|
| 1 | M&L for one coat of synthetic enamel paint to all exposed external and internal surfaces of locker steel (Furniture Spl Drg No. CWE/ P/ BAN/ 03 and FD- 1029), duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening by applying putty, removing dents, bends & welding wherever required and also oiling and greasing to locker steel for smooth functioning of locking devices and drawers, complete all as specified and directed. |
| 2 | M&L for one coat of synthetic enamel white paint to all exposed external and internal surfaces of Table bed side steel, duly Spray/ brush painting, including necessary preparation of surfaces, complete all as specified and directed. |
| 3 | M&L for one coat of synthetic enamel black paint to steel frames of Tale Dining ORs duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening, complete all as specified and directed. |
| 4 | M&L for one coat of synthetic enamel paint to Trestle Steel including necessary preparation of surfaces, complete all as specified and directed. |
| 5 | M&L for one coat of synthetic enamel paint to all exposed external and internal surfaces of Almirah steel large with shelf, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening by applying putty, removing dents, bends & welding wherever required and also oiling and greasing for smooth functioning of locking devices, complete all as specified and directed. |
| 6 | All as described in item No. 05 but Almirah steel large with ½ hanging & ½ shelf. |
| 7 | All as described in item No 05 but FMN set for Charpoy. |
| 8 | M&L for one coat of synthetic enamel paint to all exposed external and internal surfaces of Almirah steel medium/small with shelf, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening by applying putty, removing dents, bends & welding wherever required and also oiling and greasing for smooth functioning of locking devices, complete all as specified and directed. |
| 9 | All as described in item No. 08 but Almirah steel medium/small with ½ hanging & ½ shelf. |
| 10 | M&L for one coat of synthetic enamel paint green colour to all exposed external and internal surfaces of Table office clerk steel duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening, complete all as specified and directed. |
| 11 | M&L for one coat of synthetic enamel paint olive green colour to all exposed external surfaces of Chair steel tubular with Arms/ without Arms duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents, complete all as specified and directed. |
| 12 | M&L for one coat of synthetic enamel paint olive green colour to all exposed external surfaces of Chair CBA SPL with folded hand rest duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents, complete all as specified and directed. |
| 13 | M&L for one coat of synthetic enamel paint white colour to all exposed external surfaces of Teapoy Verandah duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents, cmplete all as specified and directed. |
| 14 | M&L for one coat of synthetic enamel paint olive green colour to all exposed external and internal surfaces of rack steel shelving adjustable (Trade Pattern) of size 1905 x 914mm x 689mm duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents, complete all as specified and directed. |
| 15 | M&L for one coat of synthetic enamel paint olive green colour to all exposed external and internal surfaces of Book shelf open large steel duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents, complete all as specified and directed {Furniture Drawing No. FD-69 (M)}. |
| 16 | All as described in item No. 15 but Book shelf open small steel {Furniture Drawing No. FD-69 (M)}. |
| 17 | M&L for one coat of synthetic enamel white paint to all exposed external and internal surfaces of Stool steel 305mm X 305mm X 710mm, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening, complete all as specified and directed. |
| 18 | M&L for one coat of synthetic enamel white paint to all exposed external and internal surfaces of Stool steel 305 X 305 X 510 mm, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening, complete all as specified and directed. |
| 19 | M&L for one coat of synthetic enamel olive green colour paint to all exposed surfaces of Bed steel F(G)-4, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening, complete all as specified and directed. |
| 20 | Dismantling of existing GI Charpoy for replacing of unserviceable parts such as long rails, short rails, legs, GI elbow 3 way, GI check nuts and re-assembling the same by replacing with new/ re-conditioned long rails/ short rails/ legs/ GI elbow 3 way and check nuts all as specified and as directed. Note: New/ re-conditioned items will be measured and paid separately under relevant items of this Schedule. |
| 21 | M&L for 32mm bore x 1980mm long GI tube medium grade duly threaded as in New long rail for charpoy all as specified and as shown on drawing No. FD - 220. |
| 22 | Fabricating only short rails of GI charpoy by alternation of long rails including necessary cutting and threading, complete all as specified and as shown on Drg No. FD- 220. Note: Serviceable portions of long rails obtained from dismantling shall be re-used under this item. |
| 23 | Fabricating only leg of GI charpoy by alternation of short rails including necessary cutting and threading and provision 50mm dia MS base plate with 3mm thick MS plate, duly continuous welded to legs, complete all as specified and as shown on Drg No. FD- 220. Note: Serviceable portions of short rails obtained from dismantling shall be re-used under this item. |
| 24 | Supply only GI elbow, 3 way, 32mm bore suitable for charpoy GI, complete all as specified and as shown on Drg No. FD- 220. |
| 25 | Supply only GI check nut, 32 mm dia 6 mm thick suitable for charpoy GI all as specified and as shown on Drg No. FD- 220 |
| 26 | S&F hard rubber shoes, black colour, 25 mm size suitable for table dinning OR's including removing unserviceable hard rubber shoes, complete all as specified and as directed. |
| 27 | M&L for electric arc welding to the broken joints of rails, legs and stiffeners of Charpoy rectangular pipe including finishing the welded joints smooth, complete all as specified and as directed. |
| 28 | M&L for electric arc welding to the broken joints of rails, legs and stiffeners of Charpoy double decker including finishing the welded joints smooth all as specified and as directed. |
| 29 | M&L for electric arc welding to the broken joints of rails, legs, head frame, foot frame and stiffeners of bed steel including finishing the welded joints smooth all as specified and as directed. |
| 30 | M&L for mild steel works as in angle cleats, supports, bolts and nuts, etc. of suitable size to fix to frame work of charpoy double decker including necessary welding all as specified and as directed. |
| 31 | M&L for one coat of synthetic enamel paint (olive green colour) to charpoy double decker including necessary preparation of surfaces all as specified and as directed . |
| 32 | M&L for one coat of synthetic enamel paint (olive green colour) to Charpoy IP Hard Top rectangular pipe including necessary preparation of surfaces all as specified and as directed . FD/E6/MAP-II/01 |
| 33 | M&L for 18mm thick particle board interior grade with commercial face veneers on both sides duly covered with 22 gauge aluminium sheet and folded at four edges as in table top of Dining table ORs of size 1900 x 685 x 760mm fixed to steel frames with suitable size screws including provision of one coat of black colour synthetic enamel paint to steel frames including taking down unserviceable table top all as specified and as shown on drawing No.FD-165 |
| 34 | M&L for mild steel channel leg base of Almirah steel large with ½ hanging & ½ shelf made out of 1mm thick MS sheet duly fabricated to shape and size and welded to bottom by electric arc welding as in replacement of damaged legs wherever required including provision of two coats of synthetic enamel paint (olive green colour) over a coat of red oxide primer all as specified and as directed. |
| 35 | M&L for mild steel channel leg base of Almirah steel medium with ½ hanging & ½ shelf made out of 1mm thick MS sheet duly fabricated to shape and size and welded to bottom by electric arc welding as in replacement of damaged legs wherever required including provision of two coats of synthetic enamel paint (olive green colour) over a coat of red oxide primer all as specified and as directed. |
| 36 | M&L for 25mm x 25mm MS square tubes, 16 gauge, fixed to Table Dining ORs by electric arc welding as in replacement of damaged portions of Table Dining wherever required including provision of two coats of synthetic enamel paint (Black colour) over a coat of red oxide primer all as specified and as directed. |
| 37 | S&F Mild steel locking device jaw along with 8mm mild steel rod suitable for almirah steel with shelves (large/ medium/ small), including removing existing unserviceable locking device all as specified and directed. |
| 38 | S&F lock with stainless steel keys in duplicate, Godrej pattern, suitable for Almirah steel (large/ medium/ small), 6 levers, 65 mm size, including removing existing unserviceable lock all as specified and directed. |
| 39 | S&F handle with grip, mild steel chromium plated, 90 mm size, suitable for Almirah steel (large/ medium/ small), including removing existing unserviceable handle all as specified and directed. |
| 40 | S&F hasp and staple, mild steel chromium plated, 75 mm size, suitable for locker steel, duly riveted with suitable size rivets including removing existing unserviceable hasp and staple all as specified and directed. |
| 41 | M&L for bow handle, mild steel chromium plated, 100 mm size, suitable for steel locker drawer including removing the existing unserviceable handle all as specified and directed. |
| 42 | S&F PP base with 5 Nos. wheel arrangements for chair revolving including taking down unserviceable base of any description all as specified and as directed. |
| 43 | S&F center tilt gas lift mechanism for chair revolving including taking down unserviceable mechanism of any description all as specified and as directed. |
| 44 | S&F superior quality cushion foam and tapestry cloth of seat with plywood for chair revolving including taking down unserviceable cushion and upholstry of any description all as specified and as directed.Note: Cost of tapestry cloth shall not be less than Rs. 275 per running metre. |
| 45 | S&F superior quality cushion foam and tapestry cloth for back rest with supporting plywood of chair revolving including taking down unserviceable cushion and upholstry of any description all as specified and as directed.Note: Cost of tapestry cloth shall not be less than Rs. 275 per running metre. |
| 46 | S&F Hard plastic wheel for chair revolving superior quality, complete all as specified and as directed. |
| 47 | S&F in replacement PVC handle any type & shape as per existing complete all as specified in drawing and directed. |
| 48 | S&F superior quality cushion foam and tapestry cloth of seat and backrest with supportig plywood of chair writing including taking down unserviceable cushion and upholstry of any description all as specified and as directed.Note: Cost of tapestry cloth shall not be less than Rs. 275 per running metre. |
| 49 | S&F in replacement Computer table top of 18 mm thick prelaminated particle board, exterior grade, including 4mm thick teak wood beading all round; fixed to frame with suitable screws complete all as shown in drawing and directed. |
| 50 | S&F in replacement Compute table Drawer of size and shape as per drawing along with two telescopic chanel of best quality and shade complete all as specified in drawing and directed. |
| 51 | S&F in replacement Computer table key board tray of size and shape as per drawing along with two telescopic channel of best quality and shape complete all as specified in drawing and directed. |
| 52 | M&L for one coat of synthetic enamel paint to all exposed external and internal surfaces of Rack Shoe Steel, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening by applying putty, removing dents, bends & welding wherever required, all as specified and directed. |
| 53 | Removing the UNSV drawer from table office officer/clerk steel and supply and fix new drawer made out of 1mm thick MS sheet made to shape, welding etc, including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint, first quality, over a coat of red oxide primer all as per drg and as directed by Engr-in-Charge.Note:- Each drawer will be measured as one unit. |
| 54 | Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys all as directed by Engr-in-charge for table office officer/table office clerk steel. |
| 55 | Removing the UNSV drawer from Table 900X600mm steel and supply and fix new drawer made out of 1mm thick MS sheet made to shape, welding etc, including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint, first quality, over a coat of red oxide primer all as per drg and as directed by Engr-in-Charge.Note:- Each drawer will be measured as one unit. |
| 56 | Removing the existing unserviceable leg of table 900x600mm /900X900mm steel and S&F new legs made out of 25mm MS square tube 1.6 mm thick as per size ans shape as per existing complete all as specificed and directed. |
| 57 | Removal of existing unserviceable shelves and S&F new shelves of Almirah large/small/med steel made out 1.00 mm thick MS sheet of existing patterns including fixing with suitable screws complete all as specificed and directed. |
| 58 | M&L for continuous gas welding at damaged portions/joints complete all as specificed and directed.Note: Each joint exceeding 2.5cm to be measured seperately. |
| 59 | M&L for removal of u/s Head/Foot Rest of Bed Hard Steel (FD/E6/MAP/08) any position Head rest/Foot rest, S&F Head/Foot Rest of Bed Hard Steel including fixing in position as shown on drg / same as on ground with suitable size screws & cup washers, complete all as specificed and directed. |
| 60 | M&L for removing the old, faded tapestry cloth from the seat, back, handle and left & right sides of each row of the auditorium chairs, repairing rubber foam work including filling holes with foam rubber and levelling the surface, re fixing the nuts and bolts with and including S&F new tapestry cloth of best quality not less than Rs. 360/- per metre, the cloth shall be cut, stitched and fixed as per the existing shape, pattern & design of the chairs using appropriate methods to ensure proper tension and a neat finish. All upholstery work shall be executed using upholstery-grade stitching thread, supporting ply wood base and adhesives as required, complete all as directed by the Engr-in Charge. The tapestry cloth shall conform to the sample approved by the GE.1) Seat size 20''x19'' 2) Back size 23''x19'' 3) PVC Handle/Arm Please Enable Macros to View BoQ information |
