|
| 1 | Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 2 | S&F anodised aluminium snap grid frame work of grid size 605 x 605 mm for false ceiling complete all as specified. |
| 3 | S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 4 | S&F for 4 mm thick non-asbestos fibre cement building boards fixed to aluminium framework, complete all as specified.Note:- Frame work for ceiling shall be measured and paid separately) |
| 5 | S&F Wall Panelling 8mm thick consisting of plain/coloured PVC sheet inclusive of fixing arrangement to wall complete all as specified. |
| 6 | Dismantling asbestos cement/galvalume/fibre glass (corrugated or semi corrugated) sheets in roof coverings, complete all as specified. |
| 7 | Pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified. |
| 8 | Pre painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified. |
| 10 | S&F rolled mild steel work as Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified. |
| 11 | M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified. |
| 12 | M&L for Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified. |
| 13 | Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises, complete all as specified |
| 14 | M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified. |
| 15 | M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified. |
| 16 | M&L for glazed ceramic tiles in vertical surface of size 450x300x7 mm thick, laid over and including 15 mm thick rendering in cement mortar (1:3) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified. |
| 17 | Taking down cement or cement lime plaster of any description from brick or stone walls/ceiling including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified. |
| 18 | M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth complete all as specified. |
| 19 | M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified. |
| 20 | M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and smooth, complete all as specified. |
| 21 | M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over one coat of water based white pigmented alkali resistant priming paint, over 2 mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified. |
| 22 | M&L Preparation of newly plastered surfaces of ceiling & applying two coats of oil emulsion distemper white or tinted over one coat of alkali resistant priming coat complete all as specified. |
| 23 | M & L Preparation of new decorated plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of Exterior emulsion paint over a coat of alkali resistant primer complete all as specified. |
| 24 | M&L for Painting to new or prevously untreated steel surfaces of any description n exc10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified. |
| 25 | Cutting or uprooting grass incl removing old mud phuska/ roof treatment of any thickness and description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified. |
| 26 | M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base complete all as specified. |
| 27 | M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:4, finished even and smooth without using extra cement complete all as specified. |
| 28 | Providing and laying APP(Atactic Polypropylene polymer) modified prefabricated five layer 4mm thick water proofing membrane,black finished reinforces with nonwoven polyester matt consisting of a coat of bitumen primer of bitumen membrane @ 0.40 litre/sqm by the same membrane manufacturer of density at 25 degree C 0.87-0.89 Kg/litre and viscosity 70--160cps.Over the primer coat the layer of membrane shall be laid using Butane torch and ceiling all joints etc and preparing the surface complete. The vitalphysical and chemical parameters of the membarane shall be as under: Joint strength in longitudinal and transvrese direction at 23 degree C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membarane not less than 150 degree C. Cold flexibility shall be up to -2 degree C when tested in accordance with ASTM,D complete all as specified. Please Enable Macros to View BoQ information |
