|
| 1 | Taking down chowkats or frames n. exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified. |
| 2 | Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified. |
| 3 | S/F Powder coated aluminium door shutter having 150mmx44mmx2.85mm thick bottom rail, and middle rail, 100mmx44mmx3mm thick stile and top rail including necessary fitting joinery cleat,glazing packing snap beading 10mmx10mm, anodised aluminium handle 200mm long(02Nos) 200mm size auminiumm tower bolt, 01x double legged floor door stopper aluminum alloy body and tongue, 1x Aluminium body hydraulic door closer designation -3, universal type, weight between 61 to 80 Kg etc including frame of section 100mmx44mmx3mm and door shutter, top & bottom portion covered with and including 5.5mm thick tint glass with sun protection film, 01 No Mortice Lock (approved Make) with shutter and fixing complete all as specified. |
| 4 | S&F Powder coated Anodised aluminium glazed three track sliding window of frame 100x44x1.5mm and sliding shutter of section 40mmx19mm including 4mm thick sheet glass ordinary quality with sun protection film exceeding 0.5 Sqm in each pane,in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf, aluminium deco grill of weight exceeding 0.60kg/Sqm and n.exc 1.00Kg/Sqm complete all as specified. |
| 5 | S&F factory made, 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified 8.24(a) in SSR Part I complete as as specified. |
| 6 | S & F Solid PVC Door Frame of the size 50 x 47 mm made out of 5 mm PVC sheet. The door profiles are to be reinforced with 19x19mm M.S Square tube. The profile shall be cut and mitred at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed complete all as specified. |
| 7 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified & shown in SSR (Part-II) 2020 complete all as specified. |
| 8 | Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 9 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistur proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 10 | S&F MS butt hinges medium weight cold rolled of size 100 mm, complete all as specified. |
| 11 | S&F SS hinges medium weight size 100 mm, complete all as specified. |
| 12 | S&F for stainless steel 200 mm handle not less than 12 mm dia suitable for cupboard shutters with self tapping stanless steel screw complete all as specified. |
| 13 | S&F aluminium anodised, barrel tower bolts of extruded section, 125 mm length of bolt and fixed with screws, complete all as specified. |
| 14 | S&F 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete as as specified. |
| 15 | S&F Aluminium handles, cast type, anodised of 125 mm size complete all as specified. |
| 16 | Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises, complete all as specified. |
| 17 | M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified. |
| 18 | M&L for glazed ceramic tiles in vertical surface of size 450x300x7 mm thick, laid over and including 15 mm thick rendering in cement mortar (1:3) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified. |
| 19 | M & L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified. |
| 20 | S&F welded steel wire fabric ,weight n. exc 4.00 kg/sq. m fixed to steel members complete all as specified. |
| 21 | M&L for Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified. |
| 22 | M&L for Painting to new or prevously untreated steel surfaces of any description n exc10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified. |
| 23 | M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 24 | S & F Mild Steel framed work as in doors or gates of angle or other section, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging with and including either hooks and hinges or steel hanging door fittings, also fastening and fixing of Fe 290(Gde-E-165) complete all as specified. |
| 25 | S&F 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets or welded and fixed to steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upmitred angles etc as required complete all as specified. |
| 26 | M&L for 18 mm thick PVC boarding shutters of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern including taking down existing shutter complete all as specified. |
| 27 | M&L for 18 mm thick PVC boarding shelves of density exc 550 Kg per Cum but nexc 600 Kg per Cum Plain sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required, Supported for three sides with 18 mm x 18 mm PVC Ply fixed with Screw all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern including taking down existing shelves complete all as specified. |
| 28 | S&F for stainless steel 125 mm handle not less than 12 mm dia suitable for cupboard shutters with self tapping stanless steel screw complete all as specified. |
| 29 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified. |
| 30 | S&F Magnet catch for shutters as per approved sample complete all as specified. |
| 31 | Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified. |
| 32 | M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified. |
| 33 | Taking down cement or cement lime plaster of any description from brick or stone masonary walls/ceiling including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified. |
| 34 | M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and fair without using extra cement, complete all as specified. |
| 35 | M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified. |
| 36 | M&L for rendering 15 mm thick on fair faces in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and smooth, complete all as specified. |
| 37 | M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over one coat of water based white pigmented alkali resistant priming paint, over 2 mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified. |
| 38 | M&L Preparation of newly plastered surfaces of ceiling & applying three coats of oil emulsion distemper white or tinted complete all as specified. |
| 39 | M & L Preparation of new decorated plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of Exterior emulsion over a coat of alkali resistant primer complete all as specified. |
| 40 | S & F in repair, 1000 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve complete all as specified. |
| 41 | Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified. |
| 42 | Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified. |
| 43 | S&F GI tubing medium grade ISI marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified. |
| 44 | S&F GI tubing medium grade ISI marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified. |
| 45 | Demolition of cement concrete (unreinfored) in ground floors and pavings nexc 15 cm thickness (below or above ground levels) complete all as specified. |
| 46 | M&L for 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggrgate) finished even and smooth with using extra cement complete all as specified. |
| 47 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified. Please Enable Macros to View BoQ information |
