Banking and Finance Cooperative Closing in 0 days TDR #55106001

Tender for K R PETE TALUK BRANCH INTERIOR WORK

Issued by Cooperative · Mandya, Karnataka
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Apr 2026
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mandya → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

K R Pete Taluk Branch Interior Work - Providing And Fixing 1 Mm Thick M.S. Sheet Sliding-Shutters, With Frame And Diagonal Braces Of 40X40x6 Mm Angle Iron, 3 Mm M.S. Gusset Plates At The Junctions And Corners, 25 Mm Dia Pulley, 40X40x6 Mm Angle And T- Iron Guide At The Top And Bottom Respectively, Including Applying A Priming Coat Of Approved Steel Primer Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge.,Customer Stain Less Steel Bench 3 Seater As Per Specifications And As Per Directions Of The Engineer-In-Charge.,Providing , Fitting , Fixing Writing Plat Form At A Height Of 4Ftabove Floor Level Fixed To The Wall Made Out Of 19 Mm Bwp Block Board With Lamination 1 Mm Tk On Top & Hard Wood Beading Ducco Painted . At Least 10 Nos Vertical Slip In Chalan Shelfs Attached To Wall Over Writing Platform Made Out Of Min 4 Mm Tk Acrylic Sheets With 6 Mm Tk Ply Back Up. Each Chalan Shelf Will Be Of Size 6Inch Height , 6Inch Wide .The Entire Unit Will Be Complete In All Respect Including Materials ,Labor Etc,Providing And Fixing Double Glazed Hermetically Sealed Glazing In Aluminium Windows, Ventilators And Partition Etc. With 6 Mm Thick Clear Float Glass Both Side, Having 12 Mm Air Gap, Including Providing Epdm Gasket, Perforated Aluminium Spacers, Desiccants, Sealant (Both Primary And Secondary Sealant) Etc. As Per Specifications, Drawings And Direction Of Engineer-In-Charge Complete Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And With Bank Logo,Providing Modular Working Counter Size 5 Ftx3ftx2ft-6Inch, And Provide 12 Mm Thick Glass In Front Face Of The Table And Both Side 40 Mm Thick Ply Partition , Provide Single Side Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All,Providing Modular Cashier Table Size 5 Ftx3ftx2ft-6Inch, , And 1Ft .6Inch H Ply Partition Provided In Front Face Of The Table Both Side Provide Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All Labour And Material.,Providing Modular Executive Type Manager Table Size 5 Ftx3ftx2ft-6Inch, Both Side Provide Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All Labour And Material.

AI Tender Summary

OUR REF NO 55106001
AUTHORITY Cooperative
TENDER VALUE Ref. Documents
LAST DATE 27-04-2026
Authority
Authority Name Mandya District Co- Operative Central Bank Limited
Work Description K R Pete Taluk Branch Interior Work - Providing And Fixing 1 Mm Thick M.S. Sheet Sliding-Shutters, With Frame And Diagonal Braces Of 40X40x6 Mm Angle Iron, 3 Mm M.S. Gusset Plates At The Junctions And Corners, 25 Mm Dia Pulley, 40X40x6 Mm Angle And T- Iron Guide At The Top And Bottom Respectively, Including Applying A Priming Coat Of Approved Steel Primer Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge.,Customer Stain Less Steel Bench 3 Seater As Per Specifications And As Per Directions Of The Engineer-In-Charge.,Providing , Fitting , Fixing Writing Plat Form At A Height Of 4Ftabove Floor Level Fixed To The Wall Made Out Of 19 Mm Bwp Block Board With Lamination 1 Mm Tk On Top & Hard Wood Beading Ducco Painted . At Least 10 Nos Vertical Slip In Chalan Shelfs Attached To Wall Over Writing Platform Made Out Of Min 4 Mm Tk Acrylic Sheets With 6 Mm Tk Ply Back Up. Each Chalan Shelf Will Be Of Size 6Inch Height , 6Inch Wide .The Entire Unit Will Be Complete In All Respect Including Materials ,Labor Etc,Providing And Fixing Double Glazed Hermetically Sealed Glazing In Aluminium Windows, Ventilators And Partition Etc. With 6 Mm Thick Clear Float Glass Both Side, Having 12 Mm Air Gap, Including Providing Epdm Gasket, Perforated Aluminium Spacers, Desiccants, Sealant (Both Primary And Secondary Sealant) Etc. As Per Specifications, Drawings And Direction Of Engineer-In-Charge Complete Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And With Bank Logo,Providing Modular Working Counter Size 5 Ftx3ftx2ft-6Inch, And Provide 12 Mm Thick Glass In Front Face Of The Table And Both Side 40 Mm Thick Ply Partition , Provide Single Side Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All,Providing Modular Cashier Table Size 5 Ftx3ftx2ft-6Inch, , And 1Ft .6Inch H Ply Partition Provided In Front Face Of The Table Both Side Provide Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All Labour And Material.,Providing Modular Executive Type Manager Table Size 5 Ftx3ftx2ft-6Inch, Both Side Provide Drawer Unit As Per Drawing Details Slides On Telescopic Slider Made Up Of 20Mm Th.Ply With Locking Arrangement. The Table Surfaces Are To Be Finished With 1.0Mm Th.Laminates As Per Design Of Approved Shade And Top Of The Table Covered By 20 Mm Granite With Approved Design And The Work Should Be Completed Including All Labour And Material.
Basic Detail
Tender No MDCCB/2026-27/IND0011
Bidding Type Tender
Location
City Mandya
State Karnataka
Key Dates
Publish Date 16 Apr 2026
Submission Date 27 Apr 2026
Open Date 29 Apr 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 25000
Exemption Not Available
Document List
26c46cfb-f8da-4490-8cc5-1d7a1784676d.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

26c46cfb-f8da-4490-8cc5-1d7a1784676d.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender