|
| 1 | Construction of Compound Wall's and 40 Nos. Traders Shop-cum-Godown (10' x 15' Size) at Kulia Main Market Yard under RMC, KendupatnaEarth work in excavation of foundation trenches in hard soil soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders required depth and depositing the excavated materials away from the work site with all leads and lifts including shoring shuttering & dewatering (if required) with cost of labour hire & running charges of water pumps sundries & T & P required for the work complete as directed by the Engineer in charge. |
| 2 | Supplying and filling plinth with sand well watered and rammed in layers not exceeding 23 cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalities and taxes of all materials cost of all labour sundries T&P required for the work etc complete in all respect as directed by the engineer in charge (Measurement will be taken on finished compacted section only.) |
| 3 | Filling foundation trenches and plinth with excavated earth including watering ramming and compacting in layers not exceeding 150mm thick including labour sundries T&P etc complete and as per direction of engineer -in- charge. |
| 4 | Providing and laying PCC (1:3:6) in foundation & plinth using 40mm size crusher broken HG metal of approved quality from approved quarry including hoisting. Lowering and laying concrete to the required level ramming, watering & curing etc complete including cost conveyance of all materials with all taxes and royalties all labour with sundries T&P including hire and running charges of machineries required for the work etc complete in all respect and as per the direction of Engineer-in-charge. |
| 5 | Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 6 | Providing Fly Ash brick masonry work in Super Structure with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.(A) GROUND FLOOR |
| 7 | Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-20 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost etc. complete as per direction of Engineer-in-charge. (A) COLUMN AND BEAM (UPTO 5 M.) |
| 8 | (B PLINTH BAND |
| 9 | (C) COLUMN BASE |
| 10 | (D) ROOF SLAB |
| 11 | (E) LINTEL |
| 12 | Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only.GROUND FLOOR |
| 13 | Providing and laying 20mm thick grading plaster in cement mortar (1:4) on roof slab ith 2mm and down graded size HG chips including all cost, conveyance, royality and taxes with water proof cement compound with curing etc. complete to work site for old work as per specification & direction of Engineer-in-charge. |
| 14 | Providing 6 mm. thick cement plaster in all RCC floors at all height with cement mortar of mix (1:4) with RCC surface finish smooth including closed deep chiping & slury treatment, cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge. |
| 15 | Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, T & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge. |
| 16 | White washing two coat with shell lime to receive distempering including cost of chalk powder all labour T &P ,scaffloding all taxes etc. complete as directed by the Engineer in charge. |
| 17 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Note :- Sample of Paint shall be approved before procurement and use. |
| 18 | Distempering two coats to walls with distemper of approved shade (weather coat) on new work to give an even shade including cost of distemper of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Note :- Sample of Paint & Primer shall be approved before procurement and use. |
| 19 | Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Note :- Sample of Paint & Primer shall be approved before procurement and use. |
| 20 | Supplying, fitting, fixing of M.S Iron frame rolling shutters including serew nail & cost of materials including all cost, convenyance, royalties etc. complete as per direction of Engineer-in-charge. |
| 21 | Supplying, fitting, fixing of M.S Iron frame welded composite with M.S angle with flat lovad type out side iron frame welded with wire netting or mesh including serew nail & cost of materials including all cost, convenyance, royalties etc. complete as per direction of Engineer-in-charge. |
| 22 | Cost, supplying, fitting & fixing of pre-cast concrete ventilators of size 0.38 m x 0.25 m. etc. complete as per direction of Engineer-in-charge. |
| 23 | Supplying, fitting and fixing of vitrified tile in floors of size 600mm x 600mm, 16 mm.to 25 mm thick of approved make with application of polymere modified cement based water resistant adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials,takes labour T &P etc required for the work etc. complete as per direction of Engineer-in-charge. |
| 24 | Supplying, fitting and fixing of glazed floor tiles of size 30cm x 30cm in floors, treads on steps an landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles approved quality including rubbing, polishing, cost of all materials, taxes, labour, conveyance, T &P etc required for the work site complete as per direction of Engineer-in-charge. |
| 25 | Providing, Fitting & Fixing of internal electrification including all cost of materials, labour, T&P, conveyance etc. complete as per specification & direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
