|
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed |
| 2 | M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in wall built in cement mortar 1:6 complete all as specified and directed |
| 3 | M & L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick wall built in cement mortar 1:4 complete all as specified and directed |
| 4 | M & L for providing PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed |
| 5 | M & L for providing PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in surface channel complete all as specified and directed |
| 6 | M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick concrete surfaces and finished fair and even complete all as specified and directed |
| 7 | M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint over alkali primer complete all as specified and directed. |
| 8 | M&L for PCC 1:4:8 type D-2,(using 40 mm graded aggregate) 100 mm thick as in sub base to receive floor finishes etc complete all as specified and directed |
| 9 | M&L chequerred tiles 20 cm x20 cm x25mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20 mm thick screed bed in CM 1:4 bedded and jointed in gray cement slurry with pigment all as specified and directed |
| 10 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided all as specified and directed |
| 11 | Dismantling of stone slab and tiles of any description or thickness in floor, aprons etc laid dry all as specified and directed |
| 12 | M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) inpavings all as specified and directed |
| 13 | Forming contraction (Dummy) joint 65 mm deep x 10 mm wide filled with sealing compound grade \\"A\\" all as specified. |
| 14 | M&L for 50 mm thick Sand filling and levelling under 60mm thick interlocking paver block all as specified and directed |
| 15 | M & L for Machine pressed precast conctete interlocking paver block with gey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed |
| 16 | Dismantling fencing wire mesh, chain link fencing etc any type complete all as specified and directed. barbed wire fencing any type complete all as specified and directed |
| 17 | Dismantling wought iron or mild steel work of any description not otherwise provided all as specified and directed. |
| 18 | Excavation in post holes each n.exc 0.5Cum getting out in soft loose soils, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed |
| 19 | M&L for PCC 1:3:6 type C2 using (40mm graded aggregate) as in foundations, filling and mass concreting completeall as specified and directed |
| 20 | S&F Fe-290 Gde E-165 mild steel angle or other sections as in posts and struts in fencing etc., and similar work including cutting tops to shape as directed,drilling holes, notching for wire, including all necessary drilling holes for bolting or riveting, etc., complete all as specified and directed . |
| 21 | Supply only MS galvanised fencing of size or type as directed by Engineer-in-charge complete all as specified and directed |
| 22 | Fixing only MS chain link fencing including line wires, any mesh size and type of standars, rails, straining bolts etc. incl provn of binding wires complete all as specified and directed |
| 23 | S&F mild screw bolts(machine made) dia of neck in 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,but length of bolt exc 5cm but n.exc. 10 cm long all as specified and directed. |
| 24 | M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 25 | S & F concentrina coils fencing,600 mm dia punched tape type (50 turns per coil), fabricated out of 0.5 mm thick low carbon steel strip galvanised, conforming to IS:513 witn zinc coating not less than 230 GSM, having medium duty clips conforming to IS: 2629 each coil not weighing less than 35 kg stretch between two \\"Y\\" shaped angle iron posts fixed in position indluding typing/wire binding complete all as specified and directed. |
| 26 | M&L preparation of steel and iron surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed |
| 27 | M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed . |
| 28 | Cleaning of drains of any desription and size nexc 1 mtr on width and nexc 1 mtr depth including lifting up and removing sludge accumulated solid sludge and other foreign materials and wash down with water for smooth functioning of drainage complete all as specified and as directed. Note:- Sludge and other material obtained from cleaning shall be removed from site and burried into the ground all as specified and directed Please Enable Macros to View BoQ information |
