|
| 1 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site, complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames not exc 1.50 sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed. |
| 3 | Taking down chowkhats or frames exc 1.50 sqm and n exc 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed. |
| 4 | M&L for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue and pinned at joints, etc., complete all as specified and directed. |
| 5 | S&F 35 mm thick 2nd class hardwood panelled shutters (any number of panels), with panels of timber flat on both sides (feather-edged) or of veneered particle board, medium density wood particle board with commercial face veneers, complete all as specified and as directed. |
| 6 | S&F 30 mm thick 2nd class hardwood glazed and skeleton shutters (partly panelled and partly glazed), open rebated and prepared to receive glass/wire cloth, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., size of members of shutters as specified in SSR Part I, Section 8, Clause 8.20(a), all as specified and directed. |
| 7 | S&F 25 mm thick flush door shutters, solid core construction with blockboard core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 8 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with 19 mm MS square tube of 19 gauge, mitre cut at two corners and joined by inserting two Nos of 150 mm long brackets of 15 mm x 15 mm MS square tube inside the 19 mm MS square tube and suitably screwed, complete all as specified and as directed. |
| 9 | S&F factory made solid PVC moulded door shutter with wood-free EPS, 28 to 30 mm thick (styles), with 2, 4 or 6 raised panel design, with 2 mm thick moulded PVC sheet on front face and 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification, complete all as specified and as directed. |
| 10 | S&F MS butt hinges, medium weight, cold rolled mild steel, 100 mm size, fixed with screws, complete all as specified and directed. |
| 11 | S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed. |
| 12 | S&F for 150 mm length aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 13 | S&F 300 mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section, and fixing bolts and sliding bolts of extruded section or cast aluminium, fixed, complete all as specified and as directed. |
| 14 | S&F stainless steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staples, complete all as specified and as directed. |
| 15 | S&F in repair stainless steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staples, complete all as specified and as directed. |
| 16 | S&F in repair mild steel 300 mm ordinary rat-tail rod pattern spring including roller and roller plate, complete all as specified and directed. |
| 17 | M&L preparation of new wood surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 18 | S&F powder-coated anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleats for fixing, etc., complete all as specified and directed. |
| 19 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m, including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc., complete all as specified and directed. |
| 20 | S&F anodised aluminium window and ventilator shutters, side hung type without sash, aluminium section weighing 0.55 kg/m, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.), complete all as specified and directed. |
| 21 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets in ceiling, all as specified and directed. |
| 22 | S&F false ceiling of non-asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using autoclaving process conforming to IS-14862, of size 600 mm x 600 mm x 4 mm thick, fixed over and including anodised aluminium powder-coated (minimum thickness of powder coating 50 micron) snap grid framework of T-section (main and cross members) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600 mm x 600 mm. The aluminium framework shall be supported on side walls with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 mm angles, etc. Snap grid shall be supported with hangers of 4 mm dia galvanised iron wire adjusted to level and fixed to roof slabs/trusses, etc. by means of ceiling cleats made out of galvanised iron flat of size 40 mm x 3 mm, 60 mm long, and expansion hold fasteners 12.5 mm dia, 40 mm long, complete all as specified and directed. |
| 23 | S&F in repair aluminium rebated mortice lock, vertical type, size 100 mm, four lever, complete all as specified and directed. |
| 24 | S&F in repair aluminium (die-cast body) door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed. |
| 25 | S&F MS framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, frames, balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165, all as specified and directed. |
| 26 | S&F 1.25 mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push-pull or manual type, complete all as specified and as directed. |
| 27 | S&F for ball bearing for rolling shutters, complete all as specified and directed. |
| 28 | M&L for repairs of rolling shutters of any type (push-pull or manual or gear operated) after opening hood cover and without taking down rolling shutter by cleaning, greasing, oiling and replacement of rusted nuts and bolts including welding as required for smooth functioning, complete all as specified and as directed . (a) Area n exc 5 sqm each. |
| 29 | M&L for repairs of rolling shutters of any type (push-pull or manual or gear operated) after opening hood cover and without taking down rolling shutter by cleaning, greasing, oiling and replacement of rusted nuts and bolts including welding as required for smooth functioning, complete all as specified and as directed . (b) Area exc 5 sqm but n exc 10 sqm each. |
| 30 | M&L for oiling and greasing to MS shutters by removing the scales and making the shutters swing freely, complete all as specified and as directed . |
| 31 | Supply only steel ball bearing suitable for rolling shutters. Make: SKF / NBC / TATA, complete all as specified and as directed. |
| 32 | Supply and fix gearbox assembly for rolling shutters including rod, required nuts, bolts, cleats, crank handle, etc., complete to standard make and fixed in position including one coat of primer including removal of gearbox assembly and other accessories, complete all as specified and as directed . |
| 33 | Repairs to MS door shutters weighing 750-1500 kg to swing freely where movement is obstructed due to pintle hinges being inclined inwards; aligning the shutters by means of hammering, welding, oiling and lifting the shutters by means of pulley or crane, taking safety measures, complete all as specified and directed . |
| 34 | S&F in repairs MS wheel of size 125 mm dia and 32 mm wide to the bottom of MS shutters by welding/nut and bolting, taking fire safety precautions, complete all as specified and as directed . |
| 35 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and as directed . |
| 36 | S&F for 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round-headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed . |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided, all as specified and directed. |
| 38 | S&F rolled mild steel Fe 410-W (Gde E-250) quality B as in joists, channels, angles or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths, i.e. within 20 mm of the length indicated), complete all as specified and as directed. |
| 39 | M&L for preparation of new painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed. |
| 40 | M&L for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, etc., complete all as specified and as directed. |
| 41 | S&F in repair for Harrison curtain rails, mild steel, chromium plated, with fixing brackets, stops, rollers, etc., complete all as specified and as directed. |
| 42 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, concrete or brick surrounds, glazing with putty or beads, complete all as specified and as directed. |
| 43 | S&F 4 mm thick plain sheet glass, ordinary quality, and glazing with oil putty in squares n exc 0.5 sqm in each pane, all as specified and as directed. |
| 44 | S&F 4 mm thick figured glass, pin-headed type, fixed as in louvres in squares not exc 0.5 sqm in each pane, all as specified and as directed. |
| 45 | S&F vertical blind with aluminium powder-coated channel and PVC runners and fabric blinds fixed to windows as per manufacturer's instructions, complete all as as specified and directed. |
| 46 | M&L for 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labour; articles n exc 200 cu cm each, complete all as specified and as directed. |
| 47 | Taking down cement plaster on brick or concrete walls/ceiling surfaces in patches, etc. of any description including raking out joints, hacking for key, scrubbing down with water; rubbish off the premises, etc., complete all as specified and as directed. |
| 48 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided, all as specified and directed. |
| 49 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, finishing the exposed surfaces fair and even without using extra cement, all as specified and directed. |
| 50 | M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8 cm x 8 cm at the junction of roofing to vertical surfaces, complete all as specified and as directed. |
| 51 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed. |
| 52 | M&L for brickwork with sub-class 'B' bricks, using old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 53 | M&L for 10 mm thick plaster on fair faces of brickwork or concrete surfaces in cement mortar 1:6 (finished even and smooth) without using extra cement (internal surface), complete all as specified and directed. |
| 54 | M&L 15 mm thick rendering on fair faces of brickwork or concrete surfaces in cement mortar 1:4, finished fair and even on external walls, complete all as specified and as directed. Note: WPC will be measured and paid separately as supply only. |
| 55 | Supply only integral waterproofing compound, all as specified and as directed. |
| 56 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling/chajja and RCC surfaces, finished fair and even without using extra cement, complete all as specified and directed. |
| 57 | M&L for preparation on newly plastered/previously untreated surfaces of walls and applying two coats of cement-based paint over alkali primer, complete all as specified and directed. |
| 58 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil-bound distemper over a coat of chalk whiting primer on walls, complete all as specified and directed. |
| 59 | M&L for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of whitewash as in ceiling, complete all as specified and directed. |
| 60 | Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required; depth of embedded portion of holdfast measured from the face of the jamb into the wall exc half brick but n exc one brick, complete all as specified and as directed . |
| 61 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:4, complete all as specified and as directed . |
| 62 | Making good under cills or over arches, lintels and bressummers, including all pinning when necessary, complete in cement mortar 1:4, complete all as specified and as directed . |
| 63 | S&F in repair floor door stopper, 150 mm size, of aluminium alloy body and tongue, anodised, with hard drawn rod fixed in floor, complete all as specified and as directed . |
| 64 | M&L in repair for 18/19 mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework for cupboard shutters, etc., all as specified and as directed . |
| 65 | S&F teak wood lipping 18-19 mm wide and 3-6 mm thick for particle board shutters for cupboards, fixed with nails, complete all as specified and as directed. |
| 66 | S&F in repairs of continuous (piano) hinges, mild steel, bright finish or electro-galvanised, 30 mm width of flaps, complete all as specified and directed. |
| 67 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed. |
| 68 | M&L non-skid light coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors, etc., conforming to IS: 15622:2006 Grade B II (a), matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes, complete all as specified and as directed. |
| 69 | M&L glazed ceramic coloured tiles in vertical surfaces, size 350 x 250 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in CM 1:4 finished even and rough, complete all as specified and directed. Please Enable Macros to View BoQ information |
