|
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.13.91 |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.15.3 |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.5.3 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.5.9.3 |
| 5 | Steel reinforcement Mild steel and Medium Tensile steel bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Above plinth level. Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST.DSR 2023.5.22.1 |
| 6 | 12 mm thick plaster with cement & fine sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not be less than 1 cm including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.13.1.1 |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. with approved quality material of Berger/J.K./ Birla or similar. Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.13.80 |
| 8 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's old work (two or more coats) Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2021.13.108.1 |
| 9 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)on existing cement paint surface Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.13.111.1 |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. paint to be used should confirem the ISI No. 103-1950 . DSR 2023.13.99.1 |
| 11 | Providing and laying Size of Tile 600x600 mm vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete.Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.11.41.2 |
| 12 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth .Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST.DSR 2023.6.2.1 |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.8.31 |
| 14 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 40x40x6 mm, joints mitred and welded by angle iron 40x40x6 mm or 40x 6 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST.DSR 2023. 10.31 |
| 15 | Providing and fixing ISI marked 35 mm thick flush door shutter conforming to IS:2202 (Part I) non-decorative type including ISI marked Stainless Steel butt hinges with necessary screws, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : And also Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023. 9.21.1 |
| 16 | Providing and fixing 250x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete :Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.9.96.2 |
| 17 | Providing and fixing 200 x 10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST.DSR 2023.9.97.3 |
| 18 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.9.100.1 |
| 19 | Providing and fixing Twin rubber stoppe aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.: Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.9.101.2 |
| 20 | Providing and fixing With 2nd class teak wood beading 62X19 mm fly proof galvanizedstainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.and including supply of necessary screws Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.9.51.1 |
| 21 | Providing and fixing 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. as per direction of Engineer in Chargeand Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR.18.9.3 |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. and Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2021 18.48 |
| 23 | Providing and fixing Semi rigid pipe 40 mm P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete and Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST.DSR 2023 17.28.1.2 |
| 24 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball and Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST.20 mm nominal bore, 120 mm long, weighing not less than 198 gms. DSR 2023 18.62.2 |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required andIncluding cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. W.C. pan with ISI marked white solid plastic seat and lid. DSR 2023 17.3.1 |
| 26 | Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2021 17.7.1 |
| 27 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work.DSR 2021. 17.8 |
| 28 | Providing and fixing 15 mm nominal bore C.P.brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. brass bib cock of approved quality conforming to IS:8931 and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2023. 18.50.1 |
| 29 | Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore and including supply of all materials, labour and T&P etc.but excluding G.S.T. required for proper completion of work. DSR 2023. 18.53.1 |
| 30 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. DSR 2023.17.16 A |
| 31 | Providing and fixing on wall face 110 mm diameterunplasticised Rigid PVC conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.and Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST.DSR 2023 12.41.2 Please Enable Macros to View BoQ information |
