|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil : |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: i. All kinds of soil : |
| 3 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil : |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 6 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 7 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).i. Depth not exceeding 1.5 m. |
| 8 | i. Depth exceeding 1.5 m but not exceeding 3m |
| 9 | Depth exceeding 3 m but not exceeding 4.50 m |
| 10 | Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered):i. Depth not exceeding 1.5 m. |
| 11 | i. Depth exceeding 1.5 m but not exceeding 3 m |
| 12 | Depth exceeding 3 m but not exceeding 4.50 m |
| 13 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: i. Water bound macadam road. |
| 14 | ii. Bituminous road. |
| 15 | Dismantling D.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge. i. Excluding excavation and refilling trenches after taking out the pipes.a. Upto 600mm diameter |
| 16 | b. Above 600mm diameter |
| 17 | Supply of labours. i. Fitter |
| 18 | i. Asstt. Fitter |
| 19 | ii. Skilled |
| 20 | iii. Unskilled |
| 21 | iv. Motor Mechanic |
| 22 | v. Electrician |
| 23 | vi. Carpenter |
| 24 | vii. Mason |
| 25 | Chowkidar |
| 26 | Providing and fixing of 10mm thick MS flanged joints including cost of cutting of pipes, welding, nuts, bolts & washers complete job.i. 450mm dia |
| 27 | i. 400mm dia |
| 28 | ii. 350mm dia |
| 29 | iii. 300mm dia |
| 30 | iv. 250mm dia |
| 31 | v. 200mm dia 8mm thick |
| 32 | vi. 150mm dia 8mm thick |
| 33 | 100mm dia 8mm thick |
| 34 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. (Subject to actual quantities during execution).i. 100 mm dia pipes |
| 35 | i. 150 mm dia pipes |
| 36 | ii. 200 mm dia pipes |
| 37 | iii. 250 mm dia pipes |
| 38 | iv. 300 mm dia pipes |
| 39 | v. 350 mm dia pipes |
| 40 | vi. 400 mm dia pipes |
| 41 | vii. 450 mm dia pipes |
| 42 | viii. 500 mm dia pipes |
| 43 | ix. 600 mm dia pipes |
| 44 | x. 650 mm dia pipes |
| 45 | 700 mm dia pipes |
| 46 | Dismantling of C.I. / D.I sluice valve including stacking of useful materials within a lead of 50 meters. i. Upto 150 mm diameter. |
| 47 | ii. Above 150 mm diameter. |
| 48 | Providing / Fabricating / fixing of M.S fittings viz bends of suitable degrees , tees, Double Collars, Clamps, tail Pieces of suitable degrees to be fabricated out of 6mm to 10mm thick MS. plate as per the requirement of site. This item includes cost of lead, spun yarn, R.I. cloth and lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof and should be painted with Anticorrosive Red Oxide Primer and incld. all carriages, leads lifts, etc. complete. (Subject to actual quantities during execution). |
| 49 | Supply of lead, spun Yarn, Fire Wood Kerosene including all carriages upto site of work.i. Lead |
| 50 | i. Spun Yarn |
| 51 | ii. Fire Wood |
| 52 | Kerosene |
| 53 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. i. Welded |
| 54 | Welding Charges of leaking spots /sockets/Tees/Bends for GI Pipe including hire charges of welding plant with DG Set with POL upto site of work including all leads and lifts Complete Job (Two Sides of Socket).i. 150/100mm dia |
| 55 | i. 80/65mm dia |
| 56 | ii. 50/40mm dia |
| 57 | Below 40mm dia |
| 58 | Providing fixing of Regulatory valves/Sluice Valves including cost of Flanged joints/Pipe Specials necessary including cost of nuts, bolts & washers complete Job.Zoloto/Kirloskar or any equivalent make.i. 150mm dia |
| 59 | i. 100mm dia |
| 60 | ii. 80mm dia |
| 61 | iii. 65mm dia |
| 62 | iv. 50mm dia |
| 63 | v. 40mm dia |
| 64 | 25mm dia |
| 65 | Dismantalling of spindle rod / check nuts & repairing the same for smooth functioning of regulatory valves this includes the cost of dismantalling of regulatory valves, welding charges, workshop charges including all necessary leads and lifts for all dia Regulatory Valves.i. 150/200mm dia |
| 66 | i. 300 / 350mm dia |
| 67 | ii. 450/500mm dia |
| 68 | 600mm ida |
| 69 | Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job. |
| 70 | Supply and filling of 2nd class sand / stone dust around pipes at different spots including cost of material i.e. stone dust from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing and watering including compaction after each 15cms thickness in all respects. Complete Job. |
| 71 | Clearance of wet silt from Service Reservoirs through washout pipe / buckets. The job includes dewatering charges/tools/ tackles required for the job and disposal of silt as per site requirement / as directed by the Engineer-Incharge. This item also includes scaffolding / lighting arrangement if required at site.. (Complete Job). |
| 72 | Cleaning of wall, shaft and beds of the Service Reservoirs by washing, brushing twice and cleaning silt by spraying water by pumping equipment and chemical washing of surface by spraying chemical solution. This item also includes bathing of pores then clearance of all surface after chemical bath by washing with clean water and ensuring zero alkanity. This item also includes all types of tools and plants used for execution of job. Complete Job. |
| 73 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: a. 1:3:6 or richer mix (i/c equivalent design mix) |
| 74 | b. 1:4:8 or leaner mix (i/c equivalent design mix) |
| 75 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 76 | Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 77 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. |
| 78 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 79 | b. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 80 | c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 81 | d. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 82 | Centering and shuttering including strutting, propping etc. and removal of form for: a. Foundations, footings, bases of columns etc. for mass concrete. |
| 83 | b. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 84 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level a. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 85 | b. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 86 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.i. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 87 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 88 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand). |
| 89 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. |
| 90 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. |
| 91 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: I. Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 92 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. |
| 93 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete. |
| 94 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing. |
| 95 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: a. 1:6 ( 1 cement : 6 coarse sand) |
| 96 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 97 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): a. First class Kail wood |
| 98 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. I. First class Kail wood 30mm thick. |
| 99 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. i. Pre-laminated particle board with decorative lamination on both sides. |
| 100 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a. 100x10 mm |
| 101 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : a. 100 mm |
| 102 | Providing and fixing bright finished brass 100mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete. |
| 103 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: a. Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture. |
| 104 | Finishing walls with water proofing cement paint of required shade: i. Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 105 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : 15.28.1 G.S. Sheet. |
| 106 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 107 | Engagement of Hydraulic excavator with driver and fuel Including haltage. complete job. |
| 108 | Hire charges of welding plant including Gen. Set for welding of pipes including cost of fuel, electrodes and all sorts of carriages to & fro including man power complete job. |
| 109 | Hire charges of welding plant excluding Gen. Set for welding of pipes including cost of fuel, electrodes and all sorts of carriages to & fro including man power complete job. |
| 110 | Dismantling of D.I. pipes manually/ by mechanical means including removing of rubber gasket, defrosting the pipe line by placing the same on fire wood including cost of fire wood, kerosene oil, salt including cost of all T&P and stacking of pipes and lead at siste within 50Mtrs lead as per the direction of Engineer In-charge. Complete Job.A. Including excavation and refilling trenches after taking out the pipes. a. 100mm dia upto 150mm dia |
| 111 | b. Above 150mm dia upto 300mm dia. |
| 112 | b. Above 300mm dia |
| 113 | B. Excluding excavation and refilling trenches after taking out the pipes. a. 100mm dia upto 150mm dia. |
| 114 | b. Above 150mm dia upto 300mm dia. |
| 115 | Carriage of Materials by Mechanical Transport.a. Cement/Steel avg lead 10km. |
| 116 | a. Stone Soling avg lead 7Km. |
| 117 | b. Stone avg lead 7Km. |
| 118 | c. Sand avg lead 12Km. |
| 119 | d. Coarse Agg 40mm N/S avg lead 7Km. |
| 120 | e. Coarse Agg 20mm N/S avg lead 7Km. |
| 121 | Bricks avg lead 15Km Per 1000 Bricks |
| 122 | Hire charges of load carrier/mini truck for carriage of chemicals and other allied items/equipments (excl. pipes) from Divisional Store upto various sites & locations incl carriage of dismantled salvaged pipes(serviceable/unserviceable) from site to Divl. store incl. loading ,unloading & stacking charges.(to be paid as per gate pass trip). Complete job. |
| 123 | Repairing of defunct street lights by way of replacing of damaged Bulbs, wires, switches & other necessary accessories needed for making the light functional including Returning back the salvaged material to divisional store this also includes all leads & lifts complete Job. |
| 124 | Engagement of Hydraulic Crane with driver and fuel including haltage. Complete Job. |
| 125 | Engagement of Compressor with driver and fuel haltage complete job For blockade removal. |
| 126 | Providing, installation, testing and commissioning of Air Valve including dismantling of damaged Air Valve and returning of same to divisional store. This also includes welding / pipe specials needed to successfully commissioning of Air Valve.i. 100mm dia |
| 127 | i. 80mm dia |
| 128 | ii. 50mm dia |
| 129 | 25mm dia |
| 130 | Clearing snow (with frost) from Roads, manually using picks and shovels; snow depth upto 150 mm. |
| 131 | Providing refreshment to supervisory staff & departmental labour for prolonged/continuous operation of repair/ restoration/ maintenance work of pipelines. Complete job including packing with following Menu.i. Water Bottle One litre |
| 132 | i. Water Bottle 500 ml |
| 133 | ii. Juice pac/ tin 100 ml of Standard Quality |
| 134 | iii. Boiled Egg/Omelete |
| 135 | iv. Biscuit standard Quality of 50g |
| 136 | v. Banana |
| 137 | vi. Sugar Tea |
| 138 | vii. Chicken Biryani |
| 139 | ix. Rice Plate with vegetables, Single piece meat for each person |
| 140 | i. Namkeen Tea. |
| 141 | Tent 12”x12” with matting full for one night. |
| 142 | Engagement of Hydraulic Excavator (L&T) with driver and fuel including haltage & transportation charges. Complete Job. |
| 143 | Hire charge of welding set complete with generator / POL / Welder complete job. |
| 144 | Providing laying & fixing of D.I specials for push on jointing as per IS : 9523i. Upto 600 mm dia |
| 145 | ii. Above 600 mm dia |
| 146 | Providing & laying D.I specials of class K-12 suitable for mechanical jointing as per IS : 95523i. Upto 600 mm dia |
| 147 | ii. Above 600 mm dia |
| 148 | Hire charges for:a. Core cutting / wall saw cutting machine along with operator. |
| 149 | b. Concrete drill / hammer drill machine. |
| 150 | Disposal of surplus excavated material by mechanical transport including loading, unloading and stacking a. For an avg lead of 1 km |
| 151 | a. For an avg lead of 2 km |
| 152 | b. For an avg lead of 3 km |
| 153 | c. For an avg lead of 4 km |
| 154 | For an avg lead of 5 km |
| 155 | Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig leada. 100 mm dia. pipe |
| 156 | a. 150 mm dia. pipe |
| 157 | b. 200 mm dia. pipe |
| 158 | c. 250 mm dia. pipe |
| 159 | d. 300 mm dia. pipe |
| 160 | e. 350 mm dia. pipe |
| 161 | f. 400 mm dia. Pipe |
| 162 | g. 450 mm dia. pipe |
| 163 | h. 500 mm dia. pipe |
| 164 | i. 600 mm dia. Pipe |
| 165 | j. 700 mm dia. Pipe |
| 166 | 650 mm dia. Pipe Please Enable Macros to View BoQ information |
