matching with structure mixed with adhesive material etc complete in all respect |
| 9 | Providing & fixing of G.I. Pipe railing in Both side Pathway for tourist facility vertical 2\\" & horizontal pipe 1.6\\" in dia including the elbow, socket & band & welding Charges & fixing them in cement concrete 1:3:6 (1cement : 3 C.sand : 6 stone aggregate )in Block 0.45x0.45x0.45 mm & & Painting the two or more coat of enemal paint approved shade over the red oxide & Including transportation charge loading/ unloading at working site etc complete |
| 10 | Providing and fixing the cattle guard by rolled steel I beam ( ISMB-100) with support by rolled steel channel (MC-100) including 25 mm rounding bar 9 cm centre to centre distance including painting of approced brand enamel paints over red oxide primer coat etc complete in all respect. [ UNIT- M2] |
| 11 | Excavation for Foundation in all kinds of soil excluding rock including shoring, dewatering if required,proper storage of excavated earth & disposal within a lead of 1000 meters,etc.(i)0.0-1.50 m depth Including all labour charges, transportation charges, conveyance charges, t & p whatever required for the works etc. all complete as directed by site in-charge. |
| 12 | Compacted Earth Filling: providing, transporting and laying well compacted and consolidated with filling every 300 mm in layers and free from debris and (by property consolidating-ramming and watering to 95% proctor dencity test) as per drawing,specification and as directed by site incharge |
| 13 | Providing and laying plain cement concrete of grade M10 (1:3:6) using 40 mm aggregate below foundations and floors including cost of centering, mixing, laying, curing, as directed by site in-charge etc. complete. |
| 14 | Providing and laying reinforced cement concrete of grade M20 (1:1.5:3) in footings, columns, plinth beams, roof slabs, lintels, ramps, landings, etc., including compaction, finishing, curing, excluding reinforcement and shuttering |
| 15 | Centering and shuttering including strutting, propping etc. and removal of formwork for all RCC structural elements (footings, columns, beams, slabs, lintels). |
| 16 | Brick work with FPS bricks in cement mortar 1:6 in foundation and superstructure, in walls 230 mm thick, including scaffolding, curing, raking of joints, etc. complete. |
| 17 | Brick work with FPS bricks in cement mortar 1:4 in partition walls 115 mm thick including reinforcement in every third course, scaffolding, curing, etc |
| 18 | Supplying, cutting, bending, binding, and placing in position HYSD steel reinforcement bars (Fe500) in RCC work, including binding wire and chairs. |
| 19 | 20 mm thick cement plaster in single coat on external walls in CM 1:6 including preparation of surface, scaffolding, curing, etc. |
| 20 | 12 mm thick cement plaster in single coat on internal walls in CM 1:6 including preparation of surface, scaffolding, curing, etc. |
| 21 | 6 mm thick ceiling plaster in cement mortar 1:3 including surface preparation, scaffolding, curing, and smooth finish. |
| 22 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 800 x 800 mm |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy,bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 2023 Code 8.31 Page No 454. |
| 24 | Providing and applying roof treatment with water-proofing compound over cleaned RCC roof surface including cleaning, priming, two coats of bitumen or chemical-based waterproofing and top finishing layer, complete as per specifications. |
| 25 | Providing and applying two or more coats of exterior waterproof cement paint of approved shade over a coat of primer on external plastered surface including preparation of surface, scaffolding etc. complete. |
| 26 | Providing and applying two or more coats of interior plastic emulsion paint of approved brand and shade over one coat of wall primer on internal wall surfaces including preparation of surface, putty work, and scaffolding. |
| 27 | Providing and fixing 100 mm dia PVC rainwater pipes with standard fittings, clamps, and painting with anti-corrosive paint, including cutting and making good the walls. |
| 28 | Providing and laying damp proof course with 40 mm thick cement concrete 1:2:4 mixed with water-proofing compound over plinth level, excluding cost of cement, including curing. |
| 29 | Providing and laying 60 mm thick IPS (Indian Patent Stone) flooring using 1:2:4 mix, machine-finished, including surface hardener, curing, and excluding cost of cement. |
| 30 | Providing and fixing 150 mm high skirting in IPS finish to match floor including surface finishing and rounding edges, excluding cost of cement. |
| 31 | Providing , Supplying & Erection of WCs (European type) including all necessary equipment/ accessary required to operate the WC. |
| 32 | Providing, supplying, and installing European-type WCs of vitreous china, including seat cover, flushing cistern, P/S trap, and complete fixing with necessary hardware as per site situation and instruction of Site incharge. |
| 33 | Providing and fixing wash basin (550 mm size), white vitreous china, single tap hole, with C.P. brass pillar cock, bottle trap, waste pipe and union, complete with fixing brackets and cutting and making good the walls. |
| 34 | Providing, Supply & erection of Wash Basin for PH washroom, including all necessary equipment and accessories |
| 35 | Providing and fixing white vitreous china flat back or wall corner urinals, with standard CP flush pipe, rubber spreader, CP brass waste coupling and brackets, including cutting and making good the walls/floor as per instructed by EIC |
| 36 | Providing and fixing electric hand dryer, automatic sensor type, ABS body, wall mounted, with complete wiring, bracket fixing, and connection, as approved by Engineer-in-charge. |
| 37 | Supply & erection of Mirrors used in wash room, Quality , Brand & Size shall by approved by EIC. |
| 38 | Providing and fixing SS handrails (L-shaped and horizontal) of size 38 mm dia, 18-gauge, inside PH toilet including cutting, welding, fixing with anchor fasteners, complete as per universal design guidelines. |
| 39 | Door 1 Providing and fixing of doors (0.9x2.1 metre) , 35 mm thick, solid core, ISI marked, including SS fitings, such as hinges, handles, tower bolt, aldrop, stopper, along with all the accessories as per the instruction of site in charge |
| 40 | Providing and fixing Double Leaf PH entry door of size 1.2 m X2.1m , 35 mm thick, solid core, ISI marked, including SS fitings, such as hinges, handles, tower bolt, aldrop, stopper, and provision for easy wheelchair access, with all accessories and fixtures complete in all respects or as per instructions of site in charge. |
| 41 | Providing and fixing of doors 1.2 m X2.1m , 35 mm thick, solid core, ISI marked, including SS fitings, such as hinges, handles, tower bolt, aldrop, stopper, along with all the accessories as per the instruction of site in charge |
| 42 | supply and fixing of Exhaust Fan (300 mm dia), heavy duty, metal body, single phase 900-1400rpm, along with fittings and accessories |
| 43 | Providing and fixing Retro reflecting direction board at acces point of highway/ roads ( size 1.20 x 0.90 mtr.) outer frame 65mm dia stainless steel pipe grade 304 with and inner frame 40 mm dia SS Pipe with 2 mm thick Aluminium sheet fixed in frame with blue back ground and text in white colour both side complete with labour and material as per design and drawing attached |
| 44 | Provision for making, supplying and fixing of stone benches of size 6'3\\" long X 2'0\\" Wide X 1'3\\" high using sand stones from dhangadhra quarry including all materials, labours for cutting, dressing, moulding, carving, fixing and transportation up to monument etc. All complete as per the approved design supplied by architect. |
| 45 | Provision for making, supplying and fixing of stone dustbins of size 2'0\\" X 2'0\\" X 3'4\\" High using sand stones from dhangadhra quarry and 18 Gauge stainless steel bin of grade 316 for waste collection including all materials, labours for cutting, dressing, moulding, carving, fixing and transportation up to monument etc, all complete as per the approved design supplied by architect. |
| 46 | Providing and fixing the Drinking Water Cabin with Customised FRP cabin of Size 10 X 10 X 10with exhaust window covered with iron grills, necessary electricity wiring and installation of switch board for electricity. Making the Platform in Cement Concrete etc complete. Please Enable Macros to View BoQ information |
