|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and directed. |
| 2 | M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor complete all as specified. |
| 3 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 4 | M & L for Brick work using sub class “B” bricks straight or curved on plan exc 6 metre mean radius built in CM 1:6 (Old size brick) complete all as specified and directed. |
| 5 | M&L for Brick work with sub class 'B' bricks (Old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed. |
| 6 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc complete all as specified and directed |
| 7 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 8 | M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed. |
| 9 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified. |
| 10 | M & L rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound finished fair faces of brick/concrete surfaces even and smooth (WPC shall be measured and paid for separately). |
| 11 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over a coat of min 1mm thick putty complete, all as specified and directed. |
| 12 | M&L for preparation of new plastered surfaces of ceilings and applying two coats of oil emulsion distemper (OBD) on ceiling of approved shade/tint over a coat of primer over a coat of min 1mm thick putty completeall as specified and directed. |
| 13 | Complete removal of existing treatment from wall applying two coats of oil bound distemper (OBD) over a coat of primer over a coat of wall care putty (2 mm thick) to make surface even and smooth, and complete all as specified and directed. |
| 14 | M&L for preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper of approved shade/tint complete, all as specified & directed. |
| 15 | M&L for complete removal of exisiting finish/preparing newly plastered surface on walls and applying exterior grade water proof putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine . |
| 16 | Preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 18 | M&L for Non skid coloured ceramic tiles Premium quality of Group B I (a) 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in floor over and including screed bed 15mm thick in CM 1:6 or beding layer for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed. |
| 19 | M&L for coloured, glazed, ceramic tiles Premium quality of Group B I (a) 450 x 300/600 x 300 x 7mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:4, complete all as specified & directed. |
| 20 | M&L for 18-20 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like, over 15mm thick screed bed in cement mortar (1:6) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite and rounding the edges and making holes for gas pipe as required , after dismantling of old granite complete all as specified and directed. |
| 21 | M&L for cutting chases, pinning in, making good to facing as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls. |
| 22 | S&F in repairs galvanized steel water tubing medium grade of 15mm bore dia with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 23 | S&F in repairs galvanized steel water tubing medium grade of 20mm bore dia with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 24 | S&F in repairs 20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed complete all as directed. |
| 25 | S&F in repairs 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting incl ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed 20 mm dia complete all as specified and directed. |
| 26 | S&F in repair viterous china wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap, flushing pipe, anti syphonage pipe and cistern and S&F WC PVC seat cover closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device and finally making good disturbed surface of floor complete all as specified and directed. |
| 27 | S&F in repairs water closet of approved make (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified. |
| 28 | S&F in repairs PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified. |
| 29 | S&F in repairs vitreous china wash hand basin countersunk, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. |
| 30 | S&F in repairs vitreous china wash hand basin with pedastal, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. |
| 31 | S&F in repair Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 32 | S&F in repairs Vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed |
| 33 | S&F 40 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified. |
| 34 | S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed. |
| 35 | S&F in repairs long body 15mm bore bib tap, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 36 | S&F in repairs CP angle valve, fancy type long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate complete all as specified & directed. |
| 37 | S&F in repair 15mm bore fancy type two way CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 38 | S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed suitable for countersunk wash basins and similar complete all as specified and as directed. |
| 39 | S&F in repairs CP brass towel rings, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified. |
| 40 | S&F in repairs bevelled edge mirror of selected quality glass mounted on 6mm thick commercial Ply wood backing fixed to wooden plugs with chromium plated brass screws and cup washer, complete all as specified and directed. |
| 41 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 42 | S&F in repair soap dish, of stainless steel complete, all as specified & directed. |
| 43 | S&F in repair toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete, all as specified & directed. |
| 44 | Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store |
| 45 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed. |
| 46 | S&F 110mm bore PVC (SWR) pipes 6 kg/cm2 pressue rating single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 47 | S&F 75mm bore PVC (SWR) pipes 6 kg/cm2 pressue rating single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed. |
| 48 | S&F 75 mm bore PVC (SWR) pipes 6 kg/cm2 pressue rating single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 49 | S&F 75 mm PVC (SWR) floor trap, plain with CP grating, with or without hole including jointing with solvent cement |
| 50 | S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed. |
| 51 | S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed. |
| 52 | S&F 100mm bore PVC (SWR) junction single (Single T) equal or unequal |
| 53 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal |
| 54 | S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 55 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed. |
| 56 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed |
| 57 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each and refixing in same opening after necessary easing, adjusting and repairscomplete all as specified and directed |
| 58 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 59 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture |
| 60 | S&F 150mm size stainless steel fancy type handle, complete all as specified and directed. |
| 61 | S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified. |
| 62 | S&F 200 mm long stainless steel tower bolts of extruded section (ISI marked) complete all as specified |
| 63 | S&F 100mm double legged door stopper of stainless steel with rubber base all as specified and directed by Engr-in-charge. |
| 64 | S&F 300 mm long stainless steel sliding door bolts, fancy type, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified. |
| 65 | S&F powder coated Anodised aluminium frame of approved make for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 66 | S&F Powder coated Anodised aluminium window of approved make and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 67 | S&F 4mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane, complete, all as specified and directed. |
| 68 | M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified |
| 69 | S&F peg set of 6 stainless steel fancy type,min length 600 mm all as specified & directed. |
| 70 | S&F in repairs 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 2.0 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable \\"J\\" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm complete all as directed. |
| 71 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick (total thickness) coated of green colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and as directed. |
| 72 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and directed. |
| 73 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 74 | S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed |
| 75 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 76 | M&L, for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of Cold applied bituminous oil based primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen VG- 30 grade @ 1.00 Kg/Sqm after a interval of minimum 8 hours of priming and layilg of APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method after a interval of minimum 8 hoursof hot bitumen coating by authorised applicator of manufacturer of IWL/STP/Texas India/ Hydrotech Ltd/Sikka, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil etc including removal of debris from site beyond defence land,complete all as specified nand directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator as approved. 2. Work shall be executed upto triple storied building. 3. The work shall be carried out in stages and each stage shall be passed by Engr-in-Charge and GE. |
| 77 | Providing 20mm thick plaster in ready mix plastering over roof mixed with (Water proofing compound) (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over Old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Water proofing compound (liquid) shall be measured and paid seperately. |
| 78 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 79 | M&L for RCC 1:2:4 type B1 (using 20 mm graded aggrigate)as in slab,chajjas,beam etc and similar suspended works complete, all as specified and directed. |
| 80 | Use & waste form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick, flat rough finished surface of concrete complete, all as specified and directed. |
| 81 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 82 | S&F mild steel as in posts and struts in fencing including cutting tops to shape as directed, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 of approved make of primary Producer. |
| 83 | S&F 12 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n exc 5cm long |
| 84 | S&F fibre glass reinforced translucent plain sheeting with green shade, with 50 mm side lap fixed with coach screw and washer in roof, wall or cladding etc |
| 85 | M&L preparing new steel or iron surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. |
| 86 | M&L hard core of broken stone gauge n.exc 63mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 87 | M&L 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded agg) as in sub floor as directed |
| 88 | M & L for 40 mm thick cement concrete type B0, 1:2:4 (12.5mm graded aggregate) as in flooring and similar complete all as specified and directed. |
| 89 | M&L for vitrified tectile tiles of premium qualiy 12 mm thick (square/ rectanglar) area of each tiles not exc 0.09 Sqm of any pattern and colour as directed by Engr-in-charge as in floor over and including screed bed 15mm thick in CM 1:6 for beding layer for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed. |
| 90 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 91 | S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,cup Board etc and similar work conforming to Fe 290 Gd E-165 complete all as specified. |
| 92 | M&L for Granite (of any type) work (table rubbed and polished) for wall lining (vertical surface) (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incl 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 93 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. |
| 94 | Taking down old unsv T/L of any size and capacity all as directed. |
| 95 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed Please Enable Macros to View BoQ information |
| 96 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed Please Enable Macros to View BoQ information |
