|
| 1 | Making 30cm (12\\") dia bore upto 4 M depth below ground with hand auger of approved quality in ordinary soil (vide classification of soil item-A) true to pump and without eccentricity in any stage of operation and disposal of the excavated earth upto 50 M lead including all lifts, all complete as per approved design and direction of E/I. (B.C.D. S.O.R. Item No. 5.1.4) |
| 2 | Earth work in excavation in canal having discharge between 8.5 cumec (300 cusec) and 0.14 cumec (5 cusec) in ordinary soil ( vide clasification of soil item A ) including clod breaking having earth in 225 mm layer and rough dressing of soil with initial lead of 10 m and lift 1.5 m all complete as per approved design specification and direction of E/I. (W.R.D 7.1.8) |
| 3 | E/W in dam fill in semipervious and impervious zone excavation by hydraulic excavator and carrige by tipper truck making dam in proper design section including earth to be laid in layers of not more than 225 mm thick and breaking of clods to maximum 63 mm cube with all lifts including construction and maintenance of haul road etc. all complete as per specification and direction of E/I. Lead beyond 2 km. but upto 3 km. (W.R.D 5.1.22.4) |
| 4 | Type - A, \\"W\\" : Metal Beam Crash Barrier (Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811) (R.C.D 8.23 A) |
| 5 | Supplying and laying gravel filter (5mm to 15mm size) in the filter blanket and toe drain (in Horizontal portion) of the dam as per design, drawing including the cost of materials royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. ( item no.5.6.2 COMMON PART A) |
| 6 | Supplying and laying good quality of stone metal filter (20mm to 63mm size) in the rock toe, heel trenches ,toe drain as per design and drawing including the cost of materials royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. ( item no.5.6.3 COMMON PART A) |
| 7 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I. (B.C.D. S.O.R. Item No. 5.1.1) |
| 8 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) (B.C.D. S.O.R. Item No. 5.1.2) |
| 9 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.7 |
| 10 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l.(B.C.D. S.O.R. Item No. 5.1.10) |
| 11 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I.(B.C.D. S.O.R. Item No. 5.6.3) |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)(B.C.D. S.O.R. Item No. 5.3.1.2) |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.1 |
| 14 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (D.S.R 16.91.2) |
| 15 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm (B.C.D. S.O.R. Item No. 5.3.2.1) |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)(B.C.D. S.O.R. Item No. 5.3.10) |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)(B.C.D. S.O.R. Item No. 5.3.9.1) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.B.C.D. S.O.R. Item No. 5.3.17.1 |
| 19 | Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.(B.C.D. S.O.R. Item No. 5.2.6) |
| 20 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).B.C.D. S.O.R. Item No. 5.3.5 |
| 21 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.(B.C.D. S.O.R. Item No. 5.2.14) |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(B.C.D. S.O.R. Item No. 5.3.11) |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.(B.C.D. S.O.R. Item No. 5.3.17.5) |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.(B.C.D. S.O.R. Item No. 5.3.17.6) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and platform.(B.C.D. S.O.R. Item No. 5.3.17.3) |
| 26 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I.(B.C.D. S.O.R. Item No. 5.5.12) |
| 27 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks applying a priming red lead paint, taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.29 |
| 28 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.(B.C.D. S.O.R. Item No. 5.7.6) |
| 29 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, all complete as per specification and direcition of E/l.(B.C.D. S.O.R. Item No. 5.7.3) |
| 30 | Providing water proofing treatment including preparation of surface as required for treatment of SLOPING ROOF consisting of following operations.1) Cement slurry with sika latex power (1 LTR. Per bag) and cement mortar (1:4) mixed with plastocrete super (100 ml per bag of cement) to get smooth surface. 2) Two coats of Polymer coating with Sika Raintite (minimumu consumption = 1Ltr. In 18 S.FT.) by brush on all surface and sand screeding on top.3) Layer of cement slurry with Sika Latex Power (@ 1Ltr. Per bag of Cement.) over polymer surface.4) top surface to be finished with tile design (as per approved) with cement mortar (1:4) and plastocrete super (100ml per bag of cement))cement)Laying average 2\\" th. P.C.C. (1:2:4) and 3\\" th. Slope with Sika Plastocrete Super (100 ml per bag of cement)5) Curing minimum 21 days with hessian cloth/ jute bag.AREA OF SLOPING ROOF Non Schedulen Item |
| 31 | Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL (B.C.D. S.O.R. Item No. 5.5.4 ) |
| 32 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (B.C.D. S.O.R. Item No. 5.5.5 (a) ) |
| 33 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) (c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) (B.C.D. S.O.R. Item No. 5.5.5 (b,c) ) |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.D.S.R. Item No. 13.80 |
| 35 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors and taxes all complete as per specification and direction of E/I.(B.C.D. S.O.R. Item No. 5.8.18) |
| 36 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. (B.C.D. S.O.R. Item No. 5.8.24) |
| 37 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.(B.C.D. S.O.R. Item No. 5.8.43) |
| 38 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.30 |
| 39 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm (D.S.R 16.70) |
| 40 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) B.C.D. S.O.R. Item No. 5.5.8.41 |
| 41 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) B.C.D. S.O.R. Item No. 5.5.8.45 |
| 42 | Cost of drilling 200mm x 165mm x 100m deep bore well in all kinds of soil and rock in rural area for installation of pump set with D.T.H. rig all complete! including supplying all materials, labours, tools, drilling rig, air compressor and equipment as well as fuel, lubricants for making boring and cost of transporting/charges of rig machine & other vehicles up to site of the work as per specification and direction of E/l. (a) Up to 50 mtr Below G.L.(M1035 : DW&S) |
| 43 | (b) Beyond 50 mtr. up to 150 mtr. Below G.L. (M1035 : DW&S) |
| 44 | Supplying all materials, labours, equipments for lowering 200mm dia M.S. ERS pipes as casing of well thickness 6mm for protecting the sites from falling during the process of drilling ail complete including carriage to work site. (M1036 : DW&S) |
| 45 | Supplying labour and equipments including 200mm dia. M.S. Cap and fitting and fixing over the tube well properly and taking it out as per direction of E/I. (M1036 : DW&S) |
| 46 | Supplying all tools, labours, equipments for lowering 32mm dia P.V.C. pipe in 3 mtr. length in the drilling bore of tube well etc. all complete job as per direction of E/I. D.S.R. 18.9.4 |
| 47 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, all as per requirement and direction of Engineer-in-charge. (M1042 : DW&S) |
| 48 | Supplying fitting and fixing of KSB/KIRLOSKER/CRI make 1.50 HP Submersible pump set having head of 135 metre including all taxes, royalty, etc.all complete job as per direction of E/I. (M1055 : DW&S) |
| 49 | Supplying fitting and fixing of 5 H.P. standard make starter panel board with arrangement of all necessary protection including all taxes,royalty etc all comlete job as per direction of E/I. (M1065 : DW&S) |
| 50 | Supplying fitting and fixing 3 core 4mm2 flat copper submersible cable FINOLEX/HAVELS make including all taxes,royalty etc all complete job as per direction of E/I. (M1906 : Energy) |
| 51 | Supplying labour for fitting and fixing deep well cylinder jointing materials, chrome leather bucket all tools and plan etc. required for the job for low water level all complete job as per specification and direction of E/I. (M1052 : DW&S) |
| 52 | Providing all labour for fitting and fixing of India Mark-II hand pump including supplying all tools and plats etc. as required for the job all complete job as per direction of E/I. (M1053 : DW&S) |
| 53 | Supplying all materials, labour & equipments for constructing P.C.C. (1:2:4) drain as per UNICEF design etc. all complete.(M1046 : DW&S) |
| 54 | Cost of 32mm dia G.I. pipe 3 M long screwed at both ends with seamless Socket as per IS. 1239 (Part-II)/1990. (M1025 : DW&S) |
| 55 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (D.S.R. 2023- ITEM CODE 18.48) |
| 56 | Precast Reinforced Bench |
| 57 | Carriage of Material Cement |
| 58 | Chips |
| 59 | Brick |
| 60 | Good and Services Taxes @ 18% |
| 61 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
